Purpose: The aim of this network meta-analysis is to evaluate the accuracy of various face-scanning technologies in the market, with respect to the different dimensions of space (x, y, and z axes). Furthermore, attention will be paid to the type of technologies currently used and to the best practices for high-quality scan acquisition.

Material and Methods: The review was conducted following the PRISMA guidelines and its updates. A thorough search was performed using the digital databases MEDLINE, PubMed, EMBASE, and the Cochrane Central Register of Controlled Trials by entering research lines or various combinations of free words. The main keywords used during the search process were “photogrammetry”, “laser scanner”, “optical scanner”, “3D”, and “face”.

Results: None of the included technologies significantly deviated from direct anthropometry. The obtained mean differences in the distances between the considered landmarks range from 1.10 to -1.74 mm.

Conclusions: Limiting the movements of the patient and scanner allows for more accurate facial scans with all the technologies involved. Active technologies such as laser scanners (LS), structured light (SL), and infrared structured light (ISL) have accuracy comparable to that of static stereophotogrammetry while being more cost-effective and less time-consuming.

Purpose: The aim of this study was to review the literature on current surface modification strategies used to improve the binding efficiency of an emerging biological material, polyetheretherketone (PEEK), with bone and soft tissues.

Study selection: This review was based on articles retrieved from PubMed, Google Scholar, Web of Science, and ScienceDirect databases. The main keywords used during the search were “polyetheretherketone (PEEK),” “implant,” “surface modification,” “biomaterials,” “bone,” “osseointegration,” and “soft tissue.”

Results: The suitability of PEEK surface modification strategies has been critically analyzed and summarized here. Many cell and in vivo experiments in small animals have shown that the use of advanced modification technologies with appropriate surface modification strategies can effectively improve the surface inertness of PEEK, thereby improving its binding efficiency with bone and soft tissues.

Conclusions: Surface modifications of PEEK have revealed new possibilities for implant treatment; however, most results are based on in vitro or short-term in vivo evaluations in small animals. To achieve a broad application of PEEK in the field of oral implantology, more in vivo experiments and long-term clinical evaluations are needed to investigate the effects of various surface modifications on the tissue integration ability of PEEK to develop an ideal implant material.

Purpose: The present meta-analysis aimed to answer the following research question: In endodontically treated teeth (ETT), what is the effect of partial ferrule (PF) on fracture resistance compared to complete ferrule (CF) and/or no ferrule (NF)?

Study selection: PubMed, Scopus, Web of Science, and Google Scholar were searched for relevant studies published until May 20, 2022. In vitro studies that compared the effect of partial ferrule with that of complete ferrule and/or no ferrule on fracture resistance of ETT were included. The studies were assessed for risk of bias, and a meta-analysis was performed.

Results: Seventeen in vitro studies comprising 807 teeth were included. Nine studies were at a high risk of bias and eight presented a moderate risk of bias. Overall, the results showed that CF was superior to PF in increasing fracture resistance (SMD= 0.93, CI_95%= 0.57-1.29, P< 0.0001), with no change in the effect based on the type of teeth (P< 0.001). However, the subgroup analysis found that PF 2 mm buccal, lingual, and buccal and lingual ferrule were comparable to CF (P= 0.06). Additionally, the PF group showed significantly higher fracture resistance than the NF group (SMD= 2.02, CI_95%= 1.54-2.49, P< 0.00001).

Conclusions: Although CF design provided the highest fracture resistance to restored ETT, PF can still be a viable option for restoring ETT in cases where CF is not feasible.

Purpose This study aimed to develop an artificial intelligence (AI) model to support the determination of an appropriate implant drilling protocol using cone-beam computed tomography (CBCT) images.

Methods Anonymized CBCT images were obtained from 60 patients. For each case, after implant placement, images of the bone regions at the implant site were extracted from 20 slices of CBCT images. Based on the actual drilling protocol, the images were classified into three categories: protocols A, B, and C. A total of 1,200 images were divided into training and validation datasets (n = 960, 80%) and a test dataset (n = 240, 20%). Another 240 images (80 images for each type) were extracted from the 60 cases as test data. An AI model based on LeNet-5 was developed using these data sets. The accuracy, sensitivity, precision, F-value, area under the curve (AUC) value, and receiver operating curve were calculated.

