防蝕技術
Online ISSN : 1884-1155
Print ISSN : 0010-9355
ISSN-L : 0010-9355
11 巻, 5 号
選択された号の論文の7件中1~7を表示しています
  • 西 義〓
    1962 年 11 巻 5 号 p. 193-197
    発行日: 1962/05/15
    公開日: 2009/11/25
    ジャーナル フリー
    Scales formed on Ni-Cr-base alloys and some practical heat-resisting alloys were investigated by X-ray diffraction method. The following results were obtained. (1) Alloying element, molybdenum, titanium and tungsten formed respectively NiOMoO3, NiOTiO2 and NiOWO3 in the scales of Ni-Cr-base alloys above 1, 000°C. (2) Cobalt and aluminum addition hindered the formation of these double oxides. (3) On Ni-Cr-base alloys containing titanium, formation of TiO2 was observed in higher content of titanium, and at higher temperature, (4) On Ni-Cr-base alloys containing niobium, CrNbO4 was formed above 1, 000°C, and NiONb2O5 was not formed. On Co-base alloys containing niobium, CrNbO4 was also formed.
  • 福井 三郎, 川野 進, 永江 康雄
    1962 年 11 巻 5 号 p. 198-201
    発行日: 1962/05/15
    公開日: 2009/11/25
    ジャーナル フリー
    During the acid cleaning of various equipments, one of the troubles frequently encountered is acid attack on construction materials. Therefore, care should be taken to protect the equipment from acid attack during acid cleaning.
    Although the acid attack on steel has been studied for many years, there seems to be very little study concerning the acid attack on copper alloys, because the corrosion rates of copper alloys are considered to be comparatively low in the non-oxidizing acid solutions such as hydrochloric acid.
    However, the acid solution containing oxidizing agents such as oxygen, ferric or cupric ion, etc. may cause attack.
    In this study, we have investigated the effects of acid concentration, temperature, gas atmosphere and oxidizing ions such as ferric or cupric ion on the corrosion of copper alloys in hydrochloric acid solutions.
    As a result, it has been found that in the presence of oxidizing ions, the inhibition effect of inhibitors is markedly decreased, and the corrosion rates of copper alloys are greatly accelerated in the inhibited hydrochloric acid solution.
    The tendency is more remarkable when air is bubbled through the solution.
    On the hand, in the absence of oxidizing ions, the corrosion of copper alloys in hydrochloric acid can be prevented by inhibitors even when air is bubbled through the solution.
  • 福井 三郎, 川野 進, 小野 正男
    1962 年 11 巻 5 号 p. 202-208
    発行日: 1962/05/15
    公開日: 2009/11/25
    ジャーナル フリー
    In the previous report, it has been revealed that the acid attack on copper alloys during acid cleaning is mainly accelerated by oxidizing ions such as ferric or cupric ion in the inhibited hydrochloric acid solutions.
    In the case of coupling dissimilar metals, there is the possibility of attack caused by galvanic action. When coupled, the anodic metal will corrode faster and afford some protection to the other.
    In this study, we have investigated the effects of inhibitor, gas atmosphere and oxidizing ions such as ferric or cupric ion on the corrosion of steel-copper alloy couple in hydrochloric acid solution.
    The results obtained are as follows.
    (1) The greater the corrodibility of hydrochloric acid is, the higher the effect of galvanic action on the corrosion of steel-copper alloy couple is.
    In the noninhibited hydrochloric acid solution containing oxidizing ions, the corrosion rate of steel coupled to copper alloy is greater than that of uncoupled steel and much greater when air is bubbled through the solution.
    (2) But, in the inhibited hydrochloric acid solution, the effect of galvanic action is decreased, and the corrosion rates of coupled steel and copper alloy, whether in the presence of oxidizing ions or not, are approximately the same as those for uncoupled steel and copper alloy.
    (3) Also, it has been verified that the cathodic protection is very effective for prevention of acid attack on such galvanic couples as steel-stainless steel system and steel-copper alloy system, in the same way as it is effective in the case uncoupled steel.
  • 腐食速度と流速の関係および工業的利用法
    山本 大輔
    1962 年 11 巻 5 号 p. 208-211
    発行日: 1962/05/15
    公開日: 2009/11/25
    ジャーナル フリー
    食塩100ppmを含む西宮市水にインヒビターとして, (1) 亜鉛を含むガラス状ポリ燐酸塩, (2) Zn2+を併用したポリ燐酸ソーダ, (3) ポリ燐酸ソーダを単独で添加して流水による腐食試験を行ない, また(1)のもの (5~9メッシュ) を使用して溶出量を測定した結果を要約すると次のとおりである。
    (a) ポリ燐酸ソーダ単独使用の場合, その濃度が高い (水中のCa2+に対応する以上) ときはZnを液中に共存させた場合に比較して満足な結果が得られない。
    (b) 亜鉛を含むガラス状ポリ燐酸塩とZn2+を併用したポリ燐酸ソーダは同傾向の抑制作用を持ち, いずれも無添加の場合とは逆に流速の増加にしたがって腐食速度は減少する。
    (c) 亜鉛を含むガラス状ポリ燐酸塩をタンクに充填して通水すれば, インヒビターの粒度と使用量を適当に定めることによって目的の処理水を得ることができる。
  • 学振第97委員会ステンレス鋼分科会
    1962 年 11 巻 5 号 p. 212-218
    発行日: 1962/05/15
    公開日: 2009/11/25
    ジャーナル フリー
  • D. Bienstock, J. H. Field, 荒牧 国次
    1962 年 11 巻 5 号 p. 218-221
    発行日: 1962/05/15
    公開日: 2009/11/25
    ジャーナル フリー
  • 伊藤 伍郎
    1962 年 11 巻 5 号 p. 222-223
    発行日: 1962/05/15
    公開日: 2009/11/25
    ジャーナル フリー
feedback
Top