抄録
As reported in previously, we established a sample preparation method for determining residual apramycin in livestock products
by LC-MS/MS, where we utilized an external calibration method. In this study, the n-hexane–trichloroacetic acid (hexane–TCA)
method by us was applied to the sample preparation method for LC-MS/MS analysis, and evaluated the linearity of the calibration
curve and the validity of the quantitative value. Bovine tissue samples (e.g., muscle, fat, and liver) were extracted using the hexane–
TCA method, and cleanup was performed using two different hydrophilic–lipophilic balance (HLB) cartridge columns and a MCX
cartridge column for these samples. The apramycin in the resulting samples was quantified by LC-MS/MS by utilizing an external
calibration curve. The validation study was performed on bovine tissues spiked with apramycin at maximum residue limits (MRLs;
muscle and fat: 0.5 ppm; liver: 5 ppm) and a value equivalent to 1/10 of MRLs (1/10 MRLs; muscle and fat: 0.05 ppm, liver: 0.5
ppm). The trueness (n = 5) values of apramycin based on the used three kinds of bovine tissue were 84.3%–92.7% at MRLs and
79.2%–97.8% at 1/10 MRLs, and the relative standard deviations (RSD) were 2.1%–5.9% at MRLs and 2.8%–5.7% at 1/10 MRLs.
The limit of quantification (LOQ) of the developed method were 0.05 mg/kg (0.05 ppm) for bovine muscle and fat and 0.5 mg/kg (0.5
ppm) for the bovine liver according to the results of the validation study.
https://ror.org/01mrvbd33 