Results The accuracy of the trained model is 93.8%. The sensitivity results for drilling protocols A, B, and C were 97.5%, 95.0%, and 85.0%, respectively, while those for protocols A, B, and C were 86.7%, 92.7%, and 100%, respectively, and the F values for protocols A, B, and C were 91.8%, 93.8%, and 91.9%, respectively. The AUC values for protocols A, B, and C are 98.6%, 98.6%, and 99.4%, respectively.

Conclusions The AI model established in this study was effective in predicting drilling protocols from CBCT images before surgery, suggesting the possibility of developing a decision-making support system to promote primary stability.

Purpose: This study aimed to determine whether denture use contributes to maintaining and improving food forms in long-term care facility (LTCFs) residents.

Methods: In 888 residents of 37 LTCFs in Japan, the following were investigated: nutritional intake status, food forms, age, sex, Barthel index (BI), clinical dementia rating (CDR), number of teeth present, number of occlusal supports, swallowing function, and use of dentures. Among all residents, those who were well-nourished and had ≤9 occlusal supports were analyzed. Based on standardized criteria, the food forms consumed by the subjects were divided into two groups: dysphagia and normal diet, which were further classified into four levels. Analysis was performed using a generalized estimation equation with the four levels of food forms as dependent variables and age, sex, BI, CDR, presence of dysphagia, number of teeth present, and use of dentures as independent variables.

Results: The final analysis included 622 (70.0%) residents. Of these, 380 (61.1%) used dentures. The analyses revealed that food form was significantly associated with age (adjusted odds ratio [OR], 0.98), BI (OR, 1.04), number of teeth present (OR, 1.03), presence of dysphagia (OR, 0.44), and use of dentures (OR, 2.82).

Conclusions: Denture use was associated with food forms among Japanese LTCF residents. This indicates that the use of dentures is related to the maintenance of food forms, even in the elderly who participate in few activities of daily living, have reduced cognitive function, and require long-term care.

Purpose To compare and evaluate the effects of different indirect composite onlay and/or core buildup materials on the fracture resistance and fracture mode of restored endodontically treated premolars.

Methods Two conventional handmade indirect composite resins (SR Nexco (NC) and Ceramage (CM)) and two core buildup materials, dual-cure composite resin (MultiCore Flow (MC)), and short fiber-reinforced composite resin (EverX Posterior (EXP)), were selected. Sixty maxillary premolars were randomly divided into six groups (n=10). Group 1 included intact teeth (INT; positive control). Mesio-occluso-distal cavity preparation and endodontic treatment was performed on the remaining premolars. Group 2 was restored with polymer-reinforced zinc oxide eugenol intermediate restorative material (IRM; negative control), whereas the experimental groups (groups 3-6) were restored with core buildup material and indirect composite onlay (MC_NC, MC_CM, EXP_NC, and EXP_CM). The specimens received compressive loading using a universal testing machine, at 45° to the long axis with a crosshead speed of 0.5 mm/min until fracture. Fracture modes were visually analyzed. Fracture resistance was measured and statistically analyzed using two-way and one-way ANOVA (α=0.05).

Results Only the type of indirect composite onlay affected the fracture resistance of the experimental groups (P=0.009). The MC_CM group showed the highest fracture resistance, which was significantly higher than that of the MC_NC group (P=0.031). No statistically significant differences were found between the INT group and other experimental groups(P>0.05). All groups had a greater incidence of restorable than unrestorable failures.

Conclusions The type of indirect composite onlay affected the fracture resistance of restored endodontically treated maxillary premolars.

Purpose: We aimed to evaluate the effectiveness of photoreactive 2-methacryloyloxyethyl phosphorylcholine (MPC) in inhibiting Candida albicans biofilm formation on polymethyl methacrylate (PMMA) and assess its mechanism and need for re-application by evaluating its interaction with salivary mucin and durability during temperature changes.

