詳細検索結果
以下の条件での結果を表示する: 検索条件を変更
クエリ検索: %22%E6%9D%BE%E7%94%B0%E8%81%96%E5%AD%90%22
5,041,161件中 1-20の結果を表示しています
  • Suguru TAKATSUTO, Kiyomi KOBAYASHI, Tsuyoshi WATANABE, Hiroki KURIYAMA, Tokuo FURUSE
    Agricultural and Biological Chemistry
    1988年 52 巻 12 号 3217-3218
    発行日: 1988年
    公開日: 2006/04/05
    ジャーナル フリー
  • その所属腱索および乳頭筋について
    島田 博
    日本医科大学雑誌
    1981年 48 巻 6 号 779-789
    発行日: 1981/12/15
    公開日: 2010/10/14
    ジャーナル フリー
    Although there have been numerous articles concerning the anatomy of the atrioventricular valve in man, only a few publications have recorded the relationship between the chordae tendineae and the papillary muscles. The purpose of this paper is to study the relationship among the shape and size of the atrioventricular valve, the chordae tendineae and the papillary muscles. 50 subjects, as listed in Table 1, were analyzed by the Taniya-Hashimoto Method.
    The results obtained were as follows:
    1) The right atrioventricular valve was classified into two types: 33 cases (66%) of three irregularly shaped cusps, i.
    e
    . type I, and 17 cases (34%) of four or five cusps, i.
    e
    . type II.
    2) The average circumference of the right atrioventricular orifice (ostium atrioventriculare dextrum) was 11.
    96
    cm (
    9
    .63.15.06cm) in type I and 12.19cm (
    9
    .52.15.
    22
    cm) in type H. There existed no significant difference in the circumference of the atrioventricular orifice between type I and II.
    3) The average length of the cusp-fundus (the length of the fixed margin of the cusp) was as follows:
    type I: anterior cusp…………4.13cm (2.03-
    6
    .
    96
    cm)
    posterior cusp…………3.62cm (1.21-
    5
    .44cm)
    septalcusp……………4.21cm (3.11-
    6
    .08cm)
    type II: anterior cusp…………4.10cm (2.68-
    5
    .42cm)
    posterior cusp…………3.67cm (
    0
    .
    94
    -
    5
    .70cm)
    septal cusp……………4.43cm (2.
    96
    -
    6
    .53cm)
    4) The average width of the cusp (the maximum distance between the apex and the fundus of the cusp) was as follows:
    type I: anterior cusp…………1.86cm (1.26-2.29cm)
    posterior cusp…………1.62cm (
    0
    .62-2.
    94
    cm)
    septal cusp……………1.76cm (1.15-2.72 cm)
    type II: anterior cusp…………1.92cm (1.40-2.34cm)
    posterior cusp…………1.72cm (
    0
    .
    94
    -2.42cm)
    septal cusp……………1.84cm (1.14-2.53cm)
    The length or width of the cusp in type I was similar to that in type II.
    5
    ) The papillary muscles consisted of five groups, which were named the anterior, postlateral, postmedial, postseptal and septal muscles. The average number of the papillary muscles per right ventricle was
    5
    .
    7
    (2.
    0
    .
    9
    .
    0
    ). The chordae tendineae from the anterior papillarymuscles were attached to the anterior and posterior cusps and those from the postlateral and postmedial muscles were attached to the posterior and septal cusps. The chordae tendineae from the postseptal muscles were linked only to the septal cusp and those from the septal muscles were connected to the septal and anterior cusps.
    6
    ) The average number of the stems of the chordae tendineae from the papillary muscles were as follows:
    From the anterior papillary muscles………
    7
    .2 (2.
    0
    -14.
    0
    )
    the postlateral papillary muscles……3.
    5
    (1.
    0
    -
    8
    .
    0
    )
    the postmedial papillary muscles……4.
    0
    (1.
    0
    -
    8
    .
    0
    ) the postseptal papillary muscles……4.
    5
    (1.
    0
    -13.
    0
    ) the septal papillary muscles………
    5
    .
    7
    (2.
    0
    -12.
    0
    )
    The average n umber of the stems of the chordae tendineae per right ventricle was 24.4 (16.
    0
    -35.
    0
    ).
    7
    ) The tip of the chordae tendineae are attached to the fixed margin of the valve cusp, i.
    e
    . type A, to the ventricular surface, i.
    e
    . type
    B
    and to the free margin, i.
    e
    . type C. The average number of them were 23.4 (14.
    0
    -32.
    0
    ) in type A, 19.2 (4.
    0
    -37.
    0
    ) in type
    B
    and 68.1 (31.
    0
    -105.
    0
    ) in type C. The average number of the apexes of the chordae tendineae per right ventricle was 110.
    7
    (53.
    0
    -166.
    0
    ).
    8
    ) The average number of the chordae tendineae for the anterior cusp was 34.
    9
    (12.
    0
    -64.
    0
    ), for the posterior cusp 30.
    5
