Dental Materials Journal
Online ISSN : 1881-1361
Print ISSN : 0287-4547
ISSN-L : 0287-4547
Original Paper
Y-TZP zirconia regeneration firing: Microstructural and crystallographic changes after grinding
Daniel Patrick Obelenis RYAN, Laiza Maria Grassi FAIS, Selma Gutierrez ANTONIO, Gabriel Rodrigues HATANAKA, Lucas Miguel CANDIDO, Ligia Antunes Pereira PINELLI
Author information
JOURNAL FREE ACCESS

2017 Volume 36 Issue 4 Pages 447-453

Details
Abstract

This study evaluated microstructural and crystallographic phase changes after grinding (G) and regeneration firing/anneling (R) of Y-TZP ceramics. Thirty five bars (LavaTM and Ice Zirkon) were divided: Y-TZP pre-sintered, control (C), regeneration firing (R), dry grinding (DG), dry grinding+regeneration firing (DGR), wet grinding (WG) and wet grinding+regeneration firing (WGR). Grinding was conducted using a diamond bur and annealing at 1,000°C. The microstructure was analyzed by SEM and the crystalline phases by X-ray diffraction (XRD). XRD showed that pre-sintered specimens contained tetragonal and monoclinic phases, while groups C and R showed tetragonal, cubic and monoclinic phases. After grinding, the cubic phase was eliminated in all groups. Annealing (DGR and WGR) resulted in only tetragonal phase. SEM showed semi-circular cracks after grinding and homogenization of particles after annealing. After grinding, surfaces show tetragonal and monoclinic phases and R can be assumed to be necessary prior to porcelain layering when grinding is performed.

Content from these authors
© 2017 The Japanese Society for Dental Materials and Devices
Previous article Next article
feedback
Top