Methods: PMMA discs were used as specimens. The MPC coating was applied using the spray and cure technique for the treatment groups, whereas no coating was applied to the control. The MPC treatment (MT) groups were further differentiated based on the number of thermal cycles involved (0, 1000, 2500, and 5000). The optical density was measured to assess mucin adsorption (MA). Contact angle (CA) was calculated to evaluate surface hydrophilicity. The presence of MPC components on the PMMA surface was assessed using X-ray photoelectron spectroscopy (XPS). C. albicans biofilms were evaluated qualitatively (scanning electron microscope images) and quantitatively (colony-forming units (CFUs)). Statistical analysis was conducted using two-way analysis of variance and Tukey’s multiple comparison test.

Results: MA rate and CA increased significantly in the MT groups, which exhibited significantly fewer CFUs and thinner biofilms than those of the control group. Based on the XPS, MA, and CFU evaluations, the durability and efficacy of the MPC coating were considered stable up to 2500 thermal cycles. Additionally, a significant interaction was observed between mucin concentration and MPC efficacy.

Conclusions: The photoreactive MPC coating, which was resistant to temperature changes for approximately 3 months, effectively prevented C. albicans biofilm formation by modifying surface hydrophilicity and increasing mucin adsorption.

Purpose: This observational study aimed to elucidate the pathophysiology of subchondral cysts (SC) in the temporomandibular joint (TMJ) and examine the results of conservative therapy administered to patients with SCs in the TMJ.

Methods: The study included 41 patients with SCs, extracted from 684 consecutive patients who underwent magnetic resonance imaging (MRI). The anatomical features of SCs and positional abnormalities of the articular disc were initially evaluated using MRI. A second MRI examination was performed for 28/41 patients at 40–107 months (mean, 66 months) after the first MRI. The joint space, anteroposterior width of the condylar head (WiC), articular eminence angle (AEA), and visual analog scale of jaw pain (VAS) were assessed alongside the MRI examinations.

Results: Most SCs were present in the anterosuperior and central condyle. Disc displacement was observed in 100% of 42 TMJs with SCs. Of the 29 joints in 28 patients, SCs in 19 joints resolved with time, whereas SCs in 10 joints persisted. A significant increase in the WiC and a significant decrease in AEA and VAS scores were observed on the second MRI scan.

Conclusions: SCs tended to form in the anterosuperior and central parts of the condyle, where mechanical loading was likely to be applied. SCs are strongly associated with articular disc displacement. Two-thirds of SCs resolved over time, accompanied by resorption and osteophytic deformation of the condyle. SC might not be an indicator for the start of surgical treatment, and nonsurgical treatment could improve the clinical symptoms of patients with SCs.

Purpose To compare the 5-year follow-up outcomes of maxillary overdentures retained by bars or solitary attachments.

Methods Fifty consecutively selected fully edentulous patients experiencing problems with their conventional denture received four implants and were randomly allocated to receive a maxillary overdenture with either bar- or solitary attachment retention. Marginal bone level change (primary outcome), implant- and overdenture survival rate, clinical- and patient related outcome measures were recorded at baseline, and after 1 and 5 years. Biological and technical complications were recorded throughout the entire follow-up period.

Results After 5 years, the mean marginal bone level change was higher in the solitary attachment group (-1.41±1.38mm, P=0.024) than in the bar group (-0.99±0.96mm). Also, fewer implants survived in the solitary attachment group (89.5%, P=0.027) than in the bar group (96.3%). The overdenture survival rate was 95.0% and 91.3% in the bar and solitary attachment group, respectively. Although the clinical and patient related outcomes were favourable and did not differ significantly between the groups, the peri-implantitis incidence was 25.8% in the solitary attachment group and 5.1% in the bar group. Any technical complications were minor.

Conclusions In maxillary 4-implant overdenture therapy, the marginal bone level, implant survival rate and the number of complications are better with bar attachments than with solitary attachments. Both groups’ clinical and patient related outcome measure scores were equal throughout the entire follow-up period.

Purpose: This study investigates the mechanical and surface properties of zirconia manufactured using additive manufacturing (AM) technology and the effect of the building direction on the mechanical and surface properties.

