This paper discusses the concept of PON standards convergence. The history of PON standardization is reviewed in brief as a way to explain how the industry arrived at its current divergent form. The reasons why convergence is favorable are enumerated, with a focus on what has changed since the last round of standardization. Finally, some paths forward are proposed.

The intermediate frequency-over-fiber (IFoF) technology has attracted attention as an alternative transmission scheme to the functional split for the next-generation mobile fronthaul links due to its high spectral efficiency and perfect centralized control ability. In this paper, we discuss and clarify network architectures suited for IFoF, based on its advantages over the functional split. One of the major problems for IFoF transmission is dispersion-induced RF power fading, which limits capacity and transmission distance. We introduce our previous work, in which high-capacity and long-distance IFoF transmission was demonstrated by utilizing a parallel intensity/phase modulators (IM/PM) transmitter which can effectively avoid the fading. The IFoF technology with the proposed scheme is well suited for the long-distance mobile fronthaul links for the 5th generation (5G) mobile system and beyond.

This paper describes why we require access system virtualization. The purpose of access system virtualization is different from that of core network virtualization. Therefore, a specific approach should be considered such as the separation of software and hardware, interface standardization, or deep softwarization.

The spread of optical access broadband networks using Fiber to the Home (FTTH) has not reached the rural areas of developing countries. The current state of global deployment of ICT indicates that it is difficult to sell network systems as stand-alone products due to prohibitive costs, and the demand is for total services that include construction, maintenance, and operation. Moreover, there is a need to offer proposals that include various solutions utilizing broadband networks, as well as for a business model that takes the sustainability of those solutions into consideration. In this paper, we discuss the issues in constructing broadband networks, introduce case studies of solutions using broadband networks for solving social issues in rural areas of developing countries, and discuss the challenges in the deployment of the solutions.

Capital expenditure (CAPEX) reduction and efficient wavelength allocation are critical for the future access networks. Elastic lambda aggregation network (EλAN) based on WDM and OFDM technologies is expected to realize efficient wavelength allocation. In this paper, we propose adaptive bandwidth allocation (ABA) algorithm for EλAN under the conditions of crowded networks, in which modulation format, symbol rate and the number of sub-carriers are adaptively decided based on the distance of PON-section, QoS and bandwidth demand of each ONU. Network simulation results show that the proposed algorithm can effectively reduce the total bandwidth and achieve steady high spectrum efficiency and contribute to the further reduction of CAPEX of future optical access networks.

We propose a time synchronization technique for mobile base stations (BSs) by distributing the reference time information from one optical network unit (ONU) to the BSs under different ONUs over Time Division Multiplexing Passive Optical Network (TDM-PON) using common Precision Time Protocol (PTP). The time accuracy, long term time stability and time source switchover functionality for redundancy are confirmed by experimental verification. Furthermore, an interoperability test between a 10G-EPON prototype in which the proposed protocol is implemented and a commercial Time Division Long Term Evolution (TD-LTE) BS is successfully demonstrated obtaining time error within 119ns, which is much less than the criterion value of 1.5µs, for 60 hours.

We present an 82.5GS/s over-sampling based burst-mode clock and data recovery (BM-CDR) IC chip-set comprising an 82.5GS/s over-sampling IC using 8×10.3GHz multi-phase clocks and a dual-rate data selector logic IC to realize the 10.3Gb/s and 1.25Gb/s dual-rate burst-mode fast-lock operation required for 10-Gigabit based fiber-to-the-x (FTTx) services supported by 10-Gigabit Ethernet passive optical network (10G-EPON) systems. As the key issue for designing the proposed 82.5GS/s BM-CDR, a fresh study of the optimum number of multi-phase clocks, which is equivalent to the sampling resolution, is undertaken, and details of the 10.3Gb/s cum 1.25/Gb/s dual-rate optimum phase data selection logic based on a blind phase decision algorithm, which can realize a full single-platform dual-rate BM-CDR, ate also presented. By using the power of the proposed 82.5GS/s over-sampling BM-CDR in cooperation with our dual-rate burst-mode optical receiver, we further demonstrated that a short dual-rate and burst-mode preamble of 256ns supporting receiver settling and CDR recovery times was successfully achieved, while obtaining high receiver sensitivities of -31.6dBm at 10.3Gb/s and -34.6dBm at 1.25Gb/s and a high pulse-width distortion tolerance of +/-0.53UI, which are superior to the 10G-EPON standard.

