Angiogenesis play a crucial role in the regeneration of hard and soft tissue around dental titanium (Ti) implant. Enamel matrix derivative (EMD) promotes tissue regeneration and stimulates angiogenesis but its effect on the angiogenesis on Ti surfaces was never investigated. The effect of EMD on the angiogenic activity of endothelial cells cultured on pre-treated smooth Ti (PT), acidetched (A), coarse-grit blasted and acid-etched (SLA) surfaces and tissue culture plastic (TCP) in the presence or absence of EMD was investigated. EMD inhibited the proliferation/viability of human umbilical vein endothelial cells (HUVECs) growing on A and SLA Ti surfaces. EMD induced an increase in the expression of all these genes in HUVECs grown on SLA surface but not on other surfaces. Summarizing, our data show that EMD influences proliferation and expression of angiogenesis associated gene in HUVECs grown on moderately rough SLA surfaces, suggesting that EMD might promote angiogenesis following implantation.

The purpose of this study is to evaluate the precision of fit of posterior crowns made from three commercial CAD/CAM zirconia ceramics and conventional metal-ceramic technique. The external and internal marginal fit of the crowns was evaluated using direct SEM-based measurements. The data were subjected to Kruskal-Wallis, multicomparison post hoc analysis and Wilcoxon rank sum tests (α=0.05). Significant differences were observed for the external (p<0.002) and the internal (p<0.0001) marginal evaluation among the groups. No differences were observed between the buccal and lingual surfaces for the external (p=0.34) and internal (p=0.55) evaluations. No differences were showed between the external and internal measurements (p=0.37). The accuracy of fit was within the range of clinical acceptance. The lowest discrepancies corresponded to the NobelProcera group for external (39.3±11.81 μm) and internal (41.09±7.54 µm) marginal fit. The results confirmed that destructive methods are not required to assess the marginal fit of dental prosthetic crowns.

This study evaluated the impact of tooth shade on differences in color (∆E), lightness (∆L), chromaticity coordinates a*/b* (∆a and ∆b), transmittance and the degree of fluorescence of CAD/CAM leucite based ceramic (LBC). Ten disks were fabricated of LBC; Empress CAD, A2, thickness of 1.5 mm and eight disks of resin-nano-ceramic (RNC; Lava Ultimate) in different colors to simulate variations in substrate shade. The associations of LBC disks with different color substrates were analyzed with a spectrophotometer; ∆E, ∆L*, ∆a*, ∆b*, and transmittance were measured and calculated. Fluorescence was evaluated with a fluorescence system (Fluorescence System, Biopdi). All substrate shades influenced the optical properties of LBC, with regard to color, luminosity, coordinate a* and b*, transmittance, and fluorescence (p<0.001). Substrate colors with high saturation (A3.5 and C2) presented highest impact, whereas colors with lowest saturations (BL, B1) showed less impact. Substrate color influenced the optical properties of ceramic restorations.

The accuracy of prostheses affects clinical success and is, in turn, affected by the accuracy of the scanner and CAD programs. Thus, their accuracy is important. The first aim of this study was to evaluate the accuracy of an intraoral scanner with active triangulation (Cerec Omnicam), an intraoral scanner with a confocal laser (3Shape Trios), and an extraoral scanner with active triangulation (D810). The second aim of this study was to compare the accuracy of the digital crowns designed with two different scanner/CAD combinations. The accuracy of the intraoral scanners and extraoral scanner was clinically acceptable. Marginal and internal fit of the digital crowns fabricated using the intraoral scanner and CAD programs were inferior to those fabricated using the extraoral scanner and CAD programs.

The aim of this study was to investigate properties of atelocollagen/gelatin complexes (AC/Gel) and their characteristics of sustained statin release, to assess the utility of AC/Gel. AC/Gel were prepared by changing the mixing ratio of AC (0 to 40% of AC). Analysis of spectra of fluvastatin (Flu), gelatin (Gel), and Flu with Gel complex using a Fourier transform-infrared spectrometer indicates that Flu was bound to Gel through a bond involving the carboxyl and amino groups. Evaluation of characteristics of sustained release of Flu from the AC/Gel using an ultraviolet-visible spectrophotometer showed that the release rate of Flu decreased with increasing the AC content. The histological evaluation using of Sprague-Dawley rats suggest that, unlike the pure Gel sponge, the AC/Gel was not absorbed in an early stage. Therefore, the present study showed that sustained Flu release can be controlled by using an AC/Gel, suggesting the utility of this composite material.

