詳細検索結果

浅田孝の子供に対する環境開発の手法に関する研究

横浜こどもの国を中心にして

松下和輝, 木下光

日本建築学会計画系論文集
2017年 82 巻 736 号 1531-1541
発行日: 2017年
公開日: 2017/06/30

DOI https://doi.org/10.3130/aija.82.1531

ジャーナルフリー

抄録を表示する抄録を非表示にする

Takashi
Asada
belonged to Kenzo Tange's laboratory and starting with Reconstruction planning of Hiroshima City (1946-47), he was the main partner when Kenzo Tange designed Hiroshima peace center (1952) as well as Kagawa prefectural Government Hall (1958). Independently, he also designed Showa Station of Antarctica (1957), managed World Design Conference (1960) etc, and had played the important role in various fields beyond architecture planning and design. In 1961,
Asada
established "KANKYO KAIHATSU CENTER" with the meaning "research center for environmental development and design" which is the first consultant of urban and regional city planning in Japan. "KANKYO KAIHATSU RON" (1969) which means "theory of environmental development" was the only book written by
Asada
. He attended to establish the theory of environmental development and carry various works out through his concept as one of pioneers in Japan however
Asada
's theory of Environmental Development has not been clarified specifically.
In his actualized works, there are 2 projects for children: Kodomo no Kuni as national children land in Yokohama (1962-72) and the development in Goshikidai of Kagawa (1965-71). This study aims to clarify
Asada
's method of environmental development for children through the analysis of 2 actualized projects as a part of his method of environmental development as follow.
(1) Collecting information on projects and discourse concerned with children by
Asada
to clarify his theory for children.
(2) Analysis of reflection of
Asada
's theory for children in program, planning and design of Kodomo no Kuni.
(3) Analysis of organization frameworks and decision-making process in Kodomo no Kuni and ascertaining his role in 10 organizations.
(4) Clarify points of common and development between Kodomo no Kuni and the development in Goshikidai.
Throughout the analysis, the following 5 points have become clear.
1.
Asada
had his theory that children should act and play voluntarily in nature environment for education planned and design as less as possible. He believe in this environment encourages them self-development. In development of Goshikidai, outdoor activities had been taken in the program of school education with cooperation of governor and superintendent of education in Kagawa Prefecture.
2.
Asada
played an important part in site selection for Kodomo no Kuni. And that action changed the plan of Kodomo no kuni from smaller site(36ha) to the bigger site(96ha).
3. At first, the plan of Kodomo no Kuni was programmed to focus on artificial facilities like Disneyland.
Asada
denied it and planned minimal facilities for children's various outdoor activities. The completed plan followed
Asada
's concept and program generally.
4.
Asada
trended to introduce master plan like the cluster pattern and distributed facilities dispersively in each zone separated along the topographic features to suppress unnecessary development on nature in planning design of each project consistently.
Asada
tried to reuse architectural remains in Kodomo no Kuni and planned Goshikidai including existing temples, industry or facilities for children's activities and sightseeing.
5.
Asada
not only did planning and design, but also suggested concerning PR, management or personal affairs in each organizations of Kodomo no Kuni. In implementation process, he organized group formed of specialists, designers and architects in different field in order to design the environment comprehensively without differentiating fields and scales.
Asada
used the method of environmental development in cross-sectional fields to control organization in both decision-making and design and connected several organizations to design the environment comprehensively like Kodomo no Kuni.
抄録全体を表示

