Abstract
This paper presents a continuous-time equalizer adopting a clock attenuation tracking technique for digital display interface. This technique uses bottom hold circuit to detect the incoming clock attenuation. The generated loss signal is directly fed to equalizer filters, building adaptive feed-forward loops which contribute the stability of the system. The design was done in 0.18-µm CMOS technology. Simulation results summarize that eye-width of minimum 0.75UI is achieved until -33dB channel loss at 1.65Gbps. The average power consumption of the equalizer is 3.42mW per channel, a very low value in comparison to those of previous researches, and the effective area is 0.127mm2.