Thin films of Bi
2Te
3 were grown on mica (001) substrates by hot wall epitaxy (HWE). Reflection high energy electron diffraction (RHEED) patterns of deposited films indicated that the film condition depends on the substrate temperature in the film growth process, and the epitaxial Bi
2Te
3 single crystal films were grown with two-steps substrate temperature control. The X-ray diffraction (XRD) pattern indicated that the Bi
2Te
3(0001) single crystal film was grown on the mica substrate with
c-axis oriented perpendicular to the substrate plane. The microstructure of the Bi
2Te
3 film was examined by scanning electron microscope (SEM), and the layered structure was observed. The deviation from stoichiometric composition causes the change in the conduction character, the film with an excess of tellurium is
n-type and with an excess of bismuth is
p-type. Hall concentrations for
n- and p-type films were 2.4×10
25/m
3 and 3.1×10
25/m
3 respectively: The Seebeck coefficient α and the power factor α2/ρ for
n-type film were -237μV/K and 2.6×10
-3W/(K
2m) at 293K, and those for
p-type, 141μV/K and 0.55×10
-3W/(K
2m).
View full abstract