    (
    5
    .
    0
    -65.
    0
    ) and for the septal cusp 45.3 (23.
    0
    -68.
    0
    ).
  • R.G. WAN, P.J. GUO
    地盤工学会論文報告集
    1999年 39 巻 6 号 1-11
    発行日: 1999/12/15
    公開日: 2008/02/29
    ジャーナル フリー
    This paper outlines a mathematical description of the stress dilatancy behaviour of granular materials which accounts for stress level and void ratio dependencies. The consideration of these aspects has important implications in the modelling of granular material behaviour. In fact, granular material mechanical response is largely dominated by the evolution of dilatancy, fabric and void ratio histories. The starting point in this study is the well established Rowe's theory which is revisited and ultimately modified by introducing a factor linked to governing state parameters in order to describe the complete behaviour of granular materials during deformation. Numerical simulations of triaxial tests on granular materials at different void ratios and stress levels are herein presented to illustrate the model.
  • 澁谷 啓, 田中 洋行
    地盤工学会論文報告集
    1996年 36 巻 4 号 45-55
    発行日: 1996/12/15
    公開日: 2008/02/29
    ジャーナル フリー
    An empirical equation in use for estimating the pseudo-elastic shear modulus, Gf, of subsoil, associated with shear strains less than
    0
    .001% is proposed in this paper. In a series of in-situ seismic cone tests performed nationwide, the profiles of both Gf and the in-situ void ratio,
    e0
    , with depth were successfully characterised at five sites, each comprising a soft clay layer deposited in the Holocene era. The database which comprised the original data from the field and laboratory tests, coupled with similar information on well-documented Holocene clay deposits in Europe, was statistically analyzed in attempts to determine a generalised relationship with which Gf of soft clay may be reasonably estimated only from routinely available borehole data; that is
    e0
    and the current geostatic effective overburden pressure, σ'v. An empirical relationship, Gf=
    5
    , 000
    e0
    -
    1.5
    √(σ'v) (kPa), was derived from the statistical analysis applied to data from seven different clays worldwide, for which
    e0
    extended over a range between 1 and
    5
    , and the overconsolidation ratio ranged roughly between 1 and 2. The applicability of the proposed relationship was evaluated for two case records, each in which the clay exhibited unusual behavior; i.
    e
    ., the undrained shear strength remained more or less constant with depth due to the existence of artesian pressure at one site, and, at the other, Gf decreased, whereas
    e0
    increased, with depth. It was demonstrated that even in these clay deposits exhibiting exceptional profiles, the proposed relationship was capable of predicting Gf with a reasonable accuracy by determining the profiles of
    e0
    and σ'v with depth. In addition, the prediction when compared to Gmax from carefully performed laboratory cyclic tests, yielded a better estimate of Gf from the in-situ seismic survey. Despite the fact that the empirical relationship was initially designated to estimate Gf of soft clays, it may be equally applicable to sandy deposits. This was verified by comparing it to similar, and well-established, relationships developed for sands. A case record as such is also described for a loose sand deposit at Higashi-Ohgishima in Tokyo Bay which was placed in 1960's by land reclamation.
  • 黒川 美貴雄, 吉田 耕治, 永井 保嵩, 宇野 準
    Chemical and Pharmaceutical Bulletin
    1983年 31 巻 12 号 4312-4318
    発行日: 1983/12/25
    公開日: 2008/03/31
    ジャーナル フリー
    Two new partially saturated tricyclic ring systems,
    6
    ,
    6
    a,
    7
    ,
    8
    ,
    9
    , 10, 10a, 11-octahydro-11-oxodibenz [
    b
    ,
    e
    ] oxepins (3a and 3
    b
    ), and -thiepins (4a and 4
    b
    ) were synthesized. Compounds 4a and 4
    b
    were desulfurized to give a pair of isomeric 2-methylbenzoylcyclohexanes (10a and 10
    b
    ). Deuterated 4a and 4
    b
    (11a and 11
    b
    ) were prepared starting from butadiene-
    d6
    (12). The stereochemical features of 3a (trans), 3
    b
    (cis), 4a (trans) and 4
    b
    (cis) are compared with those of 10a, 10
    b
    , 11a and 11
    b
    on the basis of proton nuclear magnetic resonance data.
  • Joey
    B
    . Tanney, Leonard J. Hutchison
    Mycoscience
    2012年 53 巻 1 号 31-35
    発行日: 2012年
    公開日: 2023/03/31
    ジャーナル オープンアクセス

