Effect of various surface treatments on the bond strength of resin luting agent and the surface roughness and surface energy of CAD/CAM materials

抄録

The aim of this study was to examine the effect of various surface treatments on the bond strength of a resin luting agent and the surface roughness and surface energy of computer-aided design and computer-aided manufacturing (CAD/CAM) materials. Four types of CAD/CAM blocks (Shofu Block HC: BHC; GC Cerasmart: CER; VITA Enamic: ENA; and Lava Ultimate: LAV) were used. All blocks were randomly divided into eight groups based on the surface treatment as follows: no surface treatment (C), airborne-particle abrasion (AA), hydrofluoric acid etching (HA), silane coupling agent application (SL), AA/SL, HA/SL, AA/HA, and AA/HA/SL. The microtensile bond strength (µTBS), surface roughness and surface energy were measured. Three-way ANOVA revealed that all surface treatments significantly influenced the µTBS between the resin luting agent and all types of CAD/CAM materials; however, the effect of each surface treatment on surface roughness and energy was dependent on the CAD/CAM materials.