A full account is given of the chemical behavior observed for , -dialkyladeninium salts (16). On treatment with boiling N aqueous NaOH for 60min, 16a, , d, (X=I), 16 (X=Br), and 16 (X=ClO₄) rearranged to isomeric , -dialkyladenines (21a-) in 50-% yields. Treatment of the salts with .5N aqueous Na₂CO₃ at room temperature for 30-90min or with Amberlite CG-400 (OH^-) in H₂O at room temperature gave the ring-opened derivatives a- (in the trans-formamide form) in 56-83% yields, and rate constants for the ring-opening reactions of 16a, , d-g (X=ClO₄) and 16 (X=Br) leading to a-g were determined in H₂O at pH . and ionic strength .50 at 25°. Cyclization of a with NaH in AcNMe₂ at room temperature or with boiling N aqueous NaOH produced 21a in % or 72% yield, respectively.In solution, the trans-formamides seemed to transform slowly into the cis-formamides 23, attaining equilibria. The existence of such an equilibrium in D₂O or Me₂SO- at 25° or in H₂O at pH . and ionic strength .50 at 25° was kinetically confirmed in the case of a, and the mechanism of the rearrangement of 16 to 21 through is discussed on the basis of the above kinetic results and Deslongchamps' theory of stereoelectronic control. On treatment with NaBH₄ in MeOH at room temperature, 16a (X=I) furnished the , 8-dihydro derivative 28 (% yield), which slowly decomposed in H₂O at 60° to give a in 49% yield.The , -dialkyladeninium salts (16) were found to be obtainable from N'-alkoxy--alkyl-5-formamidoimidazole-4-carboxamidines () through an alternative synthetic route : Alkylations of with alkyl halides in HCONMe₂ in the absence of base, followed by hydrogenolysis of the N'-alkoxy group and cyclizatio (or vice versa) produced 16 in acceptable yields. In order to interpret the proton nuclear magnetic resonance spectrum of a, the 2-deuterated species 26 was also synthesized from 24 via 25 and 27.

抄録全体を表示

Two new partially saturated tricyclic ring systems, , a, , 8, , 10, 10a, 11-octahydro-11-oxodibenz [, ] oxepins (3a and 3), and -thiepins (4a and 4) were synthesized. Compounds 4a and 4 were desulfurized to give a pair of isomeric 2-methylbenzoylcyclohexanes (10a and 10). Deuterated 4a and 4 (11a and 11) were prepared starting from butadiene- (12). The stereochemical features of 3a (trans), 3 (cis), 4a (trans) and 4 (cis) are compared with those of 10a, 10, 11a and 11 on the basis of proton nuclear magnetic resonance data.

抄録全体を表示

11-Amino-, a, , 8, , 10, 10a, 11-octahydrodibebenzo[, ]thiepines (a-d) and -oxepines (a-d) were synthesized by the Leuckart reaction of , a, , 8, , 10, 10a, 11-octahydro-11-oxodibenzo[, ]thiepines (a, )and -oxepines (2a, ) followed by hydrolysis of the reaction products 4a-d and 5a-d, respectively. The four diastereomers, cis(a-H, 10a-H)-cis(10a-H, 11-H) a and a, cis(a-H, 10a-H)-trans(10a-H, 11-H) and , trans(a-H, 10a-H)-trans(10a-H, 11a-H) and , and trans(a-H, 10a-H)-cis(10a-H, 11-H) d and d, were isolated and their configurations and conformations were elucidated by chemical methods together with

1H

-nuclear magnetic resonance spectroscopic and X-ray crystallographic analyses.

抄録全体を表示

One method currently being considered for the disposal of high level radio-active waste is burial in the seabed. When a hot object is buried in soil, the temperature of the soil adjacent to the object is raised and there is transient heat flow away from the object. The rise in the temperature of the soil causes excess pore pressures to be generated and transient pore water diffusion also takes place. A finite element formulation of the coupled heat flow and consolidation problem is presented. The computer implementation of this formulation is found to compare favourably with analytical solutions based on the same physical principles.