    The ability of Climacodon septentrionalis to immobilize and kill a mycophagous nematode (Aphelenchoides sp.) in vitro is described for the first time. Two isolates produced droplets (20–45 μm in diameter) that formed at the apices of tall, stalked, and branching secretory cells (700–1,500 μm tall). On 2% modified malt extract agar, nematodes became enveloped in the droplets, which restricted their ability to move and resulted in complete immobilization and death within several hours of contact. The rate of decomposition of the nematodes varied considerably, with most individuals persisting for weeks whereas others were degraded within several days and appeared to be colonized by dense hyphal growth. This study provides the first documentation of a non-agaricoid fungus producing secretory cells that are able to immobilize nematodes.

  • Tariq F. Alghazzawi
    Journal of Prosthodontic Research
    2017年 61 巻 3 号 305-314
    発行日: 2017年
    公開日: 2017/09/12
    ジャーナル オープンアクセス

    Purpose: The purpose of this study was to determine if the optical properties of zirconia and glass–ceramic (

    e
    .max) were affected by low-temperature degradation (aging).

    Methods: Experiment samples were fabricated with seven zirconia brands (n=10): Zenostar, Zirlux, Katana, Bruxzir, DD-BioZX2, DD-cubeX2, NexxZr; and

    e
    .max were used as a control. This resulted in a total of 80 samples in the experiment. The L*, a* and
    b
    * were measured for each sample, and then the optical properties including translucency parameter (TP), contrast ratio (CR), and opalescence parameter (OP) were calculated. The samples were aged (20, 40, 60, 80, 100h), and the optical properties were calculated after each interval.

    Results: Most zirconia brands had lower L*, higher a*, higher

    b
    * with increased aging, which visually corresponds to darker, redder, and more yellow. Aging also increased CR, lowered TP, and lowered OP.
    e
    .max was also affected by aging but still had the highest TP (23.
    9
    ±2.
    8
    ), L* (
    81
    .
    7
    ±3.4), and lowest CR (
    0
    .41±
    0
    .05) compared to any zirconia. The Zenostar had the closest TP (24.1±
    0
    .4), and L* (
    90
    .2±
    0
    .
    5
    ) values to
    e
    .max before aging. However, after 100h of aging, the DD-cubeX2 was least effected and had the highest TP (
    22
    .2±
    0
    .
    6
    ) and lowest CR (
    0
    .43±
    0
    .01) compared with other zirconia samples and highest OP (11.3±
    0
    .2) of all ceramic samples.

