This paper studies the design of cooperative beamforming (CB) and cooperative jamming (CJ) for the physical layer security of an amplify-and-forward (AF) relay network in the presence of multiple multi-antenna eavesdroppers. The secrecy rate maximization (SRM) problem of such a network is to maximize the difference of two concave functions, a problem which is non-convex and has no efficient solution. Based on the inner convex approximation (ICA) and semidefinite relaxation (SDR) techniques, we propose two novel low-complexity schemes to design CB and CJ for SRM in the AF network. In the first strategy, relay nodes adopt the CB only to secure transmission. Based on ICA, this design guarantees convergence to a Karush-Kuhn-Tucker (KKT) solution of the SDR of the original problem. In the second strategy, the optimal joint CB and CJ design is studied and the proposed joint design can guarantee convergence to a KKT solution of the original problem. Moreover, in the second strategy, we prove that SDR always has a rank-1 solution for the SRM problem. Simulation results show the superiority of the proposed schemes.

View full abstract

In data center networks, group communication is currently playing an important role and multicast communications is an effective way to support group communication for large numbers of virtual machines. Layer-2 congestion control named QCN (Quantized Congestion Notification) has been proposed to realize the high reliability required by LAN/SAN integration in data center networking. Our preliminary evaluation in this paper shows that a multicast flow suffers lower throughput than unicast flows when conventional QCN is applied in a naive manner. This is because a sending device receives congestion feedback from multiple locations on a multicast tree and decreases transmission rate accordingly. To counter this throughput degradation of multicast flows, we propose a new Layer 2 congestion control algorithm in multicast environment, Quantized Congestion Notification with Bottleneck Selection (QCN/BS). In QCN/BS, the switch in the worst congestion level is selected and the transmission rate of the sending device is calculated exclusively according to feedback from the selected switch. Simulation results show that when conventional QCN is used, a multicast flow experiences lower and more severely unfair throughput than a unicast flow. The proposed QCN/BS resolves this problem.

View full abstract

This paper proposes the design of small CRPA arrays for dual-band Global Positioning System (GPS) applications. The array consists of five elements and is mounted on a circular ground platform with a diameter of 15-cm. Each antenna element has a coupled feed structure and consists of a feed patch and two radiating patches for dual-band operation. An external chip coupler is utilized for a broad circular polarization (CP) bandwidth, and its measured characteristics are taken into account in our simulation for more accurate performance estimation. Detailed parameters are optimized by using a genetic algorithm (GA) in conjunction with the FEKO EM simulator. The optimized antenna is fabricated on a ceramic substrate, and its performance is measured in a full anechoic chamber. Furthermore, a field test is also conducted to verify the signal-to-noise ratio (SNR) for real GPS satellite signals. The results prove that the proposed array is suitable for use in GPS CRPA applications.

View full abstract

Honeycomb structures are widely used in aerospace industry because of the lightweight and durable properties they provide. Here we propose to use a honeycomb core as the wave guiding structure in Radial Line Slot Antennas (RLSAs). This paper quantifies the propagation characteristics, especially the loss due to the honeycomb. At 32GHz, by choosing the proper cell size, both good isotropy and reasonably low effective dielectric constants are realized with the honeycomb as a spacer in a radial line waveguide. To estimate the material loss factor, several methods are compared and a factor of about 0.014∼0.018dB/mm is predicted and measured. A fabricated 90cm diameter honeycomb RLSA suffers about a 3.5∼5dB loss, which coincides with the estimates using the predicted loss factor.

View full abstract

In this paper, we consider decouple-and-forward (DCF) relaying, where the relay encodes and amplifies decoupled data using orthogonal space-time block codes (OSTBCs), to achieve the maximum diversity gain of multiple-input multiple-output (MIMO) amplify-and-forward (AF) relaying. Since the channel status of all antennas is generally unknown and time-varying for cooperation in multi-antenna multiple-relay systems, we investigate an opportunistic relaying scheme for DCF relaying to harness distributed antennas and minimize the cooperation overheads by not using the global channel state information (CSI). In addition, for realistic wireless channels which have spatial fading correlation due to closely-spaced antenna configurations and poor scattering environments, we analyze the exact and lower bound on the symbol error probability (SEP) of the opportunistic DCF relaying over spatially correlated MIMO Rayleigh fading channels. Numerical results show that, even in the presence of spatial fading correlation, the proposed opportunistic relaying scheme is efficient and achieves additional performance gain with low overhead.

