-
飯田 裕, 田村 章義, 山本 浩
1985 年 51 巻 470 号 p.
2447-2453
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
歯車軸の軸樹部の剛性を考慮すれば,軸が曲げに対して剛であってもねじり振動と横振動は連成する.特に中間歯車軸では,軸上の二つのかみあい線のなす角ならびにかみあい線と軸受部の弾性主軸の方向のなす角により,振動特性が大きく影響される.そこで軸受部の剛性を考慮した多軸歯車系の振動特性について,中間軸を含む最も簡単な系である三軸系をモデルとして理論的・実験的に解析を行った.
抄録全体を表示
-
前澤 成一郎, 天摩 勝洋
1985 年 51 巻 470 号 p.
2454-2462
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
バイオリンの弦のような察弦の手以上振動を弓を弦の間の摩擦特性による負の減衰と空気抵抗,内部摩擦,音響エネルギの支出などによる正の減衰とのバランスによってもたらされる自励持続振動としてできるかぎり厳密に解析することを志している.用いる方法は級数変換を利用するフーリエ級数解法である.本法では正の減衰として小さな空気抵抗だけを受けるとき,微小量の二乗以上を省略して弓力,振動波形などを求めている.
抄録全体を表示
-
野波 健蔵
1985 年 51 巻 470 号 p.
2463-2472
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
不つりあいなどによって回転軸系に発生する遠心力を,軸受支持部に制御力を与えることにより相殺する制御方法,すなわち能動系軸受系をシミュレータ理論を適用して制御系の統計を行っている.この結果,能動系軸受は不つりあい力,不安定化力あるいは基礎から印加される外力に対して十分制振効果を有していることが明らかになった.
抄録全体を表示
-
西郷 宗玄, 岩壼 卓三
1985 年 51 巻 470 号 p.
2473-2478
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
等速自在継手を介して駆動される片持剛性ロータの伝達トルクによるふれまわり振動(トルクふれまわり)を解析した.このトルクふれまわりは自在継手の種類にかかわらず発生する一般的な現象であることがわかった.系の安定解析を行い,軸受剛性異方性,初期交差角,継手内部の減衰力などの不安定境界に及ぼす影響を調べた.
抄録全体を表示
-
梁 保錫, 岩壼 卓三, 川井 良次
1985 年 51 巻 470 号 p.
2479-2486
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
本報ではいままで行った著者らのポンプ用シールの動特性に関する研究をもとにして,ポンプ用シールのロータの安定性に及ぼす影響を調べるために例題として単段両吸込遠心ポンプを用いてウェアリングシール部によって生ずる流体力を軸受部と同等に考え,一種の多軸受支持という認識で安定性の検討を行う.そして各要素ごとの減衰率を用いることによってシール形状および高圧差によるシールの弾性変形の安定性への影響を評価する.
抄録全体を表示
-
吉川 紀夫, 原 文雄
1985 年 51 巻 470 号 p.
2487-2496
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
本論文では直交気液二相気泡流によるピッチ直径比1.33の1列円柱群の揚力方向の振動応答特性について,無次元流速 U/f
0D が2から22の範囲で,ボイド率αの依存性を実験的に明らかにした.気液二相流柱の気泡は振動学的効果として円柱群を制御する効果と励振する効果を有することを明らかにし,それぞれの効果の発現条件を円柱群後流パターンの可視化写真より定性的に考察した.
抄録全体を表示
-
新谷 真功
1985 年 51 巻 470 号 p.
2497-2504
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
定常不規則仮定の地震によって,系の受ける累積損傷度の平均値,分散が,応答倍率λで表される.平均値はλ
2,分散はλ
4で表され,容易に求められる.一自由度系,二自由度系について計算を行い,シミュレーション値の方が大きく,二自由度系の場合は,解析値のほうが大きい.この原因として,入力波のパワーのばらつきが挙げられる.
抄録全体を表示
-
葉山 眞治, 岩淵 正幸
1985 年 51 巻 470 号 p.
