Abstract
We investigated microbial contamination of in-use antiseptics at a hospital. No microbial contamination was observed in 70 samples of 0.02% benzalkonium chloride solution (500-ml volume), 70 samples of 1% titratable I2 povidone-iodine solution (250-ml volume), or 15 samples of 0.1% ethacridine lactate solution (500-ml volume) during use in reduced amounts. Nor was any microbial contamination observed in 70 samples of cotton balls soaked in 1% titratable I2 povidone-iodine solution in canisters or cotton gauze soaked in 70% (w/v) ethanol solution in canisters.However, among 70 samples of cotton balls soaked in 0.02% benzalkonium chloride solution in canisters, 6 (8.6%) were contaminated with 104 to 106 viable cells/ml. The microbial species detected were glucose non-fermentative bacilli such as Alcaligenes xylosoxidans and Pseudomonas putida. The contaminants obtained from cotton balls soaked in 0.02% benzalkonium chloride solution did not proliferate in that solution or in distilled water but showed rapid growth in the cotton balls soaked in either of these liquids. These findings suggested that benzalkonium chloride solution tends to become contaminated when cotton balls are immersed. Therefore, cotton balls soaked in benzalkonium chloride solution are not recommended as an antiseptic. When no other choice is available, the cotton balls should be soaked in benzalkonium chloride solution at the time of usage.