    Conclusions: The optical properties of zirconia and

    e
    .max materials were affected by aging with the effects increasing with time. The magnitude of change was affected by seven brands of dental zirconia.

  • M. K. Banerjee, P. S. Banerjee, S. Datta
    ISIJ International
    2001年 41 巻 3 号 257-261
    発行日: 2001/03/15
    公開日: 2007/05/31
    ジャーナル フリー
    A boron treated copper bearing HSLA steel containing austenite formers like manganese and nickel, somewhat lower in amount than that in HSLA 100 variety of steel is chosen for the study. The role of thermomechanical processing on the microstructure and mechanical properties of the above steel has been investigated. Differential scanning calorimetric study is carried out for understanding the precipitation behaviour of copper in HSLA steel under the influence of boron. The microstructure of the experimental steel is found to consist of laths of martensites and bainite. MA constituents of ribbon like morphology are observed at the lath boundaries. Higher strength properties of the steel are attributed to the presence of finely distributed precipitates of copper and microalloy carbides.
  • /, 龍岡 文夫, FUMIO TATSUOKA
    地盤工学会論文報告集
    1997年 37 巻 4 号 121-126
    発行日: 1997/12/15
    公開日: 2008/02/29
    ジャーナル フリー
    The design implication of stress-confinement effect of nonwoven geotextile is addressed. The unconfined and confined strengths of a selected needle-punched nonwoven geotextile are used to conduct a comparative design of a granular soil retaining wall based on a limit equilibrium approach. A higher wall may be allowed when considering the confined strength as compared to the unconfined strength. For a selected wall height, confined strength allows for fewer geotextile layers when compared to that designed using unconfined strength. It is recommended that stress-confinement test procedure should be standardized so that confinement effect of some nonwoven geotextiles may be incorporated into an individual wall design procedure.
  • Özkan ASLANTAŞ, Ebru Şebnem YILMAZ
    Journal of Veterinary Medical Science
    2017年 79 巻 6 号 1024-1030
    発行日: 2017年
    公開日: 2017/06/16
    [早期公開] 公開日: 2017/04/27
    ジャーナル フリー

    This study aimed to determine the prevalence of fecal carriage of extended spectrum β-lactamase (ESBL) and/or plasmidic AmpC β-lactamase (pAmpC) producing Escherichia coli among dogs (n=428) in Turkey. Polymerase chain reaction (PCR) and sequencing were used to characterize genes encoding β-lactamase and plasmid mediated quinolone resistance (PMQR). Antimicrobial susceptibility testing and PCRs for virulence genes and phylogenetic groups were also performed. Cefotaxime resistant

    E
    . coli isolates were detected in 95 (
    22
    .2%) of the swab samples. Sequencing analysis results showed occurrence of various β-lactamase genes: blaCTX-M-15 (62), blaTEM-
    1b
    (42), blaCMY-2 (
    22
    ), blaCTX-M-3 (16), blaCTX-M-1 (15), blaOXA-1 (
    9
    ) and blaSHV-12 (3) alone or in combination. The most frequently encountered phylogenetic group was group A1 (35.
    8
    %), followed by group
    D2
    (
    22
    .1%),
    B
    1 (15.
    8
    %),
    D1
    (
    9
    .
    5
    %),
    A0
    (
    7
    .4%),
    B22
    (
    5
    .3%) and
    B23
    (4.2%), respectively. PMQR genes, aac(
    6
    ’)-Ib-cr, qnr
    S1 and qnrB10 were detected in 25.3, 10.
    5
    and 1.1% of the isolates, respectively. While all isolates were susceptible to imipenem and amikacin, resistance rates to non-β-lactam antibiotics ranged from 20.
    0
    % for tobramycin to 56.
    8
    % for tetracycline. The virulence genes were only detected in 34 (36.2%) of the isolates and this isolates carried single or various combination of virulence genes of iucD, papC, papE, f17a-A and eaeA. Four isolates were identified as human virulent pandemic CTX-M-15 producing
    E
    . coli
    clone O25
    b
    :ST131/
    B
    2. To the best of our knowledge, this is the first study to show fecal carriage of ESBL/pAmpC type β-lactamase producing
    E
    . coli
    isolates among dogs in Turkey.