2505-2511
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
スロッシング防振法の一つとして,逆U字管によるダイナミックダンパ方式の防振法について研究した.主系である貯槽内液体のスロッシングに逆U字管内水柱の振動を付加し,両者の固有振動数をほぼ等しくすると,両者は近似的に慣性連成による二自由度振動系となり,逆U字管がダイナミックダンパとなること,ばね定数比が3.5~4.5%程度の値でも,応答振幅を無防振の場合の1/6~1/10に減少させることが分かった.
抄録全体を表示
-
梅澤 清彦, 北條 春夫, 北野 正
1985 年 51 巻 470 号 p.
2512-2520
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
機械の騒音源の探査や放射音の評価のため,そのモデルとして長方形鋼板が格子状モードの固有振動数で振動しているとき,近傍での音響インテンシティや粒子速度を計測し,音源をよく表すのには板に垂直方向の粒子速度であり,その位相も含めた遠距離での音圧分布を精度よく推定できることを明らかにした.またモ-ド形状が明らかになったときに音の放射を計算する際,音源を最小の点音源で金治する方法を提案した.
抄録全体を表示
-
猪岡 光, 富岡 義幸
1985 年 51 巻 470 号 p.
2521-2527
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
パディ近似式を積分オペレータとして用いたときの特性について,同時系近似式と非同時系近似式の比較を中心に検討した.すなわち,周波数特性と複素平面の軌跡を用いて両者の特性を固有値の広い範囲にわたって比較し,さらに数値例によっても比較した.以上より,非同次形近似式にもとづく積分法が時間のきざみ幅を大にしても精度がよく,特にスティフな微分方程式に適していることを明らかにした.
抄録全体を表示
-
漆原 煕
1985 年 51 巻 470 号 p.
2528-2536
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
空間の相対性に関する考察により速度・加速度などの定義を精密化し,これによって慣性系と非慣性系を平等に扱うNewton 力学を得た.従来の Newton 力学で非慣性系において現れたみかけの力は,新しい力学では簡単な座標変換法則に従う電磁場に類似の慣性場が質量に及ぼす作用として説明される.この理論により回転・加速などの運動を行う機械部品などに結びつけられた動座標系による運動の議論が単純明快になると期待される.
抄録全体を表示
-
漆原 煕
1985 年 51 巻 470 号 p.
2537-2545
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
直線座標に対する第1報の理論を曲線座表敬に対して拡張した.速度,加速度,幾何学ベクトルの時間変化率などの要素量の定義を曲線系に合うよう一般化することにより,第1報の直線座標系における座標変換式,運動方程式などはそのままの形で曲線動座標系においても成り立つことが示される.本報では極座標系などの曲線座標系や,物体とともに運動・変形する埋め込み座標系による運動の議論を単純明快化すると期待される.
抄録全体を表示
-
堀江 三喜男, 小川 潔, 舟橋 宏明, 阿部 弘
1985 年 51 巻 470 号 p.
2546-2553
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
対偶に遊びのある平面リンク機構について理論解析を行い実験的検討を加え,両解析結果がほぼ一致することを示すとともに対偶素間の分離に三とおりあることを示している.ついで対偶素間の法線方向相違運動が機構の運動方程式を変形して得られる質点,ばねおよびダシュポットからなる一自由度振動系の強制振動とみなせることを示し,三とおりの対偶素間の分離がこの振動系に作用する励振力によって把握できることを明らかにしている.
抄録全体を表示
-
堀江 三喜男, 内藤 保雄, 舟橋 宏明, 小路 直規, 小川 潔
1985 年 51 巻 470 号 p.
2554-2561
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
本論文では,まず対偶の遊びと節の弾性を考慮した平面リンク機構の動的解析を可能にするための理論解析手段を提案している.ついでこれを原・従動節動対偶に遊びがあり中間節が弾性節である平面4節機構に適用し,対偶の遊びおよび節の曲げ剛性対偶素間相違変位,対偶作用力および弾性節の横振動に及ぼす影響を理論的ならびに実験的に明らかにし,さらに弾性節の減衰比を増加させることにより,動特性の改善を行っている.
抄録全体を表示
-
川瀬 達夫, 染谷 常雄
1985 年 51 巻 470 号 p.
