抄録
This paper proposes numerical techniques to distil waveform parameters out of digitally measured data of oscillatory impulse current. The first method, to be used for liner circuit, based on a curve-fitting technique in which a smooth analytical curve is defined to fit the noise-superposed measured data. The waveform parameters are derived from the curve. The algorithm is examined its performance using a measured waveform data which is obtained from a circuit composed of linear elements only. It is not rare when impulse current is measured in a circuit with non-linear element, namely an arrester. After carefully observed behaviours of the circuit current when the non-linear element turns on and off, authors developed two algorithms capable to determine the parameters from the recorded data obtained from a circuit having a ZnO arrester. The developed algorithm processed the waveform data generated by TDG which is to be issued in 2009 as a part of IEC 61083-2. The details of the algorithm are to be demonstrated in the paper.