PDF形式でダウンロード (9807K)
浅田　泰次先生

日本植物病理学会報
2018年 84 巻 2 号 75-76
発行日: 2018年
公開日: 2018/06/05

DOI https://doi.org/10.3186/jjphytopath.84.75

ジャーナルフリー

PDF形式でダウンロード (341K)
追悼　浅田隆夫先生

許義雄

体育・スポーツ哲学研究
2020年 42 巻 1 号 1-3
発行日: 2020年
公開日: 2020/09/25

DOI https://doi.org/10.9772/jpspe.42.1_1

ジャーナルフリー

PDF形式でダウンロード (660K)
Echinostoma hortense
ASADA
, 1926の生殖細胞染色体と受精に関する研究

草浦勉

岡山医学会雑誌
1966年 78 巻 7-9 号 929-942
発行日: 1966/09/30
公開日: 2009/02/13

DOI https://doi.org/10.4044/joma1947.78.7-9_929

ジャーナルフリー

抄録を表示する抄録を非表示にする

The adult worms were collected from rats 30 days after infection with metacercariae of Echinostoma hortense which cysted on the gill of Misgurunus anguillicaudatus. The testis and ovaries of matured worms were extracted from live adult worms and there were stained with 45% aceto-orcein solution for chromosome observations. The results of the study are briefly presented as follows.
1. Ten bivalent chromosomes can be seen in both primary spermatocytes and oocytes, which signifies the diploid number of chromosomes to be 20 (2n=20).
2. A spermatocyte is divided into four spertides after binary division.
3. The spermatozac after being transformed into the same number of spermatides, pass through vas deferens and wanter out to the seminal vesicle, and after copulation there, they are ejected into the uterus.
4. When the ovum has moved to the center of ovary, it reaches the leptotene stage and is inseminated.
5. The cocyte after insemination enters into egg-shell at ootype and then migranting towards the uterus, under goes two mitotis (meitotic) division and is transformed to prenucleus.
6. Sperms are gradually enlarged within the oocyte and forming the nucleus, now are transformed to sexual pronucleus. Oocytes that have formed sexual pronucleus in the center of uterus undergo karyogamy near she periphery of uterus, and after the first cleavage of ovum, there are formed two cells of a large and a small one each having 2n=20 chromosomes. Subsequently, they undergo the second cleavage to form one large cell and three small cells. At the time of spawning the ovum is composed of the primary and secondary polocytes and a cell at the fourth cleavage as well as a vitelline cell just before disintegration.
抄録全体を表示

PDF形式でダウンロード (3249K)
作庭資料-山水路地石立

永松義博

造園雑誌
1993年 57 巻 1 号 34-38
発行日: 1993/08/27
公開日: 2011/07/19

DOI https://doi.org/10.5632/jila1934.57.34

ジャーナルフリー

抄録を表示する抄録を非表示にする

福岡県浮羽郡古井町延寿寺の浅田家に残る, 作庭に関する古文書 “山水路地石立” について紹介する。文書は江戸末期の弘化3年 (1846) に書かれてあり, 地方に伝わる造庭資料として興味深い。
浅田家は当時, 久留米藩の印銭方を勤める家柄であった。この作庭書には “藝阿弥流大秘傳” と印されており, 書院庭路地, 山水石, 原庭平路地, 中島, 出島, 水門, 飛石等について記されている。
抄録全体を表示

PDF形式でダウンロード (1768K)
Investigation of Properties of Foundry Pig Irons and Development of Centrifugally Cast Rolling Rolls

Juntaro HONDA

Transactions of the Iron and Steel Institute of Japan
1984年 24 巻 2 号 85-100
発行日: 1984年
公開日: 2006/09/08

DOI https://doi.org/10.2355/isijinternational1966.24.85

ジャーナルフリー

抄録を表示する抄録を非表示にする

Mr. Chairman, officers of ISIJ, ladies and gentlemen. Let me open this lecture by expressing my sincere gratitude for the honorable
Asada
Prize you have awarded to me today. I am particularly pleased to consider it as a recognition on the part of the iron and steel industry of what little contribution I, a man of foundry, have been fortunate enough to make towards progress of the steel industry in their attainment of world's leading position.
抄録全体を表示

PDF形式でダウンロード (4251K)
A New Electrode-type Mold Level Sensor for Continuous Casting Machine