Methods: Specimens were prepared using ZrO₂ paste (3DMix ZrO₂; 3DCeram) and a three-dimensional printing system (CeraMaker 900; 3DCeram) based on the principles of stereolithography (SLA). The mechanical properties (flexural strength, Vickers hardness, fracture toughness, elastic modulus, and Poisson’s ratio) and surface properties (chemical composition and surface observation) were evaluated for three building directions (parallel, diagonal, and perpendicular) to investigate the relationship between the building directions and the anisotropy of the mechanical and surface properties of SLA-manufactured zirconia. Statistical analysis was performed using a one-way analysis of variance and Tukey’s honestly significant difference test.

Results: The highest flexural strength was obtained for a perpendicular building direction. The flexural strength was significantly higher in the perpendicular direction than in the parallel and diagonal directions; it was also significantly higher in the diagonal direction than in the parallel direction (P<0.05). The Vickers hardness, fracture toughness, elastic modulus, Poisson’s ratio, and chemical composition did not differ significantly. Microstructural observations revealed that the layers, large crystals, and pores were more prominent in the parallel direction.

Conclusions: The flexural strength and surface structure of the tested SLA-manufactured zirconia were influenced by the building direction; however, other mechanical properties remained unaffected. The layer boundaries affected the anisotropic behavior of the builds to a certain extent, owing to the layer-by-layer production method.

Purpose: A resin-bonded bridge (RBB) is a minimally invasive prosthetic treatment option for intact adjacent teeth. However, it is contentious as to whether the mesial or distal adjacent tooth should be used as an abutment. This study aimed to investigate the potential of finite element analysis (FEA) for the selection of abutment teeth and the determination of the optimal design for anterior cantilever RBBs.

Methods: Three types of RBBs were designed to simulate loss of the maxillary left lateral incisor. The fixed-fixed RBB (FF-RBB) had one retainer each for the left central incisor and canine. Distal- and mesial-cantilever RBBs (D-CRBB and M-CRBB) had a single retainer on the central incisor and canine, respectively. Three-dimensional models for FEA were generated from computed tomography slices and dental casts. FEA was performed for each RBB to evaluate stresses in the intercuspal, protrusive, and lateral mandibular positions.

Results: The maximum principal stresses on the bridges in the intercuspal position were 141.9 MPa, 93.6 MPa, and 45.7 MPa, for the FF-RBB, D-CRBB, and M-CRBB, respectively. The stress in the D-CRBB position was greater than in the M-CRBB position in the intercuspal, protrusive, and lateral mandibular positions.

Conclusions: Based on the results, M-CRBB on the canine had a higher clinical performance than D-CRBB on the central incisor. FEA was useful for determining the optimal design of RBB for each patient.

Purpose: Maintaining good masticatory function from a young age promotes lifelong health, yet limited studies have explored masticatory performance in young individuals. We investigated the relationship of sex, age, and individual oral functions with masticatory performance among junior and senior high school students and young adults.

Methods: This cross-sectional study included students aged 12–13, 14–15, and 16–17 years (groups S1, S2, and S3, respectively) and young adults aged 20–40 years (group YA). We assessed oral functions, the number of functional teeth, and anthropometric measurements. Masticatory performance was evaluated using color-changeable chewing gum. We analyzed sex-related differences in each group and age-related differences in each sex. Multiple linear regression analysis was performed using masticatory performance as the dependent variable to investigate related factors.

Results: Among the 522 children and 100 young adults, males exhibited significantly higher masticatory performance than females in groups S1, S3, and YA. Among males, groups S2, S3, and YA exhibited significantly higher masticatory performance than group S1. Among females, group S2 exhibited higher masticatory performance than groups S1 and S3. Male sex, the maximum occlusal force and tongue pressure, and the number of functional teeth were significantly correlated with masticatory performance.

Conclusions: Masticatory function development differed by sex, with males exhibiting higher masticatory performance than females. We identified that male sex, the maximum occlusal force and tongue pressure, and the number of functional teeth were significantly associated with masticatory performance. Our findings provide a basis for masticatory performance assessment in different age groups.