抄録全体を表示

Using the so-called pseudo-static method, a stability analysis was made for the mountain slide that took place at Mitake-iriya village at the time of the Izu-Ohshima-Kinkai earthquake of January 14, 1978. Undisturbed samples of volcanic clay were obtained in blocks from the exposed surface of the deposit identified to have been the sliding surface. The partially saturated clay samples were tested under consolidated undrained conditions using the triaxial test equipment. Dynamic axial stresses with irregular time histories were applied to the specimens in combination with statically sustained axial stresses to determine the soil strength under the conditions simulating in-situ states of stress during the earthquake. The results of the tests were expressed in terms of the Mohr-Coulomb type failure criterion which showed that, while the angle of internal friction remained almost unchanged, the cohesion component in irregular loading increased above values obtained in the static loading. Using the strength parameters thus determined, a pseudo-static analysis was made to check the stability of the soil masses that had actually slid during the 1978 earthquake. The maximum horizontal acceleration required to cause the slide was computed. The computed accelerations were shown to cover a range between 400 and 500 gals which is consistent with the range estimated by other investigators on the basis of overturning of tombstones in the vicinity of the slide area.

抄録全体を表示

When a mudflow moves down a slope, the gravity induced shear stress, τ, is opposed by the combined effect of the undrained shear strength, c_u, of the mud, and its viscosity, η, which is associated with the velocity gradient in the mudflow, dv/dy. In equation form this can be expressed as : τ= c_u+η(dv/dy). The resistance provided by the mud involves the contribution of both c_u and η. For an understanding of the mobilization mechanics of mudflows, one needs then these two parameters. This study describes two methods that can be used to determine these parameters. The c_u of the muds is measured using a cylinder-strength meter devise. The technique associated with this devise consists in lowering a cylinder of known dimension and weight into a mud sample, measuring the depth of penetration of the cylinder into the mud, and calculating the strength, c_u, of the mud required to support the solid cylinder at that depth. The c_u of the mud is calculated using Sokolovski's theory designed to calculate the indentation pressures developed by a Tresca plastic when a cylinder penetrates it. The determination of the viscosity, η, of the mud is obtained from either the velocity measurements of the free surface of the mudflow, or from the difference between the velocity of the free surface of the mudflow and its velocity at the interface between the mudflow and the surface on which it moves. The viscosity η is obtained from a relationship that relates these velocities with η.

抄録全体を表示

From the fronds of Polystichum tripteron (KUNZE) P_R. a new norcarotenoid glycoside was isolated and shown to be (R, , R)--hydroxy-megastigma-4, -dien-3-one--O-β-D-glucoside. The fronds of Dennstaedtia wilfordii (MOORE) CHRIST. contain the same glucoside.

抄録全体を表示

Using two direct introduction methods, DNA synthesis or cell proliferation activities of three purified proteins from . coli, namely, human papillomavirus (HPV) proteins of type 16, a mutant type 16 (24 -G) (transformation defective) and type , were measured in mouse fibroblast, 127 cells. By a microinjection method, the order of the cell mitotic indexes for the three proteins as determined by 5-bromo-2'-deoxy-uridine (BrdU) staining was type 16, and 16 (24 -G). By the osmotic shock method, the ³H-TdR incorporation and coloration by (3-carboxymethoxy phenyl)-2-(4-sulfophenyl)-2H-tetolazorium (MTS) for the three proteins correlated with the pRb binding and focus forming activities previously reported (hunger et al. 1991). These results indicate that the simple osmotic shock method for direct protein introduction may be generally useful for transformation assays of oncoproteins.

