-
Shinichi Tamura
2016 Volume 2 Issue 2 Pages
185
Published: 2016
Released on J-STAGE: April 09, 2018
JOURNAL
OPEN ACCESS
Thanks to the efforts of all the members of the GBS Society of the General Association and the people of the GPI Standards Committee, the GPI Standards Committee has been in full for two years, and the GPI Journal has also been able to publish the fourth issue safely, we would like to take this opportunity to express sincere gratitude.
View full abstract
-
Yoshinori Nishino
2016 Volume 2 Issue 2 Pages
186
Published: 2016
Released on J-STAGE: April 09, 2018
JOURNAL
OPEN ACCESS
The global management society which is the parent society of our society gave an accomplishment award to Professor Toshio Nishida who has been leading the Japanese academic community for over half a century. Also, in the next fiscal year and later, we decided to establish Nishida Prize with Professor Nishida's name.
View full abstract
-
Yoshinori Nishino, Allen S. Chiu, Shinichi Tamura, Masaki Nishino, Tai ...
2016 Volume 2 Issue 2 Pages
187-192
Published: 2016
Released on J-STAGE: April 06, 2018
JOURNAL
OPEN ACCESS
Generally from the course of corrosion-resistant FRP pipe has been developed as an alternative material of the corrosive metal pipe, combination with existing metal flange is required. Basically, by mating surfaces unified, common commercialization can be achieved. So, after standards of PCD/ hole diameter of the bolt, a flange inner and outer diameters are defined, from the specifications of unevenness of the flange contact surface, waterproof function, applied bolts/number, and the allowable pressure, product design is carried out.
View full abstract
-
Yoshinori Nishino, Allen S. Chiu, Shinichi Tamura, Masaki Nishino, Tai ...
2016 Volume 2 Issue 2 Pages
193-197
Published: 2016
Released on J-STAGE: April 06, 2018
JOURNAL
OPEN ACCESS
In the first report, the design of optimal FRP flange was reported. In this second report, outcomes of optimum ASA150/300 FRP flange design development to apply compression molding method for under 400mm, and centrifugal molding method for more 400mm up to 3.5m are reported. Detailed research results are shown such that the cost is about half of the conventional product and the quality is about 2 times.
View full abstract
-
Yoshinori Nishino, Allen S. Chiu, Shinichi Tamura, Masaki Nishino, Tai ...
2016 Volume 2 Issue 2 Pages
198-203
Published: 2016
Released on J-STAGE: April 06, 2018
JOURNAL
OPEN ACCESS
In oil and gas production, the quality assurance of product is very important. The product of the quality assurance program consists of a performance guarantee of the design of the product and the performance test and quality assurance traceability. This study report the research results of the performance guarantee design conditions for reasonable products.
View full abstract
-
Yoshinori Nishino, Allen S. Chiu, Shinichi Tamura, Masaki Nishino, Tai ...
2016 Volume 2 Issue 2 Pages
204-208
Published: 2016
Released on J-STAGE: April 06, 2018
JOURNAL
OPEN ACCESS
In oil and gas production, the quality assurance of product is very important. The product of the quality assurance program consists of a performance guarantee of the design of the product and the performance test and quality assurance traceability. This study report the research results of the performance guarantee design conditions for reasonable products.
View full abstract
-
(Machine translation)
Yoshinori Nishino, Allen S. Chiu, Shinichi Tamura, Masaki Nishino, Tai ...
2016 Volume 2 Issue 2 Pages
209-214
Published: 2016
Released on J-STAGE: April 06, 2018
JOURNAL
OPEN ACCESS
Quality assurance for handling dangerous goods is an extremely important product of oil country tubular goods. The product quality assurance program consists of product performance guarantee design, performance confirmation test, quality assurance traceability. In this research, we report the results of the research on the test method and evaluation for rational product performance guarantee.
View full abstract
-
Taiga Tatsumi, ZhenHong Wang, Hiroyuki Doi, Shinichi Tamura, Yoshinori ...