Purpose: We investigated and compared the stress distribution within one- and two-piece mini-implants for overdentures with three different attachments (ball, Locator, and magnet) and two different diameters using three-dimensional finite element (3D FE) analysis and a monotonic bending test. The goal was to identify the most beneficial implant attachment system design for mini-implant overdentures with a lower risk of implant fracture.

Methods: Twelve 3D FE models simulating a mandible segment with one- and two-piece mini-implants with different attachment systems, diameters, and overdentures were created using three-dimensional computer-aided design (CAD) software. Vertical and oblique forces (45° to the longitudinal axis of the implant) of 100 N were applied to the dentures. The stress distribution was analyzed. A bending test was performed on a mini-implant (Locator, 2.4 mm) using a testing machine to quantify the load at yield stress.

Results: One-piece mini-implants showed lower maximum stress compared to two-piece mini-implants. Among the three designs, the magnet attachment systems showed the maximum stress. The maximum von Mises stress occurred at the neck of the implants, which was surrounded by cortical bone in all models, and under both loading conditions.

Conclusions: Focusing on the attachments and one- and two-piece designs of mini-implant overdentures using CAD models to reduce confounding factors affecting the stress distribution, we concluded that one-piece mini-implants tended to show lower stress compared to two-piece mini-implants. Mini-implant overdentures with Locator and ball attachments demonstrated lower stress within the implants compared to those with magnet attachments under vertical and oblique loading conditions.

Purpose: To determine postoperative periodontal and radiographic factors that predict the survival rates of abutments of removable partial dentures (RPDs).

Methods: Patients who wore RPDs for > 10 years and received supportive periodontal therapy were included. Periodontal examinations and radiographic assessments were conducted on 83 abutment teeth in 35 patients at baseline, and five years after RPD insertion. In addition to conventional factors, such as tooth mobility at 5 years, radiographic factors, such as the crown–root ratio (ΔCR ratio) and gray-level changes reflecting changes in alveolar bone density (ΔABD), were evaluated. The impact of the covariables on the 10-year survival of abutment teeth was estimated using a multivariate Cox regression model, considering multicollinearity.

Results: Patients were classified as having A2–B2 (45.7%) and B3–C2 (54.3%) tooth loss, according to the Eichner classification. A probing depth ≥ 4 mm, tooth mobility ≥ grade 1, and CR ratio ≥ 1 were found in 30.1%, 33.7%, and 51.8% of abutment teeth, respectively. The 10-year survival rate of abutment teeth was 86.7%. Multivariate analysis showed that the 10-year survival of abutment teeth was significantly associated with root canal treatment (P = 0.045, hazard ratio [HR] = 1.23), the 5-year ΔCR ratio (P = 0.022, HR = 3.20), and ΔABD on the edentulous side of the abutment teeth (P = 0.047, HR = 1.08).

Conclusions: In addition to root canal treatment, changes in the CR ratio and radiographic alveolar bone density at five years predicted the long-term survival rate of RPD abutments.

Purpose: Coronavirus disease 2019 has forced the use of remote education worldwide. In 2020, the authors conducted a fully digitized, remote flipped (RF) classroom focusing on removable partial dentures. This study aimed to evaluate the learning outcomes of the RF classroom and compare these with those of the on-site classroom.

Methods: The fourth-year dental students in 2017–2019 attended on-site flipped classroom (OF; n=70) or on-site lecture classroom (OL; n=67), and those in 2020 (n=58) attended the RF classroom. Lecture videos and text were provided online in the OF and RF groups, while only the text was given to the OL group. Individual and group tests were conducted to assess knowledge acquisition one week after all the classes ended. A one-way analysis of variance following Tukey’s test was performed to compare individual/group test scores among the OF, OL, and RF groups. Multilevel linear regression analysis was performed to identify the factors associated with an increase in each test score.

Results: The mean individual test scores in the RF and OF groups were significantly higher than in the OL group (P<0.01). The mean group test score in the RF group was significantly higher than in the OF and OL groups (P<0.001). The multilevel analysis identified remote and flipped classroom styles in the individual test, and the remote style in the group test, as significant effective factors in learning (P<0.05).