Hiroshi IMADA, Yoshitaka NIMURA

Transactions of the Iron and Steel Institute of Japan
1982年 22 巻 12 号 991-996
発行日: 1982年
公開日: 2006/09/08

DOI https://doi.org/10.2355/isijinternational1966.22.991

ジャーナルフリー

抄録を表示する抄録を非表示にする

This paper is concerned with the new development of an electrode-type mold level sensor and a mold level control system with this sensor for continuous casting machines. The principle is based on the electrical conduction of powder floating on molten steel.
The resistance between the mold powder and molten metal, which is proportional to the distance between the electrode and metal surface, is measured by the electrode inserted in the mold powder. A servo-device allows the electrode smoothly to follow the movement of the free surface of the molten steel. The mold level control system using this level sensor was analyzed by a simulation model. It was confirmed that the level sensor was able to accurately detect the movement of level for actual operation.
The performance of the electrode-type level sensor is as follows: 1) measurement range: 500mm, 2) maximum follow-up control speed: 70mm/s, and 3) response time: 1s.
It has been confirmed that the electrode-type level sensor makes possible the control of the molten steel level within±3.5mm, even when electrode-magnetic stirring is applied.
抄録全体を表示

PDF形式でダウンロード (1016K)
ミンスキー的循環,不安定性と逆循環的財政政策

二宮健史郎

季刊経済理論
2005年 42 巻 3 号 96-103
発行日: 2005/10/20
公開日: 2017/04/25

DOI https://doi.org/10.20667/peq.42.3_96

ジャーナルフリー

抄録を表示する抄録を非表示にする

The Japanese economy has suffered from the prolonged recession since the bubble economy collapsed in 1990. The Japanese government adopted the traditional fiscal policy in the mid 90's but the economy did not recover. Neoclassical economists insist that the fiscal policy has no role to stimulate the economy and the marketoriented economic reform which pursues efficiency should be carried out. In fact, reduction of government regulations and promotion of economic liberalization have become a global trend since the 1980s. In Japan, the Koizumi cabinet has carried out economic reform. On the contrary, many Keynesian economists insist that the counter-cyclical fiscal policy has an effect to stabilize the economy.
Asada
(1987) developed a Kaldorian cycle model which incorporates the budget constraint of government and showed the counter-cyclical fiscal policy is effective to stabilize the economy under certain conditions in the model. Zhang (1990) showed the existence of limit cycles by applying Hopf bifurcation theorem in the model developed by
Asada
(1987). Ninomiya (2001.a) showed the countercyclical fiscal policy is effective to stabilize the economy even if the economy is in financial instability. However, these studies did not consider the debt burden of firms. In fact, the Japanese economy has suffered from the cumulative interest-bearing debt since the bubble economy collapsed. The problem of the non-performing loan is pointed out as one of the main reasons for the prolonged recession in Japan. Ninomiya (2001.b) took the dynamic equation of debt burden into account and showed a Minskian cycle in a nonlinear dynamic model. However, he did not examine the effect of the counter-cyclical fiscal policy.
Asada
(2003) and Ninomiya (2005) took the interest-bearing debt into account and discussed the financial instability and cycle. Furthermore, Ninomiya (2005) showed the interest rate target has an effect when the cumulative interest-bearing debt makes the economy unstable. However, both
Asada
(2003) and Ninomiya (2005) did not examine the effect of the counter-cyclical fiscal policy. In this paper, we shall take both the dynamic equation of debt burden and the budget constraint of government into account in a nonlinear dynamic model and discuss a financial cycle. Furthermore, we shall examine the effect of the counter-cyclical fiscal policy when the cumulative interest-bearing debt makes the economy unstable. The main result of this paper is that the counter-cyclical fiscal policy might not have an effect to make the economy stable when the cumulative interest-bearing debt makes the economy unstable. We might be able to call this situation "debt burden trap." This also means that we could not support the market-oriented economic reform based on neoclassical economics because of the failure of traditional fiscal policy based on Keynesian economics.
抄録全体を表示

