抄録
In this paper the experimental results on the flexural rigidity of the plywood stressed-skin panel are presented and several discussions based on the above test results are made. The experiments were conducted under the following conditions. (1) The number of joist or rib of a panel is one or two. (2) The cross section of joist or rib is 6cm wide and 12cm high. (3) Plywood skin is placed on the one side of joist alone or on the both sides of joist. (4) The thickness of plywood skin is 5.5mm or 12mm. (5) Resorcinal resin adhesive was used in gluing of plywood and joist.