Stochastic resonance can improve the signal-to-noise ratio of digital baseband signals. However, the output of SR system needs some time for evolution to achieve global steady-state. This paper first analyzes the evolution time of SR systems, which is an important factor for digital baseband signal processing based on SR. This investigation shows that the sampling number per symbol should be rather large, and the minimum sampling number per symbol is deduced according to the evolution time of SR system.

Due to the structure complexity, it is difficult to display structure of large-scale network fully. To solve the problem, this paper research on network simplification and accelerating drawing. Specific research content includes accelerated network layout based on quadtree and community geometric constrain, aiming to provide overall situation perception of network topology. Experiment results show that this method can quickly visualize complex structure of large-scale network, and present overall situation and structural characteristics of the network by clear and understandable visual expression, and contribute to mining and awareness of network connection mode and structural characteristics.

Mobile cloud computing (MCC) has been proposed as a new approach to enhance mobile device performance via computation offloading. The growth in cloud computing energy consumption is placing pressure on both the environment and cloud operators. In this paper, we focus on energy-efficient resource management in MCC and aim to reduce cloud operators' energy consumption through resource management. We establish a deterministic resource management model by solving a combinatorial optimization problem with constraints. To obtain the resource management strategy in deterministic scenarios, we propose a deterministic strategy algorithm based on the adaptive group genetic algorithm (AGGA). Wireless networks are used to connect to the cloud in MCC, which causes uncertainty in resource management in MCC. Based on the deterministic model, we establish a stochastic model that involves a stochastic optimization problem with chance constraints. To solve this problem, we propose a stochastic strategy algorithm based on Monte Carlo simulation and AGGA. Experiments show that our deterministic strategy algorithm obtains approximate optimal solutions with low algorithmic complexity with respect to the problem size, and our stochastic strategy algorithm saves more energy than other algorithms while satisfying the chance constraints.

The widespread application of mobile electronic devices has triggered a boom in energy consumption, especially in user equipment (UE). In this paper, we investigate the energy-efficiency (EE) of a UE experiencing the worst channel conditions, which is termed worst-EE. Due to the limited battery of the mobile equipment, worst-EE is a suitable metric for EE fairness optimization in the uplink transmissions of orthogonal frequency division multiple access (OFDMA) networks. More specifically, we determine the optimal power and sub-carrier allocation to maximize the worst-EE with respect to UEs' transmit power, sub-carriers and statistical quality-of-service (QoS). In order to maximize the worst-EE, we formulate a max-min power and sub-carrier allocation problem, which involves nonconvex fractional mixed integer nonlinear programming, i.e., NP-hard to solve. To solve the problem, we first relax the allocation of sub-carriers, formulate the upper bound problem on the original one and prove the quasi-concave property of objective function. With the aid of the Powell-Hestenes-Rockfellar (PHR) approach, we propose a fairness EE sub-carrier and power allocation algorithm. Finally, simulation results demonstrate the advantages of the proposed algorithm.

The recent switch from analog to digital TV broadcasting around the world has led to the development of communications standards that consider the use of TV White Spaces (TVWS). One such standard is the IEEE 802.22 wireless regional area network (WRAN), which considers the use of TVWS to provide broadband wireless services over long transmission links, and therefore presents an opportunity to bring connectivity and data-based services from urban to rural areas. Services that could greatly benefit from the deployment of wireless broadband data links between urban and rural areas are those related to telemedicine and m-health. To enable proper telemedicine service delivery from urban (e.g. an urban hospital) to rural locations (e.g. a rural clinic) it is of paramount importance to provide a certain quality of service (QoS) level. In this context, QoS provisioning for telemedicine applications over wireless networks presents a major challenge that must be addressed to fulfill the potential that rural wireless telemedicine has to offer. In this paper, a cross-layer approach combining medium access control (MAC) and application (APP) layers is proposed with the aim of reducing blocking probability in teleconsulting services operating over IEEE802.22/WRANs. At the APP layer, a teleconsulting traffic profile based on utilization rates is defined. On the other hand, at the MAC layer, an Adaptive Bandwidth Management (ABM) mechanism is used to perform a QoS-based classification of teleconsulting services and then dynamically allocate the bandwidth requirements. Three teleconsulting services with different bandwidth requirements are considered in order to evaluate the performance of the proposed approach: high-resolution teleconsulting, medium-resolution teleconsulting, and audio-only teleconsulting. Simulation results demonstrate that the proposed approach is able to reduce blocking probability by using different criteria for service modes within the admission control scheme.