抄録全体を表示

Natural sedimentary clays exhibit ageing effects on their behaviour when subjected to both consolidation and shearing. Attempts to characterising the in-situ 'structure'of soft marine clays have been made in case studies performed in Ariake (Japan) and in Bangkok (Thailand), each showing a typical profile of aged clay-structure with depth reflecting its site-specific geological consolidation history. In each site, profiles of Atterberg limits, natural water content, overconsolidation ratio (OCR), quasi-elastic shear modulus G_max and the undrained shear strength c_u with depth were attained from various laboratory tests, together with the a comparable profile of quasi-elastic shear modulus from insitu seismic survey G_f. Quantitative assessment of the aged clay-structure was made by using two different measures, metastability index MI (G) and the soil constant reflecting structure S (Jamiolkowski et al., 1994). The profiles of MI (G) and the S-value with depth were both determined based on the corresponding G_max behaviour of the reconstituted sample. "Disturbance"of laboratory samples retrieved by using two different samplers (i.., Laval and Japanese thin-walled samplers) with two different sampling techniques (i.., pre-boring and displacement methods) was discussed. A new approach to estimate c_u"in the ground", termed by the authors the MILK (Metastability Index coupled with Laboratory K_o test) method, is proposed. A trial of the MILK-method is demonstrated in soft Bangkok clay, the texture of which is similar to "soft cheese".

抄録全体を表示

We screened the differentiation-inducing activities of 39 mushroom extracts from Akita prefecture, Japan, on the mouse osteoblastic cell line, MC3T3-. Sixteen phosphate buffered saline (PBS), 8 boiled PBS, 14 ethanol and 12 methanol extracts induced alkaline phosphatase (ALP) activities, an indicator of MC3T3- cell differentiation. The enzyme activities were markedly induced by extracts of Tricholoma auratum, and we isolated the active compound from methanol extracts of this mushroom. Physical data for the isolated active compound were identical to those for (,24R)-ergosta-,-diene-3β,5α,-triol (). induced ALP activities of MC3T3- cells and promoted cell proliferation. To investigate the relationships between the chemical structure and differentiation-inducing activity of the compound, ALP-inducing activities of MC3T3- cells by , ergosterol (2), ergocalciferol (3), cholesta-3β,5α,-triol (4), -dehydrocholesterol (5) and cholecalciferol () were tested. The enzyme activities of MC3T3- cells were increased 3.-fold by 10 μM and 2.4-fold by 10 μM 4. However, 2, 3, 5 and did not induce MC3T3- cell ALP activity at .—10 μM. These results suggested that the OH groups at -5 and/or - of and 4 played an important role in their differentiation-inducing activities on MC3T3- cells. Furthermore, suppressed induction of MC3T3- cell apoptosis by serum starvation.

抄録全体を表示

The advantages and disadvantages of using a back analysis of slope failures to evaluate soil shear strength are discussed. A methodology is presented herein that allows the implied level of reliability associated with soil shear strength parameters back calculated from slope failures to be estimated. A reliability approach is also used to estimate the probability of failure for a given limit equilibrium slope stability method, design factor of safety, and combination of back calculated Mohr-Coulomb shear strength parameters, ' and φ'. The methodology is illustrated using 39 landslides in the Orinda Formation in the San Francisco Bay area. The impact of additional case histories in the same geologic setting, i.., a larger data set, on the required design factor of safety for a given probability of failure is also investigated.

抄録全体を表示

(,)-2,3-エポキシ-3,,11,11-テトラメチルシクロウンデカ-,-ジエン(2)をフムレン((2,,)-3,,11,11-テトラメチルシクロウンデカ-2,,-トリエン)より合成する既知の合成法は実際に牧率が低く合成的に問題がある.さらに,2の合成はその反応性や物性の研究のために簡単に高牧率で行われることが望まれる.今回,2の新たな合成法と簡便な精製法を見いだし,2を高牧率でから合成することができたので報告する.のジエポキシ化,続く再結晶により得られたジエポキシド(8)は二価のチタンにより還元されて,(273%)と8(25%)と少量の3を含む2を主生成物(42.%)として与えた.と3は原料として再利用できる.2の精製はと同様硝酸銀(AgNO₃)錯体の結晶で行い,純粋な2はから通算牧率32.%で得られた.2の既知方法による合成は4段階の反応と数回のカラム分離及び10%AgNO₃含浸シリカゲルカラム分離を必要とし牧率が極端に低い.今回,新しい2の合成法は2段階の反応で回のカラム分離と再結晶により高い通算牧率を示す.