View full abstract

The composite binary offset carrier (CBOC) modulated signal contains multi-peaks in its auto-correlation function, which brings ambiguity to the signal acquisition process of a GNSS receiver. Currently, most traditional ambiguity-removing schemes for CBOC signal acquisition approximate CBOC signal as a BOC signal, which may incur performance degradation. Based on Galileo E1 CBOC signal, this paper proposes a novel adaptive ambiguity-removing acquisition scheme which doesn't adopt the approximation used in traditional schemes. According to the energy ratio of each sub-code of CBOC signal, the proposed scheme can self-adjust its local reference code to achieve unambiguous and precise signal synchronization. Monte Carlo simulation is conducted in this paper to analyze the performance of the proposed scheme and three traditional schemes. Simulation results show that the proposed scheme has higher detection probability and less mean acquisition time than the other three schemes, which verify the superiority of the proposed scheme.

View full abstract

Multi-cell cooperation is a promising technique to mitigate inter-cell interference arising from universal frequency reuse in cellular networks. Sharing channel state information (CSI) in neighboring cells can help enhance the overall system capacity at the cost of high feedback burden. In this paper, an asymmetric CSI feedback strategy is proposed for multi-cell cooperation beamforming. In order to improve the overall system performance, we optimize the limited feedback bandwidth based on the average received power from both serving and neighboring cells. Simulation results show that the proposed strategy utilizes the limited feedback bandwidth more efficiently, thereby achieving a higher sum rate.

View full abstract

Wireless body area networks (BANs) are attracting great attention as a future technology of wireless networks for healthcare and medical applications. Wireless BANs can generally be divided into two categories, i.e., wearable BANs and implant BANs. However, the performance requirements and channel propagation characteristics of these two kinds of BANs are quite different from each other, that is, wireless signals are approximately transmitted along the human body as a surface wave in wearable BANs, on the other hand, the signals are transmitted through the human tissues in implant BANs. As an effective solution for this problem, this paper first introduces a dual-mode communication system, which is composed of transmitters for in-body and on-body communications and a receiver for both communications. Then, we evaluate the bit error rate (BER) performance of the dual-mode communication system via computer simulations based on realistic channel models, which can reasonably represent the propagation characteristics of on-body and in-body communications. Finally, we conduct a link budget analysis based on the derived BER performances and discuss the link parameters including system margin, maximum link distance, data rate and required transmit power. Our computer simulation results and analysis results demonstrate the feasibility of the dual-mode communication system in wireless BANs.

View full abstract

This study analyzes the performance of a downlink beamformer with partitioned vector quantization under optimized feedback budget allocation. A multiuser multiple-input single-output downlink precoding system with perfect channel state information at mobile stations is considered. The number of feedback bits allocated to the channel quality indicator (CQI) and the channel direction indicator (CDI) corresponding to each partition are optimized by exploiting the quantization mean square error. In addition, the effects of equal and unequal partitioning on codebook memory and system capacity are studied and elucidated through simulations. The results show that with optimized CQI-CDI allocation, the feedback budget distributions of equal or unequal partitions are proportional to the size ratios of the partitioned subvectors. Furthermore, it is observed that for large-sized partitions, the ratio of optimal CDI to CQI is much higher than that for small-sized partitions.