  • 榎 明潔, 八木 則男, 矢田部 龍一, 一本 英三郎
    土質工学会論文報告集
    1991年 31 巻 2 号 1-13
    発行日: 1991/06/15
    公開日: 2008/02/29
    ジャーナル フリー
    It has been shown after mathematical and mechanical investigation that Limit Equilibrium Method (LEM) can be considered as a method to obtain the necessary condition of Slip Line Method (SLM), and that the solution can be obtained under the condition that Fs=1 and ∂Fs/∂θ=O, where Fs is the safety factor and θ is the inclination of the plane on which the safety factor is defined. Next, the generalized LEM (GLEM) is proposed, dealing with the following points : (1) Triangular or quadrangular blocks can be treated; (2) Safety factors are defined also on interblock planes; and (3) All types of plastic problems, slope stability, bearing capacity, and earth pressure are identically formulated. Two situations regarding treatment of the moment equilibrium condition are discussed. GLEM is applied to well-known problems. The results agree well with those obtained by theoretical methods. GLEM can be used to obtain the distribution of earth pressure or bearing capacity. GLEM, Iike ordinary LEM, is very effective for the practical problems, but GLEM is more theoretical and it can result in more accurate solutions.
  • Keishi Hata, Fuyuki Sugawara, Naganori Ohisa, Saori Takahashi, Kazuyuki Hori
    Biological and Pharmaceutical Bulletin
    2002年 25 巻 8 号 1040-1044
    発行日: 2002年
    公開日: 2002/08/01
    ジャーナル フリー
    We screened the differentiation-inducing activities of 39 mushroom extracts from Akita prefecture, Japan, on the mouse osteoblastic cell line, MC3T3-
    E
    1. Sixteen phosphate buffered saline (PBS),
    8
    boiled PBS, 14 ethanol and 12 methanol extracts induced alkaline phosphatase (ALP) activities, an indicator of MC3T3-
    E
    1 cell differentiation. The enzyme activities were markedly induced by extracts of Tricholoma auratum, and we isolated the active compound from methanol extracts of this mushroom. Physical data for the isolated active compound were identical to those for (
    22E
    ,24R)-ergosta-
    7
    ,
    22
    -diene-3β,
    ,
    -triol (1). 1 induced ALP activities of MC3T3-
    E
    1 cells and promoted cell proliferation. To investigate the relationships between the chemical structure and differentiation-inducing activity of the compound, ALP-inducing activities of MC3T3-
    E
    1 cells by 1, ergosterol (2), ergocalciferol (3), cholesta-3β,
    ,
    -triol (4),
    7
    -dehydrocholesterol (
    5
    ) and cholecalciferol (
    6
    ) were tested. The enzyme activities of MC3T3-
    E
    1 cells were increased 3.
    0
    -fold by 10 μM 1 and 2.4-fold by 10 μM 4. However, 2, 3,
    5
    and
    6
    did not induce MC3T3-
    E
    1 cell ALP activity at
    0
    .1—10 μM. These results suggested that the OH groups at C-
    5
    and/or C-
    6
    of 1 and 4 played an important role in their differentiation-inducing activities on MC3T3-
    E
    1 cells. Furthermore, 1 suppressed induction of MC3T3-
    E
    1 cell apoptosis by serum starvation.
  • Yasunori SAITO, Tomoyuki MARUYAMA, Hideaki YAMAKI, Fumitoshi KOBAYASHI, Takuya
    D
    . KAWAHARA, Akio NOMURA, Mitsuyoshi TANAKA
    Optical Review
    1999年 6 巻 5 号 459-463
    発行日: 1999/10/01
    公開日: 2000/03/28
    ジャーナル フリー
    Static characteristics of two different structured InAlGaAs/InAlAs superlattice avalanche photodiodes (SLAPDs) cooled by liquid nitrogen were evaluated at a wavelength of 1.
    5
    μm. The dark current of the SLAPD having a thick superlattice layer of
    0
    .504 μm was
    5
    ×10-13 A. This was successively reduced by four orders of magnitude compared to that of the thin layer SLAPD of
    0
    .231 μm at a breakdown voltage of around 20 V. The thickened layer was effective in suppressing tunneling dark current. An output current of 1.
    7
    ×10-12 A at a bias voltage of 15 V was measured for an optical input with a wavelength of 1.
    5
    μm and a signal power of 1×10-12 W. This showed a sharp distinction from the dark current.
  • 香山 滉一郎, 森下 政夫, 張 国鋒
    粉体および粉末冶金
    2006年 53 巻 5 号 419-429
    発行日: 2006年
    公開日: 2006/12/19
    ジャーナル オープンアクセス
    The phase diagrams of the Ni-Mo-
    B
    and Ni-W-
    B
    ternary systems in the region of less than 50mol%
    B
    were constructed by thermodynamic calculation, based on the data obtained by thermodynamic measurement of the related materials. We found three ternary eutectic points and three or two ternary peritecto-eutectic points as follows:
    E1
    :L (1365K, 71.
    5
    mol%Ni-
    6
    .
    0
    mol%Mo-
    22
    .
    5
    mol%
    B
    )=(Ni)+
    Ni3B
    +
    NiMo2B2