This paper proposes a transmission control protocol (TCP) for long distance high-speed wireless communications, including free-space optical communications (FSOC). Extreme high frequency of wireless communications enables high-speed bit rate, but frequent signal error, including burst error, can be a quite severe problem for ordinary high-speed TCPs. To achieve 10Gbps or higher data transfer throughput on FSOC, the proposed TCP (designated “TCP-FSO”) has improved and new features including multi-layer congestion control, retransmission control with packet loss point estimation, delay-based ACK congestion control, and ACK retransmission control. We evaluated data transfer throughput of TCP-FSO and the other TCPs, by throughput model analysis and experiment on real implementation. Obtained results show that TCP-FSO achieves far higher data transfer throughput than other high-speed TCPs. For example, it achieved a thousand times higher throughput than the other high-speed TCPs in a real FSOC environment.

In this study, a plasma loop tube is presented as a tunable VHF-UHF band plasma antenna. In plasma medium, wave radiation mechanism is due to ionized gas instead of metal. Meanwhile, the most important advantage of plasma elements is electronic tunability rather than the rigid and fixed features of metals. Here, we employ an external magnetic field as a background to affect the plasma without any shape, gas or source manipulation. Finite difference time domain (FDTD) is performed for plasma antenna analysis. The FDTD formulation should be adapted to fluid modeling of plasma in the anisotropic zone in the presence of an external magnetic field. The bandwidth coverage of 700MHz is obtained by designing correctly. Parametric study in return loss, gain and radiation pattern are studied here and other new points are presented as well.

This paper improves radiation patterns and impedance matching of a broadband sleeve dipole antenna. A broadband sleeve dipole antenna is designed and the effect of the structure parameters on the |S₁₁| characteristics is calculated. Current distributions of the resonance frequencies are calculated. A broadband sleeve dipole antenna with plate element is proposed. Better impedance matching is obtained by adjusting the size of the plate element. The nulls of the radiation patterns are reduced at high frequencies and the gain in the horizontal direction is improved.

The impedance expansion method (IEM), which was previously proposed by the authors, is a circuit-modeling technique for electrically-very-small devices. The equivalent circuits derived by the IEM include dependent voltage sources proportional to the powers of the frequency. However, the previous report did not describe how circuit simulators could realize such dependent voltage sources. This paper shows how this can be achieved by approximating the equivalent circuit using only passive elements.

In this paper, a new array geometry is proposed which is capable of performing underdetermined Direction-Of-Arrival (DOA) estimation for the circular array configuration. DOA estimation is a classical problem and one of the most important techniques in array signal processing as it has applications in wireless and mobile communications, acoustics, and seismic sensing. We consider the problem of estimating DOAs in the case when we have more sources than the number of physical sensors where the resolution must be maintained. The proposed array geometry called Nested Sparse Circular Array (NSCA) is an extension of the two level nested linear array obtained by nesting two sub-circular arrays and one element is placed at the origin. In order to extend the array aperture, a Khatri-Rao (KR) approach is applied to the proposed NSCA which yields the virtual array structure. To utilize the increase in the degrees of freedom (DOFs) that this new array provides, a subspace based approach (MUSIC) for DOA estimation and l₁-based optimization approach is extended to estimate DOAs using NSCA. Simulations show that better performance for underdetermined DOA estimation is achieved using the proposed array geometry.

This work presents a hybrid formulation of the stochastic reduced order model (SROM) algorithm, which makes use of Gauss quadrature, a key ingredient of the stochastic collocation method, to avoid the cumbersome optimization process required by SROM for optimal extraction of the sample set. With respect to classic SROM algorithms, the proposed formulation allows a significant reduction in computation time and burden as well as a remarkable improvement in the accuracy and convergence rate in the estimation of statistical moments. The method is here applied to a specific case study, that is the prediction of crosstalk in a two-conductor wiring structure with electrical and geometrical parameters not perfectly known. Both univariate and multivariate analyses are carried out, with the final objective being to compare the performance of the two SROM formulations with respected to Monte Carlo simulations.