2562-2570
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
変動荷重を受けるジャーナル軸受の油膜圧力分布を回転軸側と軸受側の両方から同時に測定し,従来問題とされていた油膜圧力分布における渦渡的現象の生じる原因を探った.また潤滑油をガス性球形気泡を一様に含んだ気液二相流体として扱い,圧縮性を考慮したレイノルズ方程式を用いて数値解を求め,従来の理論値および実験値と比較した.変動荷重下におけるキャビティの初生,成長の様子を高速度カメラを用いて観察した.
抄録全体を表示
-
山本 雄二
1985 年 51 巻 470 号 p.
2571-2576
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
ころがりーすべり接触における焼付け発生条件を1,2報の焼なまし材,調質材に引き続いて,高硬度の焼入れ材を用いて検討した.その結果,焼付き発生条件は,(1)表面バルク温度,(2)接触の過酷度,(3)表面温度の3点により総合的に判断することによりほぼ妥当な結果が得られることをさらに明確にした.さらに高速,低速両試験片の回転数比(整数か素数か)の焼付きに及ぼす影響についても検討した.
抄録全体を表示
-
三井 純一
1985 年 51 巻 470 号 p.
2577-2585
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
軸受油膜の三次元エネルギ方程式を軸方向の各差分格子線ごとに擬二次元化し,これを漸化式を用いて解いて,油膜内の三次元温度分布を求める方法を示した.また,この方法を真円ジャーナル軸受に適用して油膜内温度分布を求める場合の,油膜の三つの界面における境界条件の計算上の扱い方を含めて,具体的な計算方法と計算例を示した.なお,本計算法においては回転しているジャーナルの熱伝動方程式を解く必要はない.
抄録全体を表示
-
長谷川 英治, 還田 隆, 渡辺 治夫
1985 年 51 巻 470 号 p.
2586-2593
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
粘性流体中での回転する曲った円板の平面壁への押しつけの問題が,流体の慣性と円板の形と遠心力の影響を十分に考慮のうえ解析された.円板の径に比べ円板と壁との間隔は小さいとして,第1,第2近似のレイノルズ方程式が導かれた.それを解いて,円板と壁に働く力とモーメントが間隔の関数として,任意の形の円板の場合に対し求められた.これらの性質が,放射線の形の円板の場合を通じて,明らかにされた.
抄録全体を表示
-
大滝 英征, 石川 義雄
1985 年 51 巻 470 号 p.
2594-2601
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
繊維強化複合材に代表されるように異方性を積極的に利用し等方性材料では得られなかった強度,機能を付与する材料技術が進歩して来ている.それに伴い異方性材料製の機械要素の応力解析を行う必要性が増してきているが,当該分野での研究は少ない.そこで,本報では,直交異方性体の場合の応力関数を導き,軸引張荷重を受けるねじ谷底の応力分布を解析した.
抄録全体を表示
-
塚本 尚久, 丸山 広樹, 石 嘉孫
1985 年 51 巻 470 号 p.
2602-2610
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
動力を伝達するナイロン歯車の運転経時に伴う歯形変化の防止法として前報までに二つの方法を提案し,その効果を実験で確認してきたが,本報ではこれらよりも簡単に行なえる方法としてナイロン歯車を正転位することを提案した.正転位歯車は歯元の歯厚が増し歯がたわみにくくなる反面,歯のすべりが大きくなるので本報では各種の転位係数のもとでナイロン歯車の歯の摩擦などを調べ歯形変化の防止法としてこれが有益な方法であるかを検討した.
抄録全体を表示
-
小田 哲, 小出 隆夫, 安藤 順一
1985 年 51 巻 470 号 p.
2611-2617
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
本論文は,一様および二段変動荷重条件下における軟窒化ローラの面圧強度特性について検討を加えたものである.本実験の硬化層深さの範囲では軟窒化ローラの面圧疲労限度は調質鋼ローラの2倍程度であり,また硬化層深さの増大につれて増加する傾向を示すこと,累積繰返し数比は荷重条件によって大きく変化するため軟窒化ローラの面圧強度設計にマイナーの仮説を直接適用することには問題があることなどが明らかになった.