View full abstract

Instantaneous ambiguity resolution techniques are methods employed to achieve real-time high-accuracy positioning. The advent of the Chinese BeiDou system enables us to evaluate the performance of the combined GPS/BeiDou/QZSS dual-frequency ambiguity resolution and BeiDou three-frequency ambiguity resolution. It is known that the increasing number of satellites used can increase the reliability as well as the availability of single-epoch real-time kinematic (RTK) information. Therefore, performance improvement of single-epoch RTK by adding BeiDou satellites is strongly expected because many BeiDou satellites are operated in Asian regions. The first objective of this study is to conduct an initial assessment of the single-epoch RTK performance, as well as standalone positioning/code relative positioning using GPS/BeiDou/QZSS. The second objective of this study is to evaluate the performance of the longer-baseline single-epoch ambiguity resolution using the three-frequency observation data. Furthermore, the possibility of future single-epoch RTK service is discussed in this paper.

View full abstract

Synthetic aperture radar (SAR) is an indispensable tool for low visibility ground surface measurement owing to its robustness against optically harsh environments such as adverse weather or darkness. As a leading-edge approach for SAR image processing, the coherent change detection (CCD) technique has been recently established; it detects a temporal change in the same region according to the phase interferometry of two complex SAR images. However, in the case of general damage assessment following an earthquake or mudslide, the technique requires not only the detection of surface change but also an assessment for height change quantity, such as occurs with a building collapse or road subsidence. While the interferometric SAR (InSAR) approach is suitable for height assessment, it is basically unable to detect change if only a single observation is made. To address this issue, we previously proposed a method of estimating height change according to phase interferometry of the coherence function obtained by dual band-divided SAR images. However, the accuracy of this method significantly degrades in noisy situations owing to the use of the phase difference. To resolve this problem, this paper proposes a novel height estimation method by exploiting the frequency characteristic of coherence phases obtained by each SAR image multiply band-divided. The results obtained from numerical simulations and experimental data demonstrate that our proposed method offers accurate height change estimation while avoiding degradation in the spatial resolution.

View full abstract

We consider the method of evaluating the detection performance of a single pulse monostatic radar for a fluctuating target in compound-Gaussian clutter plus noise background. The system uses a coded pulse compression waveform as its transmitting signal and the linear minimum mean square error (LMMSE) based reiterated filtering, also known as the adaptive pulse compression (APC). We study the theoretical statistical characteristics of the amplitude of the APC estimation for infinite iterations in this scenario. Based on this theory, we derive both the theoretical probability of false alarm and the probability of detection for the ‘ideal constant false alarm rate (CFAR)’ detector that uses amplitude of the APC estimation as the test statistics. Finaly, we verify the validity of the theoretical detection performance calculations with Monte Carlo simulations. The simulations include three different compound-Gaussian clutter models and all theoretical results well fit the simulated ones.

View full abstract

Recent studies have focused on developing security systems using micro-Doppler radars to detect human bodies. However, the resolution of these conventional methods is unsuitable for identifying bodies and moreover, most of these conventional methods were designed for a solitary or sufficiently well-spaced targets. This paper proposes a solution to these problems with an image separation method for two closely spaced pedestrian targets. The proposed method first develops an image of the targets using ultra-wide-band (UWB) Doppler imaging radar. Next, the targets in the image are separated using a supervised learning-based separation method trained on a data set extracted using a range profile. We experimentally evaluated the performance of the image separation using some representative supervised separation methods and selected the most appropriate method. Finally, we reject false points caused by target interference based on the separation result. The experiment, assuming two pedestrians with a body separation of 0.44m, shows that our method accurately separates their images using a UWB Doppler radar with a nominal down-range resolution of 0.3m. We describe applications using various target positions, establish the performance, and derive optimal settings for our method.

View full abstract

We propose an architecture for offloading processes in applications to support low-performance devices. Almost all applications based on standardized web technologies are compatible with our architecture. We discuss how interfaces should be used properly to offload processes in JavaScript and argue that an interface for offloading should only be used for defining complex processes. We also propose a method for applying our architecture to web applications that use web workers. Our method automatically offloads some worker processes to the cloud. We also compare the processing times achieved with and without our method. Our architecture exhibits good efficacy with regards to the N-Queen problem, although it is influenced by network latency between a device and the cloud.

View full abstract