The use of non-metal clasp denture (NMCD) materials may seriously affect the remaining tissues because of the low rigidity of NMCD materials such as polyamides. The purpose of this study was to develop a high-rigidity glass fiber-reinforced thermoplastic (GFRTP) composed of E-glass fiber and polyamide-6 for NMCDs using an injection molding. The reinforcing effects of fiber on the flexural properties of GFRTPs were investigated using glass fiber content ranging from 0 to 50 mass%. Three-point bending tests indicated that the flexural strength and elastic modulus of a GFRTP with a fiber content of 50 mass% were 5.4 and 4.7 times higher than those of unreinforced polyamide-6, respectively. The result showed that the physical characteristics of GFRTPs were greatly improved by increasing the fiber content, and the beneficial effects of fiber reinforcement were evident. The findings suggest that the injection-molded GFRTPs are adaptable to NMCDs because of their excellent mechanical properties.

Non-mechanical procedures for removing caries-infected dentin are warranted in dentistry. We previously demonstrated the marked sterilization effect for direct irradiation of low-temperature plasma using dentin model infected with Streptococcus mutans. However it requires 180 s of intraoral plasma irradiation to eliminate bacteria. We alternatively investigated whether plasma-treated water (PTW), i.e., pure water exposed to plasma in an atmosphere, has a same bactericidal activity with the plasma irradiation. In the infected dentin model, the viable S. mutans counts recovered by bur at depth of 0.8–2.4 mm from the cavity floor were 10⁴–10⁶ CFU/round bur. After PTW application for only 10 s, the count was significantly decreased to below the detection limit (2.5 CFU/round bur) or 3.0±5.0 CFU/round bur. Since the bactericidal activity of PTW is rapidly deactivated at body temperature (37°C), PTW is likely to be biocompatible and holds significant potential for non-mechanical procedures for removing caries-infected dentin.

This study aimed to investigate influences of lyophilization factors and gelatin concentration on pore structures of ACG sponge. ACG sponges of different freezing temperatures (−30, −80 and −196^oC), freezing times (1, 2 and 24 h), gelatin concentrations (0.6%AC+0.15%G, 0.6%AC+0.6%G and 0.6%AC+2.4%G), and with 500 μM fluvastatin were fabricated. Pore structures including porosity and pore size were analyzed by scanning electron microscopy and ImageJ. The cytotoxic effects of ACG sponges were evaluated in vitro. Freezing temperature did not affect porosity while high freezing temperature (−30^oC) increased pore size. The high gelatin concentration group (0.6%AC+2.4%G) had decreased porosity and pore size. Freezing time and 500 μM fluvastatin did not affect pore structures. The cytotoxicity and cell proliferation assays revealed that ACG sponges had no cytotoxic effects on human mesenchymal stromal cell growth and proliferation. These results indicate that ACG sponge may be a good biomaterial scaffold for bone regeneration.

The study aimed at introducing current available techniques for enamel microcracks (EMCs) detection, and presenting a method for direct quantitative analysis of an individual EMC. Measurements of the detailed EMCs characteristics (location, length, and width) were taken from the reconstructed images of the buccal tooth surface (teeth extracted from two age groups of patients) employing a scanning electron microscopy (SEM) and our derived formulas before and after ceramic brackets removal. Measured parameters of EMCs for younger age group were 2.41 µm (width), 3.68 mm (length) before and 2.73 µm, 3.90 mm after debonding; for older —4.03 µm, 4.35 mm before and 4.80 µm, 4.37 mm after brackets removal. Following debonding EMCs increased for both groups, however the changes in width and length were statistically insignificant. Regardless of the age group, proposed method enabled precise detection of the same EMC before and after debonding, and quantitative examination of its characteristics.