This paper studies a wireless powered communication network (WPCN) with non-orthogonal multiple access (NOMA) under successive interference cancellation (SIC) constraints, where the users first harvest energy from the power station and then transmit data to the information receiver simultaneously. Under this setup, we investigate the system throughput maximization problem. We first formulate an optimization problem for a general case, which is non-convex. To derive the optimal solution, new variables are introduced to transform the initial problem into a convex optimization problem. For a special case, i.e., two-user case, the optimal solution is derived as a closed-form expression. Simulations on the effect of SIC constraints show the importance of the distinctness among users' channels for the proposed model.

Massive multiple-input and multiple-output (MIMO) is a key technology to meet the increasing capacity demands that must be satisfied by next generation wireless systems. However, it is expensive to use linear power amplifiers when implementing a massive MIMO system as it will have hundreds of antennas. In this paper, considering that low peak-to-average power ratio (PAPR) of transmit signals can facilitate hardware-friendly equipment with nonlinear but power-efficient amplifiers, we first formulate the precoding scheme as a PAPR minimization problem. Then, in order to obtain the optimal solution with low complexity, the precoding problem is recast into a Bayesian estimation problem by leveraging belief propagation algorithm. Eventually, we propose a low-PAPR approximate message passing (LP-AMP) algorithm based on belief propagation to ensure the good transmission performance and minimize the PAPR to realize practical deployments. Simulation results reveal that the proposed method can get PAPR reduction and adequate transmission performance, simultaneously, with low computational complexity. Moreover, the results further indicate that the proposed method is suitable for practical implementation, which is appealing for massive multiuser MIMO (MU-MIMO) systems.

In this paper, we investigate the capacity performance of an in-band full-duplex (IBFD) amplify-and-forward two-way relay system under the effect of residual loop-back-interference (LBI). In a two-way IBFD relay system, two IBFD nodes exchange data with each other via an IBFD relay. Both two-way relaying and IBFD one-way relaying could double the spectrum efficiency theoretically. However, due to imperfect channel estimation, the performance of two-way relaying is degraded by self-interference at the receiver. Moreover, the performance of the IBFD relaying is deteriorated by LBI between the transmit antenna and the receive antenna of the node. Different from the IBFD one-way relay scenario, the IBFD two-way relay system will suffer from an extra level of LBI at the destination receiver. We derive accurate approximations of the average end-to-end capacities for both the IBFD and half-duplex modes. We evaluate the impact of the LBI and channel estimation errors on system performance. Monte Carlo simulations verify the validity of analytical results. It can be shown that with certain signal-to-noise ratio values and effective interference cancellation techniques, the IBFD transmission is preferable in terms of capacity. The IBFD two-way relaying is an attractive technique for practical applications.

In mobile and wireless networks, controlling data delivery latency is one of open problems due to the stochastic nature of wireless channels, which are inherently unreliable. This paper explores how the current best-effort throughput-oriented wireless services might evolve into latency-sensitive enablers of new mobile applications such as remote three-dimensional (3D) graphical rendering for interactive virtual/augmented-reality overlay. Assuming that the signal propagation delay and achievable throughput meet the standard latency requirements of the user application, we examine the idea of trading excess/federated bandwidth for the elimination of non-negligible delay of data re-ordering, caused by temporal transmission failures and buffer overflows. The general system design is based on (i) spatially diverse data delivery over multiple paths with uncorrelated outage likelihoods; and (ii) forward packet-loss protection (FPP), creating encoding redundancy for proactive recovery of intolerably delayed data without end-to-end retransmissions. Analysis and evaluation are based on traces of real life traffic, which is measured in live carrier-grade long term evolution (LTE) networks and campus WiFi networks, due to no such system/environment yet to verify the importance of spatial diversity and encoding redundancy. Analysis and evaluation reveal the seriousness of the latency problem and that the proposed FPP with spatial diversity and encoding redundancy can minimize the delay of re-ordering. Moreover, a novel FPP effectiveness coefficient is proposed to explicitly represent the effectiveness of EPP implementation.

