Abstract
Long-term and constant-release osmotic-pump lorcaserin hydrochloride controlled-release tablets (OP LH CRTs) were prepared, to investigate the influencing factors of LH release and optimize the formulation. The mechanism of release of LH from OP LH CRTs in vitro was investigated. By establishing a high-efficiency method for measuring LH release in vitro, and optimizing it by single-factor and orthogonal experiments, the best formulation of OP LH CRTs was determined. Then, the optimal prescription of OP LH CRTs was: LH = 20.8 mg; mannitol = 100 mg, microcrystalline cellulose = 125 mg; magnesium stearate = 5 mg; cellulose acetate = 3%; polyethylene glycol 400 = 10%; dibutyl phthalate = 10%; Wetting agent and binder was 3% polyvinyl pyrrolidone (PVP) K30 ethanol solution; aperture diameter = 0.8 mm; the coating gained 3% weight. And finally, prepared OP LH CRTs were released at a constant rate in vitro and sustained for 16 h with good reproducibility between batches. Using an orthogonal experimental design, OP LH CRTs with remarkable zero-order release characteristics within 16 h were obtained, and formulation optimization was realized.