抄録全体を表示

Based on the assumption that an inward- or outward-directed flow perpendicular to a slope exists, this paper describes an experiment and test results. The results are compared with both traditional continuum and single-grain theories presented for the relationship between hydraulic gradient and slope angle. For the case of outward flow, the continuum theory governs the failure mechanism of the Shirasu talus deposit. The single-grain theory controls the failure process for inward flow.

抄録全体を表示

[] The purpose of this reserch is to make clear what type of design can give good effects to win the high readership score. At the begining I had to know what factors decide the readership score, and how to change the quality of the desing into numerical value. I have used the method of multi-dimentional analysis with the help of a computer, and got the estimation formula, with kinds of factors, as follows ; A^^〜=++D+K+aE+bF+cG. A^^〜=estimated values of the readership score. ) , , D, K : these four factors are given as category values (so we call them); each factor is classified into several categories. =week day, classified into categories. =pages of a newspaper, which are characterized by the kinds of articles, news, and the other reading matters, classified into categories. D=kinds of goods and trades of the advertizement, classified into 14 catedories. K=constants, given to each 13 surveys. 2) , , G : these factors are given as numerical values. G=area of advertizement, measured by the unit of column in the whole page length, being classified into kinds of area (2.5, 3.5, 5, , 10, 15) and 15 column means a whole page, about 2,000cm^2. , are the marks obtained in the design of advertizements. =sum of the marks obtained in each design element on the advertizement. =the marks obtained on the whole effect of the design. 3) a, , : coefficients Using the above formula with the category values and the coefficients, we can obtain the naked design effect from the actual value A of readership score: aE+bF=A-(++D+K+cG). In this research, I used ,829 data of readership score from 1960 to 1968, being obtained by 13 survevs, spring and autumn twice a year. The sample of size each survey was 3,541, 2,251, or 200 in the other 11 surveys. Multiple correlation coefficient between the estimated value A^^〜 and the actual value A is .951. The table 2^* shows the contribution indexes of each factor by 3 kinds of expression-() Range : the absolute difference between the maximum and the minimum category values, (2) Standard deviations of the category values, (3) Partial correlation coefficient : the relationship between the actual values A and each factors. *see the table 2 in the thesis in Japanese. [2] The important point was in the determination of the values of , . is the sum of the marks obtained in each design element, classified into four kinds : =_+_2+_3+_4. design elements [table] _, _2, _3, _4, these values have the 5 grades, as , , 2, 3, 4 and is given to the design that has no attractive effect or no applicable element. And obtain the marks of to grades as the sum of them. The values of have also 5 grades, to 4. The principles to determine the values of , are as follows : a) The marks obtained of , must be the relative values among the each survey, and at the same time, they must have constancy within the same survey-the same elements of design must win the same marks obtained. ) They must be determined as to win the highest multiple correlation coefficient, when they are put into the estimation formula. ) They must be reasonable. In order to justify them, we must carry many researches on the actual condition. The frequency of accurence of each grade of , values, as the table 5-4, and 5-5 in the thesis in Japanese.

抄録全体を表示

Circuit techniques to enhance the linearity of input-voltage-to-current (V/I) conversion and to increase the output impedance of a current source by compensating for the low intrinsic gain of a transistor were introduced to realize a high-frequency operational transconductance amplifier (OTA) for a low supply voltage using sub-100-nm CMOS processes. Applying these techniques, a MOS th-order Gm- linear-phase low-pass filter (LPF) was realized using a 65nm CMOS process. A simplified biquad LPF that can serve as a component of a th-order LPF was newly developed by replacing OTAs with resistors. As a result, the -3dB frequency bandwidth, group delay ripple, 3rd-order distortion, and 3rd-order input intercept point (IIP3) were 200MHz, 2.2%, ≤ -55dB with a 100MHz input, and +10.3dBm, respectively, all with a ±.Vp-p input signal at each input terminal in the pseudodifferential configuration. The LPF including an output buffer dissipated 60mW in the case of a .2V supply. Wide spurious-free dynamic range (SFDR) characteristics were confirmed up to high frequencies.

抄録全体を表示