    E2
    :L (1355K, 62.
    5
    mol%Ni-2.
    5
    mol%Mo-30.
    5
    mol%
    B
    )=
    Ni3B
    +
    Ni2B
    +
    NiMo2B2

    E3
    :L (1445K, 42.
    0
    mol%Ni-30.
    6
    mol%Mo-10.3mol%
    B
    )=(Ni)+NiMo+
    NiMo2B2

    P1:L (1812K, 34.
    9
    mol%Ni-42.3mol%Mo-
    22
    .
    8
    mol%
    B
    )+MoB=
    Mo2B
    +
    NiMo2B2

    P2:L (1633K, 42.3mol%Ni-40.4mol%Mo-17.3mol%
    B
    )+Mo=
    Mo2B
    +
    NiMo2B2

    P3:L (1812K, 53.
    5
    mol%Ni-33.
    7
    mol%Mo-12.
    8
    mol%
    B
    )+Mo=NiMo+
    NiMo2B2

    E1
    :L (1622K, 51.
    0
    mol%Ni-31.
    6
    mol%W-17.4mol%
    B
    )=(Ni)+W+
    NiW2B2

    E2
    :L (1260K, 71.
    0
    mol%Ni-
    7
    .
    0
    mol%W-
    22
    .
    0
    mol%
    B
    )=(Ni)+
    Ni3B
    +
    NiW2B2

    E3
    :L (1291K, 65.4mol%Ni-4.
    8
    mol%W-29.
    8
    mol%
    B
    )=
    Ni2B
    +
    Ni3B
    +
    NiW2B2

    P1:L (2115K, 23.
    8
    mol%Ni-43.1mol%W-33.1mol%
    B
    )+WB=
    W2B
    +
    NiW2B2

    P2:L (1657K, 48.
    9
    mol%Ni-33.1mol%W-18.
    0
    mol%
    B
    )+
    W2B
    =W+
    NiW2B2

