2008 年 25 巻 1 号 p. 9-19
The study used the particle swarm optimization to maximize the specific cooling capacity (SCC) of a single-stage adsorption chiller, as well as to maximize the coefficient of performance (COP) at part load conditions of the chiller. The cycle time, which consists of adsorption/desorption time and pre-heating/ pre-cooling time, was chosen as a design parameter. The simulation results of a mathematical model showed a good agreement with experimental results on SCC and COP.
It was shown that the SCC could be improved by the optimum cycle time as much as by 30% compared with that by the fixed cycle time. It was also presented that the part load COP would be significantly increased by the cycle time optimization at part load conditions.