PDF形式でダウンロード (855K)
Echinostoma hortense
ASADA
の雌性生殖器と卵黄細胞・卵黄顆粒に関する研究

草浦勉

岡山医学会雑誌
1966年 78 巻 7-9 号 913-928
発行日: 1966/09/30
公開日: 2009/03/31

DOI https://doi.org/10.4044/joma1947.78.7-9_913

ジャーナルフリー

抄録を表示する抄録を非表示にする

For the purpose to study morphology and fine structures of the reproductive cells such as vitelline cells and vitelline globules as well as the structural arrangement of the female reproductive organ and the mechanism of the formation of operculum in Echinostoma hortense
Asada
, electron microscope observations were conducted, and the results of this study are briefly presented in the following.
1. The morphology of Echinostoma hortense has a basic structural arrangement as observed in general trematodes, and it is a characteristic feature of this trematode that numerous vitelline glands are distribted in the posterior half of this worm and many vitelline globules in the insemination chamber.
2. This insemintion chamber of the worm is the thickened, enalarged oviduct, and many sperms and ovums are detected in it.
3. There can be recognised the formation of egg-shell in the proximal part of uterus in the observation of live worms, and in the formation of operculum there are seen one or two vitelline cells whose sceleroma is delayed at one polar end of the longitudinal axis and at this site the egg-shell is formed.
4. In the electron microscope observations on fine structures of vitelline glands it has been possible to trace various steps from the beginning of vitelline cells to the ones that are mature and free. In those cells that are still immature there can be already detected groups of vitelline globules of high electron density.
5. Electron microscope observations of the fine structures of mature vitelline cells revealed two different kinds of vitelline globules; namely, one group was composed of vitelline globules that existed from the immature stage of the cell and the other was of those globules produced from fibroid bodies and were relatively less eleçtron dense globules.
6. There are two kinds of cells in the gland cells of Mehlis' gland of this trematode, and their morphological differences are that B-type cell located near the ootype has two kind of secretory globules while A-type cell located farther away possesses only a single but different secretory globules.
抄録全体を表示

PDF形式でダウンロード (7605K)
Sarah R.
Asada
50 Years of US Study Abroad Students: Japan as the Gateway to Asia and Beyond

太田浩

比較教育学研究
2021年 2021 巻 62 号 187-189
発行日: 2021年
公開日: 2023/07/19

DOI https://doi.org/10.5998/jces.2021.62_187

ジャーナルフリー

PDF形式でダウンロード (1757K)
ANISOTROPIC PLATE THICKENING MODEL

Yuzo ISHIKAWA

Journal of Physics of the Earth
1984年 32 巻 3 号 219-228
発行日: 1984年
公開日: 2009/04/30

DOI https://doi.org/10.4294/jpe1952.32.219

ジャーナルフリー

抄録を表示する抄録を非表示にする

A model which combines the plate thickening model and the preferred orientation olivine model is proposed to interpret P-wave velocity azimuthal anisotropy in the lithosphere. Two layers of anisotropy are used to interpret the low velocity zone structure introduced by
Asada
and Shimamura in the Northwestern Pacific as a result of the azimuthal difference of the maximum P-wave velocity axes. We also suggested that the rate of anisotropy changes with depth.
抄録全体を表示

PDF形式でダウンロード (971K)
Calcium Regulation in Squid Mantle and Scallop Adductor Muscles