    The calculated phase diagrams are expected to be useful for the development of new Ni-based heat-, corrosion- or wear-resistance alloys.
  • 澁谷 啓, 三田地 利之
    土質工学会論文報告集
    1994年 34 巻 4 号 67-77
    発行日: 1994/12/15
    公開日: 2008/02/29
    ジャーナル フリー
    In this paper, consideration is given as to how to characterize depth-variation for the small-strain shear modulus of natural clay sedimentation, in a state of normal consolidation. A case study was carried out for a relatively uniform clay layer deposited in the Holocene era. Initially, the effects of both strain and in-situ stress levels on secant shear modulus were carefully examined in cyclic torsion shear tests using undisturbed samples, which were recovered at different depths in a test borehole. The range of shear strain examined was between
    0
    .001% and 1%. Similar examination was made for a silty clay using reconstituted samples that were isotropically consolidated at different stress levels. On the basis of the results of these laboratory tests, together with the shear modulus from an in-situ seismic survey, the small-strain shear modulus was formulated in terms of the stress and strain levels, and linked also to undrained shear strength. Interactions of the small strain stiffness between in-situ and laboratory are discussed in depth with an attention paid to the existing aging effect in the original subsurface condition.
  • Yasuyuki Gono, Manabu Fujioka, Tamotsu Toriyama
    Journal of the Physical Society of Japan
    1970年 29 巻 2 号 255-258
    発行日: 1970/08/05
    公開日: 2007/06/01
    ジャーナル 認証あり
    The gamma-ray spectrum and the conversion-electron spectrum are measured in the decay of the Tb152 activity. The L-subshell electron lines of the 586.
    7
    keV
    22
    +→21+ transition are separated by the ion-free beta-ray spectrometer. The M1-
    E
    2 mixing ratio, δ2, and the dimensionless ratio X of
    E
    0
    -
    E
    2 mixing of the 586.
    7
    keV transition are obtained to be δ2
    0
    .16 and
    0
    .034≤X
    0
    .038, respectively. The
    E
    2 branching ratio
    B
    (
    E
    2;
    22
    +→
    0g
    +):
    B
    (
    E
    2;
    22
    +→21+):
    B
    (
    E
    2;
    22
    +→01+) is determined to be
    0
    .023 : 1.
    0
    :
    5
    .
    6
    .
  • Tsuyoshi WATANABE, Hiroki KURIYAMA, Tokuo FURUSE, Kiyomi KOBAYASHI, Suguru TAKATSUTO
    Agricultural and Biological Chemistry
    1988年 52 巻 8 号 2117-2118
    発行日: 1988年
    公開日: 2006/04/05
    ジャーナル フリー
  • Yukichi Yamaguchi, Jian-zhi Runan(Gen), Teruaki Nagahara
    Journal of the Physical Society of Japan
    1975年 38 巻 4 号 911-916
    発行日: 1975/04/15
    公開日: 2007/06/01
    ジャーナル 認証あり
    The gamma-ray spectrum and the conversion-electron spectrum are measured in the decay of the 116mIn activity. Directional correlations are also measured for 818–1293 and 1097–1293 keV cascades. The M1-
    E
    2 mixing ratio δ, and the
    E
    0
    -
    E
    2 mixing ratio μk are obtained for 818.
    7
    keV
    22
    +→21+ transition to be δ=1.52
    0.22
    +
    0.26
    , and μk
    6
    .1×10−4 respectively. The
    E
    2 branching ratio
    B
    (
    E
    2;
    22
    +→
    0g
    +):
    B
    (
    E
    2;
    22
    +→21+):
    B
    (
    E
    2;
    22
    +→01+) is determined to be
    0
    .0158:1.
    0
    :
    5
    .86.
  • Cbesseredes HORTS
    Journal of Human Ergology
    1982年 11 巻 Supplement 号 429-440
    発行日: 1982/12/15
    公開日: 2011/02/23
    ジャーナル フリー
  • OSAMU MATSUO
    地盤工学会論文報告集
    1996年 36 巻 Special 号 235-240
    発行日: 1996年
    公開日: 2012/08/13
    ジャーナル フリー
    Among the rivers damaged by the earthquake, two most severely damaged along the Yodo-gawa River are described. In the left levee, the settlement exceeded 2 m for a length of 1.4 km, with a maximum settlement of 3 m. Sand boils were observed extensively on the ground surface near the damaged dikes. Holocene sandy soil with an SPT N-value of 10 or less existed in the upper part of the subsoil profile. These facts indicate that liquefaction of the soil was the major cause of the embankment damage. The cyclic stress ratio required to cause liquefaction was
    0
    .30 as determined from cyclic triaxial tests on undisturbed samples.
feedback
Top