抄録
The present study was conducted to evaluate the effect of acidic primers on adhesive bonding to sintered alumina. Alumina disk specimens were primed with one of the following acidic materials: Acryl Bond, All Bond II Primer B, Alloy Primer, Estenia Opaque Primer, Eye Sight Opaque Primer, M.L. Primer, MR. Bond, and Super-Bond Liquid. The disks were bonded with an adhesive resin (Super-Bond) initiated with a tri-n-butylborane (TBB) derivative, and bond strengths were determined. Average bond strength before thermocycling varied from 42.9 to 44.3 MPa, whereas post-thermocycling bond strength ranged from 22.0 to 42.8 MPa. Of the nine groups assessed, reduction of bond strength after thermocycling was not significant in three: Alloy Primer, Estenia Opaque Primer, and Eye Sight Opaque Primer. It can be concluded that phosphate-based primers are recommended for bonding sintered alumina with Super-Bond resin. (J Oral Sci 52, 571-576, 2010)
