Preprints of the National Meeting of JWS

Browse

Search
Browse

All issues

Preprints of the National Meeting of JWS

Displaying 51-100 of 189 articles from this issue

Download citation

Show all abstracts

Structural Joining and Microstructure Control of Iron-Aluminide Intermetallic Compound by Appling Automatic Micro-Arc Welding

Soshu Kirihara, Wataru Myougadani, Yuta Yamamoto, Toshihide Horii, You ...

Session ID: 229
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.51.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (483K)
Plasma-arc Brazing of Al Alloy and Zinc-coated Steel

shuhei watanabe, yoshihiro nagayo, takuya tsumura, kazuhiro nakata

Session ID: 230
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.52.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (298K)
Development of Long Life Inductor for Electromagnetic Tube Expansion

Yoshihaya Imamura, Takayoshi Sugisaki

Session ID: 231
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.53.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (566K)
Effect of Material Softening and Flow on Joint Strength in Butt Welding of Plastics with Heating Tool

Junichiro NIHARA, Kenji NAKAMURA, Ken MOHTAI, Shinobu SATONAKA, Chihir ...

Session ID: 232
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.54.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (254K)
Nondestructive Evaluation of Defects and Material Characteristics in Joint Materials with Infrared Thermography

Naoto IYONAGA, Takehiro OSE, Shinobu SATONAKA, Chihiro IWAMOTO

Session ID: 233
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.55.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (607K)
Investigation for Evaluating the Depth of a Carburized Layer by Means of Ultrasonic Technique

Tatsuya Yoshimoto, Hideki Horikawa, Tomiko Yamaguchi, Kazumasa Nishio, ...

Session ID: 234
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.56.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (169K)
Effect of Heat Treatment Conditions on Ti Composite Coatings in Cold Spray

Noboru Suenaga, Mitsuru Nakamura, Takayuki Kuwashima, Tetsuya Sonoda, ...

Session ID: 235
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.57.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Cold spray is a new technology for deposition of materials in a solid state. Blended Ti powders are deposited on stainless steel substrate by low pressure cold spray equipment. The present work is investigated the effect of heat treatment conditions on Ti composite coatings.

View full abstract

Download PDF (413K)
Fabrication and characterization of NiAl Intermetallic Compound coating by Cold spraying

Tetsuya Sonoda, Takayuki Kuwashima, Mitusru Nakamura, Noboru Suenaga, ...

Session ID: 236
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.58.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Cold spray is deposition of materials in a solid state. The purpose of this study is to examine that fabrication of NiAl intermetallic compound coating by cold spray technology. It is found that Uniform coating was formed by Postannealing of Ni/Al binary coatings.

View full abstract

Download PDF (568K)
Surface Modification of Pure Titanium using YAG Laser

Yutaka Yoneshoh

Session ID: 237
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.59.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (354K)
Study on thermal spraying by Direct diode laser

Junji Morimoto, Taisuke Ozaki, Tosifumi Kobayashi, Nobuyuki Abe, Masah ...

Session ID: 238
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.60.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

The main objective of laser coating is improve the the wear and corrosion poperties of a specified metalic substrate by creating a coating of material on its surface with superior properties.

View full abstract

Download PDF (1579K)
Cure characteristics of Ag filler conductive adhesive by semiconductor laser irradiation

Osamu Kurino, Tadashi Takemoto, Hiroshi Nishikawa

Session ID: 239
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.61.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (197K)
Characteristics of Stainless Steel Welding Produced by High-Brightness and High-Efficiency Lasers

Yousuke Kawahito, Yohei Abe, Terumasa Onishi, Masami Mizutani, Seiji K ...

Session ID: 240
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.62.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (433K)
Study of Butt Joint Welding of Aluminum Alloy by Filler-Added Laser-Arc Hybrid Welding Method

Jing-bo Wang, Hitoshi Nishimura, Seiji Katayama, Masami Mizutani

Session ID: 241
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.63.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Welding of the butt joint of aluminum alloy by filler-added laser-arc hybrid welding (FLA welding) method was studied. It was found that the gap tolerance of 8 mm plate could be increased by FLA welding method comparing with conventional laser-arc hybrid welding method.

