The　purpose of this paper is to present the basic data relating to the reliability of the electrical installation at the large-scale office building. The maintenance record data of A-building，its total floor area is 74,827㎡, and observation term is 1,795days，and B-building 142,759㎡, 3,910days，are obtained. The number of troubles occurred at the electrical installation of A-building and B-building during the observation terms are 214 and 2,515 respectively. At first，the characteristics of the occurrence of troubles of the electrical installation are grasped by comparing with that of the other building equipment. Then the Weibull analysis are adopted to the time between trouble data, and the repair time data are analyzed on logarithmic-normal probability paper. The reliability of the electrical installation of A-and B-building are clarified.

抄録全体を表示

This paper investigates the Maximum Power Point Tracking (MPPT) control method　for a stand-alone-type PV generation system with a buck-type DC-DC converter. In this method，it is possible to the maximum power possible under the current conditions by sequentially performing the maximum power point detection and the tracking operation for a fixed number of cycles. In this paper，the elimination of the required inductor current sensing is investigated. Furthermore, the calculation method for the lower limit value of smoothing inductance and the appropriate detection cycles are clarified. Experiments performed on a stand-alone-type PV generation system revealed that this MPPT method yields an extremely high UUF(average solar cell output Useful Utilization Factor) level of 99%.

抄録全体を表示