This study evaluated microstructural and crystallographic phase changes after grinding (G) and regeneration firing/anneling (R) of Y-TZP ceramics. Thirty five bars (Lava^TM and Ice Zirkon) were divided: Y-TZP pre-sintered, control (C), regeneration firing (R), dry grinding (DG), dry grinding+regeneration firing (DGR), wet grinding (WG) and wet grinding+regeneration firing (WGR). Grinding was conducted using a diamond bur and annealing at 1,000°C. The microstructure was analyzed by SEM and the crystalline phases by X-ray diffraction (XRD). XRD showed that pre-sintered specimens contained tetragonal and monoclinic phases, while groups C and R showed tetragonal, cubic and monoclinic phases. After grinding, the cubic phase was eliminated in all groups. Annealing (DGR and WGR) resulted in only tetragonal phase. SEM showed semi-circular cracks after grinding and homogenization of particles after annealing. After grinding, surfaces show tetragonal and monoclinic phases and R can be assumed to be necessary prior to porcelain layering when grinding is performed.

This study aimed to determine the appropriate pressure for airborne-abrasion by comparing the shear bond strength values for different hybrid ceramic surfaces. Two materials were used to produce hybrid ceramic specimens: Lava Ultimate and MAZIC Duro. The group of specimens whose surfaces were not subjected to airborne-abrasion was set as the control group. In the experimental group, airborne-abrasion was performed at pressures of 0.1, 0.2, and 0.3 MPa. After the adhesive and resin cement was applied, an SBS test was performed. For the MAZIC Duro block, the SBS increased monotonically with the airborne-abrasion pressure increased, peaking at 0.3 MPa. For the Lava Ultimate block, the SBS increased as the airborne-abrasion pressure increased to 0.2 MPa, and then decreased in the 0.3-MPa group, thereby peaking at 0.2 MPa. This study has confirmed that the bonding strength varies with the material used even when applying the same surface treatment.

We investigated single application of pastes containing a surface reaction-type pre-reacted glass-ionomer (S-PRG) filler on enamel demineralization. Human enamel blocks were polished using pastes containing S-PRG filler (0, 5, and 30%) and immersed in demineralizing solution for 5 days with daily change of solutions. The pH measurement and nanoindentation testing was carried out during the immersion period, and the enamel surfaces were examined using scanning electron microscopy and atomic force microscopy. A non-fluoride paste and a hydroxyapatite-containing paste were used for comparison. The specimens polished with the S-PRG filler-containing paste exhibited acid-neutralizing properties, which became stronger with an increasing S-PRG filler content. Following immersion in the demineralizing solution, specimens polished with the S-PRG filler-containing paste exhibited significantly greater hardness and elastic modulus values than those polished with the other pastes and exhibited a smoother surface than did the other specimens. Pastes containing S-PRG filler inhibits the demineralization of enamel.

Mineral trioxide aggregate (MTA) has excellent biocompatibility as well as bioactivity, including an ability to induce osteoblast differentiation. We examined the effects of the calcium-sensing receptor (CaSR) on osteogenic gene expression induced by MTA. MC3T3-E1 cells were cultured with or without (control) MTA. The expression levels of Runx2, type I collagen, and CaSR genes were analyzed by real-time polymerase chain reaction and their products were measured using enzyme-linked immunosorbent assays. The levels were increased significantly in cells exposed to MTA compared with control. Next, MC3T3-E1 cells were cultured with MTA and EGTA (a calcium chelator), because calcium ions were released continuously from MTA into the culture. Expression levels were decreased to control levels by MTA plus EGTA. NPS2143 (a CaSR antagonist) also reduced MTA-induced gene expression. These results suggest that MTA induced osteogenic gene expressions of Runx2 and type I collagen via CaSR in MC3T3-E1 cells.

