Mechanical Engineering Journal
Online ISSN : 2187-9745
ISSN-L : 2187-9745
Thermal, Engine and Power Engineering
Characteristics of iron and nickel diffusion in molten lead-bismuth eutectic
Yun GAOMinoru TAKAHASHIMasao NOMURA
著者情報
ジャーナル フリー

2015 年 2 巻 6 号 p. 15-00149

詳細
抄録
The characteristics of iron (Fe) and nickel (Ni) diffusion in molten lead-bismuth eutectic (LBE) were investigated experimentally by using capillary method. The diffusion coefficients of iron (Fe) and nickel (Ni) were determined from measured axial concentration distributions of Fe and Ni in LBE specimens. The correlation of the diffusion coefficients can be obtained as DFe =3.5×10-3exp (-4.15×10-4/RT) (550°C < T < 650°C) [cm2/s], DNi =1.7×10-3exp (-3.63×10-4/RT) ( 500°C < T < 650°C) [cm2/s]. The diffusion coefficient of Fe in LBE obtained is approximately the same as the result derived by Balboud - Celerier. The result of the diffusion coefficient of Ni is almost the same order of magnitude as that of Fe, in spite of much higher solubility of Ni than that of Fe in LBE. From microstructure observation by using the scanning electron microscope (SEM) and the energy dispersive X-ray spectroscopy (EDX), it is found that in case of Ni diffusion, some compounds composing 50-60% Ni, 15-20% Pb and 15%-20% Bi, were observed in the solid specimen. It is estimated that the formation of the compounds slowed down the diffusion of Ni into LBE.
著者関連情報
© 2015 The Japan Society of Mechanical Engineers
前の記事 次の記事
feedback
Top