View full abstract

Download PDF (342K)
Prevention of porosity by oxygen addition in laser and laser/arc hybrid welding

Lin Zhao, Susumu Tsukamoto, Goro Arakane, Tomohiro Sugino

Session ID: 242
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.64.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

The effect of oxygen on porosity has been investigated both in laser and laser/arc hybrid welding. The results indicate that the porosity is effectively prevented by small amount of oxygen addition to the molten pool. This is because the keyhole is stabilized by oxygen.

View full abstract

Download PDF (174K)
Molten pool shape and strength of dissimilar materials joints welded by pulse YAG laser

Yukio Miyashita, Kosei Oyama, Masashi Takemi, Hua Wang, Yoshiharu Muto ...

Session ID: 243
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.65.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (219K)
Articulated arm system for CO2 laser processing

AKIRA OHATA

Session ID: 244
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.66.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Articulated arms provide a flexible solution to CO2 laser processing.

View full abstract

Download PDF (184K)
Edge Effect on Shrinkage in Saddle Shape Laser Forming

Ryo Arimatsu, Tetsuya Akiyama, Toshio Terasaki

Session ID: 245
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.67.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (169K)
Effect of Extra-Heating on Bowl Laser Forming

Hayato Makino, Tetsuya Akiyama, Toshio Terasaki

Session ID: 246
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.68.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (184K)
TEM Observation and EDS Analysis of Laser Direct Joints between Dissimilar Materials

Takashi Namie, Yousuke Kawahito, Kouji Nishimoto, Seiji Katayama

Session ID: 247
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.69.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1524K)
High-Power Fiber Laser Weldability under Low-Vacuum

Yohei Abe, Masami Mizutani, Yousuke Kawahito, Seiji Katayama

Session ID: 248
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.70.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (769K)
Plume behavior and refraction index distribution during fiber laser welding

Shinpei Oiwa, Yousuke Kawahito, Seiji Katayama, Petr Vondrous

Session ID: 249
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.71.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (542K)
High-Power Laser Butt Welding of Thick High-Strength Steel Plate with Hot Wire

Terumasa Onishi, Shigeki Saitou, Masami Mizutani, Yousuke Kawahito, Se ...

Session ID: 250
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.72.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (410K)
Study on High-efficiency Fillet Welding using Hot-wire Laser Welding Process

KENJI SHINOZAKI, MOTOMICHI YAMAMOTO, KOUTA KADOI, DAISUKE TAKAYANAGI, ...

Session ID: 251
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.73.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (86K)
Establishment of High-Quality Cladding Process using Fiber Laser

Kenji SHINOZAKI, Motomichi YAMAMOTO, Kota KADOI, Masaki SAKATA, Sosuke ...

Session ID: 252
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.74.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (380K)
Development of Laser Removal Pre-process of Galvannealed Layers during Laser Lap Welding on Galvannealed Steel Sheets

Kenji SHINOZAKI, Motomichi YAMAMOTO, Kota KADOI, Takuya OZAKI, Yusuke ...

Session ID: 253
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.75.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (993K)
Gap Effect on Defect Formation during Laser Lap Welding for Galvannealed Steel Sheets

Kenji Shinozaki, Motomichi Yamamoto, kouta Kadoi, Yusuke Katakami, Tak ...

Session ID: 254
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.76.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (313K)
Factors Enhancing Fatigue Strength of Weld Joint by Laser Peening

YOSHIHIRO SAKINO, YUJI SANO, You-Chul KIM

Session ID: 301
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.77.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

The main factor affecting fatigue strength was investigated by comparing fatigue strength of laser-peened welded joint with that after stress relief annealing. As a result, it was clarified that compressive residual stress generated by laser peening was the main factor.

View full abstract

Download PDF (281K)
Effect of Laser Peening on Residual Stress of Welds of High Strength Steel

Yoshihiro SAKINO, Kenichi YOSHIKAWA, Yuji SANO, You-Chul KIM

Session ID: 302
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.78.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

To evaluate applicability of laser peening for high strength steel, surface residual stress in fillet weld zone of HT780 were measured after laser peening. As a result, laser peening can generate large compressive residual stress even in the weld zone of high strength steel.