Kunihiko KONNO, Ken-ichi ARAI, Mikiharu YOSHIDA, Shizuo WATANABE

The Journal of Biochemistry
1981年 89 巻 2 号 581-589
発行日: 1981年
公開日: 2008/11/18

ジャーナルフリー

抄録を表示する抄録を非表示にする

Calcium binding to the regulatory light chain was studied by an equilibrium dialysis method, and it was found that calcium binding to the regulatory light chain in an isolated form was qualitatively different from that in a bound form, i.e., in myosin. This finding can acount for our previous observation (1979) that the calcium or strontium concentration required for inducing difference spectra in the regulatory light chain (in an isolated form) was higher than that required for activating ATPase or for superprecipitation of actomyosin (in a bound form).
Most of the findings obtained by
Asada
et al. (1979) and Ashiba et al. (1980) for clam foot myosin were confirmed with squid mantle myosin and scallop adductor myosin. Therefore, the following properties are probably not confined to clam foot myosin but are common to myosins from molluscan muscles. (1) The Mg-ATPase activity of myosin alone was sensitive to calcium. (2) Removal of the regulatory light chain resulted in a reversible loss of superprecipitation ability. (3) As the ATP concentration increased, the ATPase activity of actomyosin changed in a biphasic manner, whereas that of myosin alone changed in a monophasic manner.
Two of our observations appear to favor the suggestion of
Asada
et al. and Ashiba et al. that the primary action of calcium is to activate myosin-ATPase rather than to induce actin-myosin bindings. (1) Desensitized myosin (free from the regulatory light chain) behave exactly like untreated myosin in the presence of calcium. For example, as the ATP concentration increased, the ATPase activity of myosin alone and that of actomyosin changed qualitatively and quantitatively in the same way as those of untreated myosin and acto-untreated myosin in the presence of calcium. (2) At KCl concentrations between 0.2M and 0.4M, actin-activation of myosin (in the presence of calcium) was absent whereas calcium sensitivity of myosin-ATPase was still detectable.
抄録全体を表示

PDF形式でダウンロード (597K)
注意に基づくDBNを用いた状況依存予測器の学習

*藤田徹也, 荻野正樹, 福家佐和, 浅田稔

自動制御連合講演会講演論文集
2009年 52 巻 C2-6
発行日: 2009年
公開日: 2010/01/22

DOI https://doi.org/10.11511/jacc.52.0.88.0

会議録・要旨集フリー

抄録を表示する抄録を非表示にする

本研究では対象物体の形状や周辺環境に応じて予測を変化させる，状況依存予測器を提案する．また，ロボットが自律的に学習を進めるために，対象物体の探索と注意の維持，解放を規定する注意モデルを提案する．
抄録全体を表示

PDF形式でダウンロード (1916K)
故浅田隆夫先生を追悼する

日本体育・スポーツ哲学会

体育・スポーツ哲学研究
2019年 41 巻 1 号 1-3
発行日: 2019年
公開日: 2019/09/20

DOI https://doi.org/10.9772/jpspe.41.1_1

ジャーナルフリー

PDF形式でダウンロード (662K)
圧力容器の高温設計に対する材料強度基準値の調査, 研究 (第1報)

ETD委員会の活動概要とアンケート調査結果

田原隆康, 峯昌紀, 鵜戸口英善

圧力技術
1995年 33 巻 3 号 163-169
発行日: 1995/05/25
公開日: 2010/08/05

DOI https://doi.org/10.11181/hpi1972.33.163

ジャーナルフリー

抄録を表示する抄録を非表示にする

The Elevated Temperature Design Committee, chaired by Prof. Yasuhide
Asada
, was started in June, 1992 to establish Simplified Analytical Procedures for Design and Strucutural Serviceability Assessment for Non-nuclear Pressure Vessels based on high temperature design method of fast breeder reactor in Japan, “Monjyu”, and also to exchange information useful for both PVRC-ETD and JRVRC-ETD (J-ETD). J-ETD consists of three sub-committes, Analytical Method, Codes and Standards and Mechanical Properies, and 24 members.
This interim report summarizes studies of mechanical properties for elevated temperature design of pressure vessels by Sub-committee on Mechanical Properties.
抄録全体を表示

PDF形式でダウンロード (741K)
2A1-E24 顔特徴量の発見と選好性の獲得 : 応用行動分析による自閉症児の学習モデル(認知ロボティクス)