抄録全体を表示
-
兼田 槙宏, 八塚 裕彦, 村上 敬宜
1985 年 51 巻 470 号 p.
2618-2626
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
潤滑されたころがり接触表面に発生したき裂の応力拡大係数をき裂面の摩擦・侵入した潤滑油の硬化を考慮して体積力法によって求め,非接触疲れき裂の伝ぱに関する実験事実に立脚して,き裂の伝ぱ機構を定量的に明らかにした.その結果,接線力はき裂内への潤滑材の侵入,モードII形伝ぱの結果として起こることなどが判明した.
抄録全体を表示
-
藤本 英雄, 藤井 省三, 牧野 洋一
1985 年 51 巻 470 号 p.
2627-2635
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
多目的満足設計問題の解法として新しい満足化計算法を提案する.それは,許容範囲を満たす解の存在性の判定法および意思決定者との対話情報に基づいた許容範囲の系統的な設定と修正の方法から構成されている.設計問題では,満足化の定式化と満足解のもつ意味が最適化の場合より自然であることが多い.また,本方法により,設計者の対話時における負担および全体の計算量は,多目的最適化の対話形解法におけるより軽減される.
抄録全体を表示
-
築地 恒夫, 山下 務
1985 年 51 巻 470 号 p.
2636-2643
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
A method of analyzing free vibrations of plates with arbitrary shape and boundary conditions is proposed in this report. The procedure presented is based on the Rayleigh-Ritz method using Lagrange multipliers. The deflection of plate is expressed by a double power series of x and y. Since this function, in general, does not satisfy geometrical boundary conditions, the Lagrange multiplier method is applied t fullfil them. The strain and kinetic energies are evaluated by a single integral along the edge of plates. The theoretical values obtained are compared with exact values and test results. The comparison shows that the method proposed is useful to analyze the free vibration of plates with arbitrary shape and boundary conditions.
抄録全体を表示
-
川島 豪, 下郷 太郎
1985 年 51 巻 470 号 p.
2644-2649
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
When a hanging articulated pipe is vertically excited in water, the dynamic behavior of the pipe is analysed as a dynamic problem of a system with parametric excitation and nonlinear damping. Though this system may become unstable under certain input conditions, a response may not diverge due to the fluid drag force being proportional to the squared velocity. In this study, the stability condition and responcse under an instability condition are analysed. A model experiment is also carried out to confirm the theoretical results, a simple equation between the response and the input is derived, and it is confirmed by the model experiment. A model experiment is also carried out t confirm the theoretical results. As a result, a simple equation between the response and the input is derived, and it is confirmed by the model experiment. It is seen that this simple equation if valid for small input nuder the conditions assumed in this study, and the response amplitude is proportional to the input amplitude in the case of the input frequency being twice the natural frequency of the system. In addition, the response amplitude decrease when the input frequency differs from twice the natural frequency.
抄録全体を表示
-
神吉 博, 小田 隆信, 小沢 豊, 川上 孝
1985 年 51 巻 470 号 p.
2650-2654
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
A water-lubricated bearing has the following characteristics : (1) turbulent flow, (2) full film due to high ambient pressure, and (3) large additional mass effect. These characteristics have not yet been fully solved. In this paper, the results are presented on cylindrical bearing characteristics, which are numerically analysed and tested using special test system.
抄録全体を表示
-
天田 重庚
1985 年 51 巻 470 号 p.
2655-2658
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
When an uniform beam is subjected to impulsive-like rotation, equations of motion in the axial and tranverse directions for the beam are derived from Halimton's principle, based on the Euler-Bernoulli hypothesis. By using of a linear elasticity and other assumptions, they are simplified and decoupled. An impulsive-like velocity Q(t) is given by Q(t)=Q
0[1-epx(-ct)] The fundamental equation is transformed into the finite-difference equation and it is numerically analyzed. The dynamic responses of the beam are obtained for the various values of c in the above equation. The variations of the deflection at the beam-tip with respect to time are discussed. The amplitude and period of the cyclic deflection at the beam-tip are obtained for c.