This paper proposes the mesh-topology based wireless-powered communication network (MT-WPCN), which consists of a hybrid-access point (H-AP) and nodes. The H-AP broadcasts energy to all nodes by wireless, and the nodes harvest the energy and then communicate with other nodes including the H-AP. For the communication in the MT-WPCN, we propose the harvest-then-transceive protocol to ensure that the nodes can harvest energy from the H-AP and transmit information selectively to the H-AP or other nodes, which is not supported in most protocols proposed for the conventional WPCN. In the proposed protocol, we consider that the energy harvesting can be interrupted at nodes, since the nodes cannot harvest energy during transmission or reception. We also consider that the harvested energy is consumed by the reception of information from other nodes. In addition, the energy reservation model is required to guarantee the QoS, which reserves the infimum energy to receive information reliably by the transmission power control. Under these considerations, first, we design the half harvest-then-transceive protocol, which indicates that a node transmits information only to other nodes which do not transmit information yet, for investing the effect of the energy harvesting interruption. Secondly, we also design the full harvest-then-transceive protocol for the information exchange among nodes and compatibility with the conventional star-topology based WPCN, which indicates that a node can transmit information to any network unit, i.e., the H-AP and all nodes. We study the sum-throughput maximization in the MT-WPCN based on the half and full harvest-then-transceive protocols, respectively. Furthermore, the amount of harvested energy is analytically compared according to the energy harvesting interruption in the protocols. Simulation results show that the proposed MT-WPCN outperforms the conventional star-topology based WPCN in terms of the sum-throughput maximization, when wireless information transmission among nodes occurs frequently.

Vehicular Ad hoc Network (VANET) is an important part of the Intelligent Transportation System (ITS). VANETs can realize communication between moving vehicles, infrastructures and other intelligent mobile terminals, which can greatly improve the road safety and traffic efficiency effectively. Existing studies of vehicular ad hoc network usually consider only one data transmission model, while the increasing density of traffic data sources means that the vehicular ad hoc network is evolving into Heterogeneous Vehicular Network (HetVNET) which needs hybrid data transmission scheme. Considering the Heterogeneous Vehicular Network, this paper presents a hybrid transmission MAC protocol including vehicle to vehicle communication (V2V) and vehicle to infrastructure communication (V2I/I2V). In this protocol, the data are identified according to timeliness, on the base of the traditional V2V and V2I/I2V communication. If the time-sensitive data (V2V data) fail in transmission, the node transmits the data to the base station and let the base station cooperatively transmit the data with higher priority. This transmission scheme uses the large transmission range of base station in an effective manner. In this paper, the queueing models of the vehicles and base station are analyzed respectively by one-dimensional and two-dimensional Markov Chain, and the expressions of throughput, packet drop rate and delay are also derived. The simulation results show that this MAC protocol can improve the transmission efficiency of V2V communication and reduce the delay of V2V data without losing the system performance.

In conventional multiview video systems using progressive download, a user downloads videos of all viewpoints of one content to realize smooth view switching. This, however, increases the video traffic, and if the available download rate is low, the video quality suffers. Downloading only the desired viewpoint is one approach for reducing the traffic. However, in this case, playback stalls will occur after view switching. These stalls degrade the user's satisfaction for the application. In this paper, we aim at two objectives: 1) to achieve reduction in video traffic and 2) to minimize the number of playback stalls. To this end, we propose a new multiview video delivery scheme for progressive download. The main idea of the proposed scheme is that the user downloads a part of viewpoints only, which will be played back by the user with a high probability, to realize both traffic reduction and smooth view switching. In addition, we propose two download-scheduling algorithms to prevent playback stalls even at low download rates. The first algorithm prevents stalls in the cases with frequent view switching, such as zapping, while the second prevents stalls in gazing cases. Evaluations using a Joint Multiview Video Coding (JMVC) encoder and multiview video sequences show that our scheme achieves not only reduced video traffic but also decreased number of playback stalls, regardless of the user's view-switching model or download rate. In addition, we demonstrate that the proposed method does not cause playback stalls irrespective of high and low motion video contents.

In this paper, we propose a quality-level control method based on quality of experience (QoE) characteristics for HTTP adaptive streaming (HAS). The proposed method works as an adaptive bitrate controller on the HAS client. The proposed method consists of two operations: buffer-aware control and QoE-aware control. We implement the proposed method on an actual dynamic adaptive streaming over HTTP (DASH) program and evaluate the QoE performance of the proposed method via both objective and subjective evaluations. The results show that the proposed method effectively improves both objective and subjective QoE performances by preventing stalling events and quality-level switchings that have a negative influence on subjective QoE performance.