渡辺絢子, 荻野正樹, 浅田稔

ロボティクス・メカトロニクス講演会講演概要集
2008年 2008 巻 2A1-E24
発行日: 2008/06/06
公開日: 2017/06/19

DOI https://doi.org/10.1299/jsmermd.2008._2A1-E24_1

会議録・要旨集フリー

抄録を表示する抄録を非表示にする

This paper proposes a system that models the interaction in Applied Behavior Analysis(ABA). ABA is a education for Autism children to acquire the ability of communication, and is a kind of reinforcement learning. In the education, when an autism child looks at caregiver's face, then he/she can get a reward from the caregiver. By modeling the interaction and implementing the model to a robot, robot acuires the ability of looking at human face without initial knowledge about face.
抄録全体を表示

PDF形式でダウンロード (850K)
1A2-L10 視覚観測困難な自己の顔の身体像におけるパーツ検出モデルの提案(認知ロボティクス)

福家佐和, 荻野正樹, 浅田稔

ロボティクス・メカトロニクス講演会講演概要集
2007年 2007 巻 1A2-L10
発行日: 2007/05/11
公開日: 2017/06/19

DOI https://doi.org/10.1299/jsmermd.2007._1A2-L10_1

会議録・要旨集フリー

抄録を表示する抄録を非表示にする

This paper proposes a learning model that enables a robot to acquire a body image for parts of its body that are invisible to itself. A robot estimates the invisible hand positions using the Jacobian between the displacement of the joint angles and the optical flow of the hand. When the hand touhches one of the invisible tactile sensor units on the face, the robot associates this sensor unit with the estimated hand position. In addition, we propose a model to discriminate the tactile sensor units each of which is corresponded to each facial part based on the discontinuity of sensor value. Then finally, the robot becomes able to associate them with the feature points of parts in the image of other's face.
抄録全体を表示

PDF形式でダウンロード (727K)
Precipitation Behavior of AlN in Cold-Worked High Purity Fe-Al-N Alloy

Rikuo OGAWA, Toshiro FUKUTSUKA, Yoshiro YAGI

Transactions of the Iron and Steel Institute of Japan
1972年 12 巻 4 号 291-297
発行日: 1972年
公開日: 2020/01/30

DOI https://doi.org/10.2355/isijinternational1966.12.291

ジャーナルフリー

PDF形式でダウンロード (3876K)
Precipitation of AlN in High Purity Fe-Al-N Alloy

Yoshiro YAGI, Toshiro FUKUTSUKA, Rikuo OGAWA

Transactions of the Iron and Steel Institute of Japan
1972年 12 巻 3 号 233-240
発行日: 1972年
公開日: 2020/01/30

DOI https://doi.org/10.2355/isijinternational1966.12.233

ジャーナルフリー

PDF形式でダウンロード (4296K)
2A1-E23 視覚的注意に基づく手先の感覚統合(認知ロボティクス)

疋田麻衣, 福家佐和, 荻野正樹, 浅田稔

ロボティクス・メカトロニクス講演会講演概要集
2008年 2008 巻 2A1-E23
発行日: 2008/06/06
公開日: 2017/06/19

DOI https://doi.org/10.1299/jsmermd.2008._2A1-E23_1

会議録・要旨集フリー

抄録を表示する抄録を非表示にする

Body representation is one of the most fundamental issues for physical agents (humans, primates, and robots) to perform various kinds of tasks. This paper proposes a method that constructs cross-modal body representation from vision, touch, and proprioception. Tactile sensation, when the robot touches something, triggers the construction process of the visual receptive field for body parts that can be found by visual attention based on saliency map. Simultaneously, proprioceptive information is associated with this visual receptive field to realize the cross-modal body representation. The computer simulation result comparable to the activities of parietal neurons found in monkey is given and future issues are discussed.
抄録全体を表示

PDF形式でダウンロード (1107K)

J-STAGEへの登録はこちら（無料）