Abstract
Doxazosin mesylate (DXM) sustained release pellets were prepared by an extrusion-spheronization and fluid-bed coating technique. The core pellets containing DXM were prepared by extrusion-spheronization technique, and coated by a fluid-bed coater to control the release of DXM. The factors affecting to properties of pellets, such as diluent content, type and coating level of coating agents and plasticizers were studied in the present study. Polymethacrylate derivatives (Eudragit® RS PO and RL PO) were used for coating agents, and polyethylene glycol 6000 (PEG 6000), triethyl citrate (TEC) and castor oil were as plasticizers. To evaluate the properties of prepared pellets, the size of prepared pellets was investigated by sieve analysis technique and the morphology of pellets was evaluated by scanning electron microscopy. Through the dissolution test, factors that have an effect on the dissolution of the drug were evaluated. As the content ratio of microcrystalline cellulose (MCC) had increased, the dissolution was proportionally sustained. Eudragit® RS PO had more marked sustaining effect on the dissolution rate than Eudragit® RL PO, and the effect was more pronounced with the increased coating level. PEG 6000 was an appropriate plasticizer for DXM pellets, and increasing the content of PEG 6000, was also slightly decreasing the dissolution rate.