2016 Volume 2 Issue 2 Pages
215-218
Published: 2016
Released on J-STAGE: April 13, 2018
JOURNAL
OPEN ACCESS
For the production of E-Glass for SMC, selection of sizing agents is extremely important. In this report, we introduce the production process of glass fiber for SMC and examined the cause of fluff that occurs in the process of manufacturing roving which becomes product. One of the causes was turned out to be heterogeneity of the sizing agent. Fluff generation mechanism is as follows; since the sizing agent for bundling does not spread uniformly, a blank portion is formed in the fiber, the fiber is bent at an acute angle, and the fiber filament is cut and fluff is generated.
View full abstract
-
(Machine translation)
Taiga Tatsumi, ZhenHong Wang, Hiroyuki Doi, Shinichi Tamura, Yoshinori ...
2016 Volume 2 Issue 2 Pages
219-222
Published: 2016
Released on J-STAGE: April 13, 2018
JOURNAL
OPEN ACCESS
For the production of E-Glass for SMC, selection of sizing agents is extremely important. In this report, we introduce the production process of glass fiber for SMC and examined the cause of fluff that occurs in the process of manufacturing roving which becomes product. One of the causes was turned out to be heterogeneity of the sizing agent. Fluff generation mechanism is as follows; since the sizing agent for bundling does not spread uniformly, a blank portion is formed in the fiber, the fiber is bent at an acute angle, and the fiber filament is cut and fluff is generated.
View full abstract
-
Taiga Tatsumi, ZhenHong Wang, Hiroyuki Doi, Shinichi Tamura, Yoshinori ...
2016 Volume 2 Issue 2 Pages
223-226
Published: 2016
Released on J-STAGE: April 13, 2018
JOURNAL
OPEN ACCESS
In order to produce a mat, it is necessary to obtain impregnating property, uniformity, corrosion resistance and strength necessary for handling. In this paper, we evaluate the standard physical properties of chopped strand mat, mat strength evaluation and calculation method, bending stiffness test method, evaluation method of uniform dispersion, impregnation test method, product quality evaluation method, boiling water immersion test method, long-term deterioration test method and strength test method will be described.
View full abstract
-
(Machine translation)
Taiga Tatsumi, ZhenHong Wang, Hiroyuki Doi, Shinichi Tamura, Yoshinori ...
2016 Volume 2 Issue 2 Pages
227-230
Published: 2016
Released on J-STAGE: April 13, 2018
JOURNAL
OPEN ACCESS
In order to produce a mat, it is necessary to obtain impregnating property, uniformity, corrosion resistance and strength necessary for handling. In this paper, we evaluate the standard physical properties of chopped strand mat, mat strength evaluation and calculation method, bending stiffness test method, evaluation method of uniform dispersion, impregnation test method, product quality evaluation method, boiling water immersion test method, long-term deterioration test method and strength test method will be described.
View full abstract
-
Taiga Tatsumi, ZhenHong Wang, Hiroyuki Doi, Shinichi Tamura, Yoshinori ...
2016 Volume 2 Issue 2 Pages
231-236
Published: 2016
Released on J-STAGE: April 13, 2018
JOURNAL
OPEN ACCESS
We have succeeded to develop a technique enabling molecular level composite treatment by utilizing electrical characteristic of ion of the materials to form 3D micro-structure. It can be bind three-dimensionally and selectively cross points of continuous (fibriform) object of micrometer size with high-speed and low cost by condensing binder particles electrically only to the cross points of the fiber bundles. In this paper, electric field strength is analyzed around the cross point, and the optimum size (diameter) of the binder is shown to be the same as the fiber bundle diameter which is known empirically. Application fields of the proposed technique may be fiber process, and composite material process. We have presented here results applied to forming mat structure which is formed by resin binding between fiber bundles composed of short E-glass fibers. Especially we have succeeded to reduce amount of binder by applying surfactant to fiber to be expected to reduce 70-80 % of cost.