View full abstract

Download PDF (251K)
Propagation of Fatigue Crack in Laser Beam Welded Joints of High Strength Steel

Mikihito HIROHATA, Kousuke YAMAMOTO, Koutarou INOSE, You-Chul KIM

Session ID: 303
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.79.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

For ensuring the fatigue strength of the welding joints of high strength steel, laser beam welding is noted. In this paper, results of fatigue tests are reported for elucidating the fatigue crack propagation behavior of laser welding joints of high strength steel (HT780).

View full abstract

Download PDF (242K)
Effect of Crack Propagation Behavior on Electric Potential Difference

Detection and Monitoring of Crack Initiation and Propagation by FSM and Electric Field Analysis (I)

Mikihito HIROHATA, Kentaro OKU, Masahiko KITAZAWA, You-Chul KIM

Session ID: 304
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.80.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

For elucidating crack propagation behavior in FSM, an electric field analysis program was developed and its validity was verified. The effect of the crack propagation behavior on the electric potential difference in FSM was investigated by the program.

View full abstract

Download PDF (59K)
Basic Research on Various Factor Influences of Fracture Behavior in Metals by Using Interface Element.

SEIGO TOMIYAMA, TSUYOSHI HAJIMA, HISASHI SERIZAWA, HIDEKAZU MURAKAWA

Session ID: 305
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.81.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Since the ductile fracture strength is affected by various factors such as yield stress, work hardening, phase transformations and so on, in this study, the effects of these factors on the fracture strength estimated by the interface element were examined.

View full abstract

Download PDF (223K)
Effect of Stress Induced Transformation on Crack Growth

HIDEKAZU MURAKAWA, HISASHI SERIZAWA, TAKEAKI TSUJIMOTO, SEIGO TOMIYAMA

Session ID: 306
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.82.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

A new solution method to simulate both static and pseudo-dynamic crack propagation was developed for clarifying the limit of stable crack growth and the fracture strength of metal with a crack was found to be increased by the stress induced phase transformation at the crack tip.

View full abstract

Download PDF (279K)
Effects of Mismatching of Strength and Geometry on Deformation Behavior and Strength in HT950 Steel Welded Joints

Houichi KITANO, Shigetaka OKANO, Masahito MOCHIZUKI, Tomoya KAWABATA, ...

Session ID: 307
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.83.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

This paper provides the ultimate tensile strength, which have strength and geometric mismatch, by FE analysis. We assumed that the welded joints only have the angular deformation and the unevenness as the geometric mismatch.

View full abstract

Download PDF (982K)
Effect of weldment on strength of low yield strength steel

Yasuo Yoshioka, Masahiro Yamane, Osamu Nakahama

Session ID: 308
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.84.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1259K)
Effect of Bead Shape of Lase Welded Lap Joint for Peeling Strength

Toshio Tearasaki, Takanori Kitamura, Shinji Watanabe

Session ID: 309
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.85.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (814K)
Experiments of Repair/Reinforcement by Welding under Cyclic Loads

Repair/Reinforcement by Welding for Steel Bridges in Service (_V_)

Yasuo AGANO, Shouichiro FUJIHIRA, Sang-Hyong LEE, You-Chul KIM

Session ID: 310
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.86.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

In this study, performing partial penetration welding with various combinations of consumables and structural steels under cyclic loads, initiation and propagation of crack were investigated and the fractography examination was carried out.

View full abstract

Download PDF (433K)
Weld bond toughness in Al-Si steel

Hai Qiu, Terumi Nakamura, Susumu Meguro, Susumu Tsukamoto, Kazuo Hirao ...

Session ID: 311
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.87.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (119K)
Influence of Internal Stress Distribution on Fatigue Strength in Pad Welded Joint

TETSURO NOSE

Session ID: 312
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.88.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (247K)
Study on Cracks at Galvanization of Corner of Formed Square Steel Tube STKR

Part 1 Experiment on Hot Dip Galvanizing of STKR Given Tensile Stress

AKIHIDE YOSHIDA, TADAO NAKAGOMI, MASANORI MORI, HIROYUKI ITO

Session ID: 313
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.89.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

It is pointed out that the plating crack enters in the corner part when the cold forming corner type steel tube is plated. This is labeled cracks at plated parts. We advance generating mechanism of cracks and prevention measure.

