Mechanical Engineering Journal
Online ISSN : 2187-9745
ISSN-L : 2187-9745
Fluids Engineering (Original Paper)
Effect of a lip attached on one side of a two-dimensional nozzle upon free plane jet
Katsuya HIRATAYuya OTOMINEShuhei YASUDATomotaka MOTOKI
著者情報
ジャーナル オープンアクセス

2024 年 11 巻 6 号 p. 24-00179

詳細
抄録

This study deals with the free jet from an asymmetrical two-dimensional nozzle whose asymmetry is introduced by a lip attached on one side of the nozzle. Experiments are conducted for three Reynolds numbers; 1000, 3000 and 6000. The aspect ratio of the nozzle exit is fixed at 300, which can be large enough to research the fundamental behaviour of a plane jet. In order to clarify the effect of the lip length, the lip length l varies in a wide range of 0 – 20h, where h denotes the height of the nozzle exit. Then, the authors show such basic characteristics of the jet as mean-velocity and turbulence-intensity profiles at various downstream sections, which suggest a potential in the control of a plane jet especially concerning its deflection angle in far downstream, which vibrates with l. Besides, the authors reveal negligible Reynolds number effects more than 3000, and propose an empirical formula to predict the deflection angle.

著者関連情報
© 2024 The Japan Society of Mechanical Engineers

This article is licensed under a Creative Commons [Attribution-NonCommercial-NoDerivatives 4.0 International] license.
https://creativecommons.org/licenses/by-nc-nd/4.0/
前の記事 次の記事
feedback
Top