KONA Powder and Particle Journal
Online ISSN : 2187-5537
Print ISSN : 0288-4534
ISSN-L : 0288-4534
Review
High Performance Ferrite Magnets – From the Perspective of Powder Technology –
Hitoshi Taguchi
著者情報
ジャーナル オープンアクセス

1998 年 16 巻 p. 116-124

詳細
抄録
Coercivity in hexa-ferrite magnets originates in the magnetic behavior of so-called "single domain particles" with uniaxial magneto-crystalline anisotropy. The critical diameter, below which a single domain is stable, is estimated at around 1 micrometer (10-6 m) for M-type Sr-ferrite, which means that control of grain size to under a micron is significant for achieving high coercivity. For this reason studies were performed on a process for obtaining submicron powder and sintered grains, as well as on techniques for obtaining high orientation under magnetic fields when using submicron powder. For analytical purposes, Particle size distribution, magnetic properties, and lattice defects of Sr-ferrite particles were investigated to explain the observed behavior.
著者関連情報

This article is licensed under a Creative Commons [Attribution 4.0 International] license.
https://www.kona.or.jp/jp/journal/info.html
https://creativecommons.org/licenses/by/4.0/
前の記事 次の記事
feedback
Top