抄録
A method which is generally applicable to predict the axially local (circumferentially averaged) heat transfer coefficient for refrigerant with oil contained flowing in horizontal evaporator tubes was developed by modifying a prediction method for pure refrigerants. The dimensionless correlation for an annular flow regime takes account of the influence of oil on an improvement or a reduction in the heat transfer, in addition to the change of the properties due to the addition of oil. For a separated flow regime, the correlations of the average heat transfer coefficients in the top part and the bottom part and their boundary angle were developed by modifying each correlation for pure refrigerants. The circumferentially averaged heat transfer coefficient for the separated flow regime can be obtained by using the solution of the steady heat conduction equation in the tube wall, to which the values calculated from the above correlations are applied as the boundary conditions at the inside surface of the tube. Which flow regime, annular or separated, prevails can be determined by the correlation of the boundary angle. The present prediction method was confirmed to be applicable to various kinds of refrigerant-oil mixture.