View full abstract
-
Taiga Tatsumi, ZhenHong Wang, Shuji Shinya, Hiroyuki Doi, Shinichi Tam ...
2016 Volume 2 Issue 2 Pages
237-240
Published: 2016
Released on J-STAGE: April 13, 2018
JOURNAL
OPEN ACCESS
One method of preparing a sizing agent is Open Cooker Method, which cooks gelatinize with a lid-free container. In this study, we analyzed the elongation, film formation, ash etc. of four kinds of Japanese starch NBL-130, Starch G, NBL-505 and Starch 10, suitable for open cooker method, and compared with the imported starch product. From this study, there were no products with the same quality as NBL-130, Starch G, NBL-505, and Starch 10 among the inbred starch samples.
View full abstract
-
(Machine translation)
Taiga Tatsumi, ZhenHong Wang, Shuji Shinya, Hiroyuki Doi, Shinichi Tam ...
2016 Volume 2 Issue 2 Pages
241-244
Published: 2016
Released on J-STAGE: April 13, 2018
JOURNAL
OPEN ACCESS
One method of preparing a sizing agent is Open Cooker Method, which cooks gelatinize with a lid-free container. In this study, we analyzed the elongation, film formation, ash etc. of four kinds of Japanese starch NBL-130, Starch G, NBL-505 and Starch 10, suitable for open cooker method, and compared with the imported starch product. From this study, there were no products with the same quality as NBL-130, Starch G, NBL-505, and Starch 10 among the inbred starch samples.
View full abstract
-
Taiga Tatsumi, ZhenHong Wang, Shinichi Tamura, Yoshinori Nishino
2016 Volume 2 Issue 2 Pages
245-250
Published: 2016
Released on J-STAGE: April 13, 2018
JOURNAL
OPEN ACCESS
This research is a report on research results on the surface activity and coupling effect of the sizing agent used for sizing materials of glass fiber mats. It is turned out that the effect of using an olefin surfactant as a CSM convergence aid for producing the effect of minimizing the amount of vat binder necessary for CSM forming is that the necessary binder amount can be drastically reduced to a maximum of 1/5.
View full abstract
-
(Machine translation)
Taiga Tatsumi, ZhenHong Wang, Shinichi Tamura, Yoshinori Nishino
2016 Volume 2 Issue 2 Pages
251-256
Published: 2016
Released on J-STAGE: April 13, 2018
JOURNAL
OPEN ACCESS
This research is a report on research results on the surface activity and coupling effect of the sizing agent used for sizing materials of glass fiber mats. It is turned out that the effect of using an olefin surfactant as a CSM convergence aid for producing the effect of minimizing the amount of vat binder necessary for CSM forming is that the necessary binder amount can be drastically reduced to a maximum of 1/5.
View full abstract
-
ZhenHong Wang, Taiga Tatsumi, Shinichi Tamura, Yoshinori Nishino
2016 Volume 2 Issue 2 Pages
257-262
Published: 2016
Released on J-STAGE: April 13, 2018
JOURNAL
OPEN ACCESS
Emulsion mat binder is excellent in flexibility and impregnating property. The main material consists of an emulsified material selected from PVAc, EVA, PET, etc. In this paper, we have reported on verification test results of successful reduction of conventional PVAc-based binder requirement by about 1/3 for mat binder of acrylic emulsion forming mat with less addition amount.
View full abstract
-
(Machine translation)
ZhenHong Wang, Taiga Tatsumi, Shinichi Tamura, Yoshinori Nishino
2016 Volume 2 Issue 2 Pages
263-268
Published: 2016
Released on J-STAGE: April 13, 2018
JOURNAL
OPEN ACCESS
Emulsion mat binder is excellent in flexibility and impregnating property. The main material consists of an emulsified material selected from PVAc, EVA, PET, etc. In this paper, we have reported on verification test results of successful reduction of conventional PVAc-based binder requirement by about 1/3 for mat binder of acrylic emulsion forming mat with less addition amount.
View full abstract