View full abstract

Download PDF (53K)
Study on Cracks at Galvanization of Corner of Formed Square Steel Tube STKR

Part2 Numerical Analysis of 2D Finite Element Procedure

Akihide Yoshida, Tadao Nakagomi, Masanori Mori, Hiroyuki Ito

Session ID: 314
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.90.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Heat stress is generated in the cold forming corner type steel When it is plated. The study bear out generation status of heat stress of the cold forming corner type steel tube.

View full abstract

Download PDF (505K)
Thermal stability of Zr-based metallic glass joints formed by ultrasonic bonding

Takao Yamasaki, Masakatsu Maeda, Yasuo Takahashi

Session ID: 315
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.91.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (237K)
Effect of Impurity Elements on Microcracking Susceptibility of Multipass Weld Metal of Alloy 690

Kazuyoshi Saida, Akira Taniguchi, Yuki Nomoto, Kazutoshi Nishimoto

Session ID: 316
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.92.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Effect of impurity elements on microcracking susceptibility in multipass welds of alloy 690 was investigated. Microcracking was attributed to the grain boundary segeregation of P and S, and it could be prevented at the condition of P+1.2S<20ppm.

View full abstract

Download PDF (241K)
Effect of Cr content on stress corrosion cracking susceptibility of shielded metal arc weld metals for 600 type alloy in high temperature pressurized pure water

Satoru Nishikawa, Yukihiko Horii, Kenji Ikeuchi

Session ID: 317
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.93.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

The weld metal subjected to the SR+LTA containing Cr content with 18.5mass% was observed G phase on the grain boundary. As it was detected P of high content from G phase, it was considered that segregated P at the grain boundary was taken into G phase by the SR+LTA.

View full abstract

Download PDF (453K)
Changes in microstructural and mechanical properties of Alloy617 weld metal with aging at 700 ºC.

Hiroyuki OGIWARA, Shinji NAKANISHI, Takaya MIZUMOTO, Kazuyoshi SAIDA, ...

Session ID: 318
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.94.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1002K)
The development of composite consisting of cast iron / mild steel using fusion welding

TSUGUO HONDA, hironori kuroki, tomiko yamaguchi, kazumasa nishio

Session ID: 319
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.95.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1294K)
Optimization of Surfacing Conditions of Alumina Particle on the Dispersibility by Friction Surfacing

Dai NAKAMA, Kazuyoshi KATOH

Session ID: 320
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.96.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (395K)
TEMPERATURE DISTRIBUTION IN FRICTION SURFACING OF SUS304 PLATE WITH SUS304 ROD

Fahridin USMONOV, Toshiaki Yasui, Masami Tubaki, Masahiro Fukumoto

Session ID: 321
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.97.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

In friction surfacing, appropriate frictional heating by the consumable rod upon substrate form coating on the substrate. Temperature distribution inside the consumable rod and under coating was studied for friction surfacing of S45C and SUS304 plate with S45C and SUS304 rods.

View full abstract

Download PDF (59K)
Tensile Strength of High Carbon Steel Joint by Autocompleting Friction Welding Method

Masaaki KIMURA, Daisuke UTSUMI, Masahiro KUSAKA, Koichi KAIZU

Session ID: 322
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.98.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1234K)
Improving joint property of SUS310S pipe friction welds

Akihiro ICHIHARA, Masaaki KIMURA, Masahiro KUSAKA, Koichi KAIZU

Session ID: 323
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.99.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (2559K)
Study on Friction Welding of Austenitic Stainless Steel and Various Carbon Steel for Machine Construction

Masayoshi Hasegawa, Ryoma Kaku

Session ID: 324
Published: 2009
Released on J-STAGE: November 20, 2009

DOIhttps://doi.org/10.14920/jwstaikai.2009f.0.100.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (124K)

feedback

Top

Register with J-STAGE for free!