The aims of this study were to identify the optimal concentration of coated orthodontic elastomerics using a layer-by-layer technique that can release chlorhexidine (CHX) as an antimicrobial material, and to measure the physical properties and antimicrobial effects of the coated elastomerics. Ethyl cellulose (EC) was used as the polymer, and five study groups with various combinations of solvents (i.e., ethanol and dichloromethane [DCM]) were included. The coated elastomerics were evaluated with a spectrophotometer to confirm the release of CHX, and their surfaces were observed by SEM. The CHX+EC+DCM group sustained antimicrobial release for the longest period (168 h, p<0.001) and exhibited the largest antimicrobial effect in an inhibition zone test using S. mutans for 7 days (p<0.05). This group had most effective physical properties and antimicrobial effects of coated elastomerics produced using a layerby-layer technique, and so its composition should be considered for use in clinical applications in orthodontics.

This study aimed to evaluate the inhibitory effect of experimental pastes containing surface pre-reacted glass ionomer (S-PRG) fillers on enamel demineralization. Bovine blocks were treated twice a day for 4 days by 7 groups; experimental pastes containing 0–30 wt% S-PRG filler (S00, S01, S05, S10, and S30), deionized water (DW) as negative control, and NaF paste (MP) as positive control. The surfaces were demineralized by acetic acid for 3 days. Mineral loss (ML) was calculated by micro-computed X-ray tomography. The treated surface was finally investigated with scanning electron microscope (SEM) and micro-focused particle induced X-ray emission (micro-PIXE). S05, S10 and S30 demonstrated significantly lower ML than S00, S01 and DW (p<0.05). S10 showed the greatest inhibitory effect, which was significantly greater than MP. The S-PRG filler containing experimental pastes demonstrated a potential to inhibit enamel demineralization. Sr ion incorporation was confirmed on the enamel surface with the experimental pastes.

Three types of bending tests —the 3-point bending test, 4-point bending test and biaxial flexural test— were performed to examine the correlations among the testing methods for dental hard resins (HRs). The results for 5 HRs showed that the bending strengths in descending order were: biaxial flexural strength>3-point bending strength>4-point bending strength. Regression analysis of the test methods indicated that the coefficients of determination were large for all test methods; the largest was for the combination of the 4-point bending test and biaxial flexural tests. The Weibull moduli ranged from 5.42 to 10.61, and a similar descending-order trend was found in the Weibull characteristic strength (S₀) of the test methods. The biaxial flexural test method is thus a valid test of the flexural strength of dental hard resins.

This study investigated the effect of cross-sectional areas on interfacial fracture toughness and bond strength of bilayered dental ceramics. Zirconia core ceramics were veneered and cut to produce specimens with three different cross-sectional areas. Additionally, monolithic specimens of glass veneer were also prepared. The specimens were tested in tension until fracture at the interface and reported as bond strength. Fracture surfaces were observed, and the apparent interfacial toughness was determined from critical crack size and failure stress. The results showed that cross-sectional area had no effect on the interfacial toughness whereas such factor had a significant effect on interfacial bond strength. The study revealed that cross-sectional area had no effect on the interfacial toughness, but had a significant effect on interfacial bond strength. The interfacial toughness may be a more reliable indicator for interfacial bond quality than interfacial bond strength.

The objective of this work was to determine the antimicrobial and antibiofilm properties of mineral trioxide aggregate (MTA) supplemented with bismuth lipophilic nanoparticles (BisBAL NPs). The antimicrobial activity of the composite MTA-BisBAL NPs was determined by the disk diffusion assay, while antibiofilm activity was analyzed by fluorescence microscopy. The cytotoxicity of MTA-BisBAL NPs was determined on human gingival fibroblasts by optical microscopy and crystal violet staining. MTA-BisBAL NPs inhibited the growth of Enterococcus faecalis, Escherichia coli, and Candida albicans and also detached the biofilm of fluorescent E. faecalis after 24 h of treatment. The addition of BisBAL nanoparticles did not significantly modify the physical properties of MTA, and cytotoxicity was not observed when MTA-BisBAL NPs was added on human gingival fibroblasts. Altogether these results suggest that BisBAL nanoparticles provide antimicrobial and antibiofilm activities to MTA while it retained their biophysical properties without cause side effects on human gingival fibroblasts.