Abstract
The diffusion of elements of commercial porcelain for titanium into titanium oxide during heating was investigated. Titanium was deposited on three kinds of disk-shaped porcelains by vacuum-vaporization and the porcelains were then heated. A thin titanium oxide film was formed on the porcelains by the heating. X-ray photoelectron spectroscopy was used to characterize the surfaces of the porcelains with and without titanium oxide. Only sodium, potassium, and barium diffused into titanium oxide during heating, where they formed a complex oxide with titanium. The diffusion of these elements may be involved in the bonding of porcelain to titanium.