抄録全体を表示
-
岩壺 卓三, 佐渡 守, 川井 良次
1985 年 51 巻 470 号 p.
2659-2662
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
This paper presents a method of the optimum design for journal bearings. That is, the object is to optimize the system in stability at the operational speed, unbalance responce in the vicinity of the rotor critical speed, frictional power-loss, and matufacturing cost of the bearings. The reference function is composed of these four objective elements and it is minimized by both selecting the bearing type and changing bearing diameters, lengths, radial cleavances, and pre-load factors. A simple rotor-bearing model considering the momentum of inertia is analyzed and its reference function is presented. Then optimum bearing type and dimensions of bearings are obtained.
抄録全体を表示
-
藤岡 健彦, 西小野 俊則, 井口 雅一
1985 年 51 巻 470 号 p.
2663-2667
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
The aim of this paper is to analyze the dynamic behavior of a catenary-type overhead wire and a pantograph. Short-period separations between a pantograph and a wire occur frequently at high speed. They cause an electric arc and extensive wear of collectors and wires. A new mathematical model is developed in order to investigate the reasons for these separations and improve the dynamic performance of power collect systems. the wire is modeled using a beam with a tensile force and the pantograph by a multi-body system. The dynamic effects of hangers which suspend a wire discretely are also considered. Periodical contact forces are obtained by the Fourier-series method. The effects of the distance between the hangers and the pantographs are calculated.
抄録全体を表示
-
長松 昭男, 斉藤 俊, 一柳 高時
1985 年 51 巻 470 号 p.
2668-2676
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
Displacement, velocity and acceleration of mechanism of an arbitrary type are analyzed numerically in order to simulate motion of an articulated robot. Uicker's method of analysis, based on the matrix algebra for a link mechanism of a closed loop, is extended to mechanisms of an opened loop and compound loops. How to judge a singular point of motion is explained. On each step of the iterative calculation for convergence by the Newton-Raphson method, a method is proposed to correct the angular displacement of the pairs. It is made clear that he proposed method of correction realizes the analysis of rapid convergence and of high accuracy.
抄録全体を表示
-
長松 昭男, 斉藤 俊, 一柳 高時
1985 年 51 巻 470 号 p.
2677-2683
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
Static and dynamic forces which have to be applied to input pairs of an arbitrary-type mechanism against many kinds of actions are analyzed numerically, in order to simulate motion of an articulated robot. Uicker's method of analysis, based on the matrix algebra for a link mechanism of a closed loop, is extended to mechanisms of an opened loop and compound loops. the static forces necessary to compensate the forces acting from the outside are analyzed by the principle of virtual work. The static and the dynamic forces necessary to compensate the inertial force, the gravity force, the spring force and the damping force are analyzed with Lagrange's equation of motion. The forces of two kinds of the robot model are caluculated numerically by the present method and the results compared. Both results agree well with each other.
抄録全体を表示
-
長松 昭男, 斉藤 俊, 桜井 康雄
1985 年 51 巻 470 号 p.
2684-2690
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
The vibration of link mechanisms of a closed loop, an opened loop and compound loops is analyzed numerically, in order to simulate motion of articulated robots at the design stage. It is assumed that all parts of the mechanisms have linear characteristics against small displacements around the equilibrium positions. First, the equation of motions is composed with the inertia, damping and spring forces calculated in the authors' previous report. The natural frequency, natural mode and transfer function of the link mechanism are analyzed by this equation. Next, the displacement and the stiffness of the hand of the articulated robot are analyzed. The vibration of the actual robot for industry is calculated numerically by the present method under the assumption of structural damping. The damping and stiffness coefficients of each pair are determined by the basic experiment. The caluculated results are compared with the results of the vibration test.
抄録全体を表示
-
鈴木 健彦, 平田 東彦
1985 年 51 巻 470 号 p.
2691-2696
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
The authors developed a practical computer program to calculate the stationary sound pressure level by using wall or machine surface vibration modes and frequencies. This approach is named the method of superposed sound sources. In this paper, we first describe the theoretical background of this method, and next show that the numerical obtained results by this method agree with the experimental or analytical results. We can predict the sound level by using this approach.
