2015 Volume 12 Issue 12 Pages 20150380
This paper has presented a non-contact vibration sensor based on fiber Bragg grating (FBG) sensing, and applied to measure vibration of turbine rotor dynamic balance platform. The principle of the sensor has been introduced; it’s based on magnetic coupling principle and the FBG sensing to obtain the vibration. The sensors calibration experiments show that: sensitivity of 1st sensor in range of 3.00–3.80 mm is −449.83 pm/mm, linearity is 5.19%; sensitivity of 2nd sensor in range of 4.00–5.00 mm is −430.95 pm/mm, linearity is 3.31%. In addition, turbine rotor dynamic vibration detection system based on eddy current displacement sensor and non-contact FBG vibration sensor have set; and contrast analysis of experiments data shows that: the vibration signal analysis of non-contact FBG vibration sensor is basically the same as the result of eddy current displacement sensor. It verified that the sensor can be used for non-contact measurement of turbine rotor dynamic balance vibration.