The aesthetic consciousness of patients has been improved in last few years. Because of pulp protection and tooth treatment, the laminate veneer restoration is needed to be very thin restoration material. As a first step, We examined influences of color by the thickness of porcelain in this experiment before examining the influence to the color of restoration materials by that of resin cement at attachment of laminate veneer restoration.
The colors were measured by Spectrophotometer with three different types of porcelains (Crown Porcelain, Abutment Porcelain and Masking Porcelain).
The results are the following:
1.The color differences were easy to find between the thickness of 0.6mm and 1.4mm for L* with Crown Porcelain.
2.Color differences were easy to find the thickness under 1.5mm for L* with Crown Porcelain in both A2 and A3.
3.The color differences were easy to find between the thickness of 0.5mm and 1.0mm for b* with Crown Porcelain.
4.When L* was higher level with Abutment Porcelain, a* was lower level with Abutment Porcelain. When L* was lower level with Abutment Porcelain, a* washigher level with Abutment Porcelain.
5.When the color was darker with Abutment Porcelain, L* become lower level with Abutment Porcelain. When the thickness was increased with Abutment Porcelain,L* become lower level with Abutment Porcelain as well.
6.The ratio of the transmittance for Masking Porcelain is around 30% to 50% under clinical use.
View full abstract