日本機械学会論文集 B編
Online ISSN : 1884-8346
Print ISSN : 0387-5016
定容容器を用いた高温・高圧場における成層燃焼 : 装置の開発と燃焼実験について
崔 圭勲大野 富美男梅原 健大聖 泰弘斎藤 孟
著者情報
ジャーナル フリー

1987 年 53 巻 489 号 p. 1641-1646

詳細
抄録
A constant-volume combustion system has been developed to reproduce direct-injection stratified-charge combustion, which is regarded as a promising concept for lean combustion. A fully premixed mixture consisting of N2, O2 and H2 was ignited to obtain a high pressure and temperature occurring at the top dead center in a real engine. The H2 in the mixture is oxidized by a part of the O2; thus, a N2-H2O-O2 mixture can be prepared before the injection of iso-octane fuel. Velocities of the swirling air in the vessel were measured by hot-wire anemometry and combustion was analyzed from schlieren photographs and combustion pressures. The results show that a compromise should be achieved between burning velocity and NOx and HC emissions by adjusting the swirl level.
著者関連情報
© 社団法人日本機械学会
前の記事 次の記事
feedback
Top