日本歯科理工学会学術講演会要旨集
50th General Session of the Japanese Society for Dental Materials and Devices in conjunction with International Dental Materials Congress 2007
セッションID: P-098
会議情報

ポスター発表
Feasibility of titanium casting using ceramic mold with high thermal conductivity - Case of high-temperature mold using hBN plate -
*Kanatani Mitsugu, Okawa Seigo, Watanabe Kouichi, Nakano Syuji, Hotta Noriyasu, Kobayashi Masayoshi
著者情報
会議録・要旨集 フリー

詳細
抄録
In our previous study, the feasibility of titanium casting using a room temperature mold with boron nitride (hBN) was investigated. In the present study, the temperature of the mold with hBN was 600 ºC. The improvement in the defects of titanium casting and the surface oxidization were investigated. The casting mold using hBN showed that the oxidization of the casting surface was made less at 600 ºC as well as at room temperature. The casting rate in 600 ºC mold was improved drastically in comparison with that of room temperature mold.
著者関連情報
© 2007 by The Japanese Society for Dental Materials and Devices
前の記事 次の記事
feedback
Top