Conclusions: These results suggest that the RF classroom is more effective than the on-site lecture in knowledge acquisition in undergraduate prosthodontic education.

Purpose This in vitro study aimed to investigate the long-term performance, stability, and fracture mode of monolithic hybrid abutment crowns, and the effect of different materials on the implant-abutment interface (IAI).

Methods Eighty monolithic hybrid abutment crowns luted on titanium bases were manufactured from 3Y-TZP zirconia (ZY3), “Gradient Technology” zirconia (ZY35), 5Y-TZP zirconia (ZY5), lithium disilicate ceramic (LDS), zirconia-reinforced lithium silicate ceramic (ZLS), polymer-infiltrated ceramic network (MHY), polymethylmethacrylate (PMA), and 3D-printed hybrid composite (PHC) (n = 10 for each material). Eighty implants (Camlog Progressive-Line, diameter: 3.8 mm) were embedded in accordance with ISO standard 14801, and crowns were mounted. After artificial aging (1.2 × 10⁶ cycles, 50 N, thermocycling), intact specimens were loaded 30° off-axis in a universal testing machine until failure.

Results Seven specimens in the PHC group failed during artificial aging, and all the others survived. There were two subgroups based on the one-way analysis of variance and Dunnett’s test (P < 0.05) of the mean fracture load values. The first comprised Z3Y, ZY35, Z5Y, and LDS, with mean fracture loads between 499.4 and 529.7 N, while the second included ZLS, MHY, and PMA, with values in the 346.2-416.0 N range. ZY3, ZY35, ZY5, and LDS exhibited irreversible, visible deformations of the implant shoulders with varying dimensions after load-to-fracture tests.

Conclusions Crowns made of LDS, ZLS, MHY, and PMA may act as potential stress breakers, and prevent possible deformation at IAIs. Further clinical studies need to assess if these materials also withstand relevant loads in-vivo.

Purpose: This study investigates the effects of hollow structures, added by selective laser sintering (SLS), on the mechanical properties of a Co-Cr alloy for providing an optimal structural property to the framework components of removable partial dentures (RPDs).

Methods: The specimens produced using the 3D data of the dumbbell-shaped cylinders were divided into four groups based on the manufacturing method: Cast, Mill, SLS-solid, and SLS-hollow. Tensile tests were performed to measure the mechanical properties of the specimens. The mechanical property values among the four groups were statistically compared using the Kruskal-Wallis test followed by the Steel-Dwass test (α = 0.05).

Results: The median elastic modulus was the largest in the Cast, followed by SLS-solid, Mill, and SLS-hollow, with no significant differences observed between all conditions. The median ultimate tensile strength was the largest in the order of SLS-solid, Mill, SLS-hollow, and Cast. The median 0.2% proof stress was the largest in SLS-solid, followed by SLS-hollow, Cast, and Mill. The median elongation was the highest in the order of Mill, SLS-solid, SLS-hollow, and Cast.

Conclusions: With the addition of hollow structures, the elastic modulus decreased while the mechanical strength and proof stress remained high in SLS specimens. In addition, the ISO 22674 standard for dental metals was met, suggesting that SLS may be a possible method to design RPD frameworks with high strength and optimal structural properties.

Purpose: To analyze and compare the emergence angle (EA) using two measurement methods, conventional and modified (EA-GPT and EA-R), the EAs of all-natural teeth were evaluated and classified to derive a suitable and predictable clinically applicable measurement method.

Methods: Natural human teeth (n=600) were classified, cleaned, and thoroughly inspected. Teeth were scanned using an intraoral scanner. The scanned data were analyzed using three-dimensional analysis software for both methods with several points per surface. A Bland-Altman analysis was used for statistical analysis and a heat map and a nonparametric density plot to assess the repetition and distribution. An XGBoost regression model was used for prediction.

Results: The EA-R method showed significantly different values compared to the EA-GPT method, representing an increase of 17.5–20.7% for the proximal surfaces. An insignificant difference between the two methods was observed for other surfaces. Different teeth classes showed variation in the normal range, thereby resulting in a new classification of the EA for all-natural teeth based on the interquartile range. The machine learning gradient boosting model predicted conventional data with an average mean absolute error of 0.9.

Conclusions: Variations in the natural teeth EA and measurement methods, suggest a new classification for EA. The established artificial intelligence method demonstrated robust performance, which could aid in implementing EA measurement in prosthetic designs.

Purpose To describe a technique utilizing a novel prosthetic scan body, that assists the accurate merging of multiple scans (intra- and extraoral) of the interim prosthesis and edentulous arch with dental implants, during rehabilitation with a fixed implant-supported prosthesis.

Methods Intraoral scanning (Trios 3, 3Shape) of an interim implant-supported prosthesis was performed, subsequently followed by another scan, using five scan bodies, placed onto the implant abutments (SRA, Bone level, Straumann AG). Successively, the newly designed prosthetic scan bodies were attached to the abutment copings of the interim prosthesis, for extraoral scanning. Utilizing an implant library designed for the prosthetic scan body, the three scans were merged, providing all the necessary information for the digital design and fabrication of the fixed implant-supported prosthesis.

Conclusions The described clinical technique enabled effective and accurate superimposition of intra- and extraoral scans of the implant prosthesis. Superimposed data, including that of the position of dental implants and anatomy of soft tissue, provided essential information for the fabrication of a definitive implant-supported prosthesis. The novel prosthetic scan bodies attached to the implant prosthesis, assisted in merging intra- and extraoral scans, thus facilitating the rehabilitation of maxillary and/or mandibular edentulous dental arches. Further research is required to assess the accuracy of the proposed technique.

Purpose To introduce a digital workflow for the prediction of facial aesthetics, especially in patients with dentation deformity caused by maxillofacial trauma.

Methods Cone-beam computed tomography (CBCT) and three-dimensional facial scans of patients with radiographic prostheses were collected. The aforementioned data were uploaded to ProPlan CMF software and merged to generate a virtual patient with craniofacial hard tissue, realistic facial soft tissue, and remaining dentition. The radiographic prostheses were scanned to form a digital cast, which was fitted with its CBCT image to create the virtual prostheses. Postoperative facial soft tissue was simulated according to the movement of the virtual prostheses. An appropriate virtual diagnostic prosthesis plan was selected by the patient and dentist. Subsequently, prosthetically driven implant guide and restoration were designed and fabricated.

Conclusions A virtual patient was successfully constructed. A 4-mm protrusion of the virtual prosthesis was chosen. Subsequently, implant surgery was performed, and dental prostheses were fabricated based on this location. The fusion of the postoperative facial scan and preoperative facial prediction was found to be coincident. This technique can effectively predict facial aesthetic features of patients with maxillofacial trauma, facilitate communication with patients, reduce chairside time, and guide the multidisciplinary design of implant placement and restoration fabrication.

Patients: This clinical report describes the process for fabricating a double-crown-retained removable dental prosthesis combining a fiber-reinforced composite and zirconia using digital technology. An 83-year-old woman presented with gingival swelling around the maxillary right premolar. The swollen tooth was the abutment tooth of a cross-arch fixed partial denture. An intraoral scanner (IOS) and computer-aided design/manufacturing as digital technology were used to plan treatment with a double-crown-retained removable dental prosthesis. A metal-free prosthesis using zirconia for the primary crown and fiberglass-reinforced composite resin for the secondary crown was planned, and the patient consented to the treatment plan. After autotransplantation of a tooth as one of the abutments, the IOS was used to obtain digital scans of the prepared surface of the abutment teeth, opposing dentition, and occlusal relationships. First, primary crowns were milled using zirconia. Next, the intraoral scanner obtained a pick-up impression of the primary crowns, and secondary crowns were designed and milled from the fiber-reinforced composite. After delivery, the patient expressed satisfaction with the functionality, esthetics, and fit of the double-crown-retained removable dental prosthesis.

Discussion: Digital technology offers many advantages such as efficient fabrication of double crowns, reduced material costs, improved biocompatibility, and good aesthetics of metal-free materials.

Conclusions: This clinical report describes the application of digital technology for the fabrication of a double-crown-retained removable dental prosthesis combining a fiber-reinforced composite and zirconia, resulting in patient satisfaction.