抄録全体を表示
-
長安 克芳
1985 年 51 巻 470 号 p.
2697-2701
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
A forced cooling heat exchanger constructed of many fins with slits causes a discrete tone equally-spaced in frequency, depending on the air flow velocity. In order to calculate the natural frequency of the cavity, we made and analytical model, consisting of a main cavity, corresponding to the slits, and additional cavities attached to it at equal intervals, corresponding to the spaces between the fins. The boundary conditions at the branch points are the same pressure for each cavity and flow continuity. Wave equations and the boundary conditions define a difference equation. The frequencies and the modes deduced analytically agreed with experimentally-obtained results. We can predict the tones and silence them by using the analytical results.
抄録全体を表示
-
段野 勝, 朝倉 俊行, 黒瀬 豊敏
1985 年 51 巻 470 号 p.
2702-2706
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
This paper presents preliminary studies on measuring method of torque in the rotating shaft by utilizing the magnetic lattice. The intensity of torque is proportional to the angular twist of the shaft. In this research, the relative angular displacement between two positions on the torsion bar can be detected from the phase difference between two magnetic sinusoidal signals, which are recorded on magnetic tapes winded on those two positions. The torque of the shaft can be calculated from the angular displacement. This method using the magnetic lattice may be possible to measure the torque in the wide range and with high accuracy, comparing with the usual torsion-bar torquemeter. Through experimental studies, it is clarified that the proposed method has sufficient validity to the measurement of torque for the rotating machinary and has the possibility of the practical use.
抄録全体を表示
-
吉本 成香
1985 年 51 巻 470 号 p.
2707-2713
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
A double-row admission gas journal bearing with partially gas-fed slot restrictors is investigated. In this type of bearings, gas flow is mainly restrained by both the viscous resistance in the slot region and the inflow resistance at the inlets of narrow feeding slits. Therefore, the maximum load capacity of this bearing can be obtained easily in a small bearing clearance less than 10μm. Here, influences of various design parameters on the static characteristics are described and the optimum design conditions and the usefulness of this type of bearings are confirmed by comparison with the experimental data.
抄録全体を表示
-
橋本 巨, 和田 稲苗
1985 年 51 巻 470 号 p.
2714-2719
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
In this paper, the effects of fluid inertia forces in annular parallel plates squeeze film bearings lubricated with pseudo-plastic fluids are investigated theoretically. The cubic equation obtained from the empirical flow curves for the pseudo-plastic fluids is used as the relation between shear stress and rate of shear. Approximating the inertia term in the momentum equation by the mean value averaged across the film thickness the film pressures are obtained, and the effects of inertia forces on the films pressures are discussed for various nonlinear factors.
抄録全体を表示
-
小田 哲, 宮近 幸逸
1985 年 51 巻 470 号 p.
2720-2725
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
The true root stresses of internal spur gears with various numbers of teeth and addendum modification coefficients are calculated by two-dimensional elasticity theory and mapping function and the position of critical section on tensile side of internal spur gear tooth is indicated. The stress concentration factors at the position of critical section are calculated under various on the basis of these calculated results. Furthermore the root stresses calculated by this practical formula are compared with those by FEM and measured ones, and the validity of the practical formula is confirmed.
抄録全体を表示
-
廣尾 靖彰, 米倉 将隆, 相浦 正人, 永野 喜三郎
1985 年 51 巻 470 号 p.
2726-2730
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
Some reports have been given on hobbing internal gears. But in all cases, the tooth generation with the hob has not been put in practical use because the problems lay in manufacturing of the hob. So the authors have made research on Spherical hob to solve the problems and succeeded in tooth generation. In this paper, we explain the method of spherical hob manufacturing and hobbing equipment remodeled for internal gear and describe the quality of internal gears. As the results of test hobbing, total profile error was 12μm. The profile did not change even if the hob was shifted or the setting angle of the hob was changed. As for the pitch error, maximum circular pitch individual error was 5 μm and maximum cumulative pitch error was 19 μm. These values mean that the hobbed internal gear has the highest accuracy.
抄録全体を表示
-
堀江 三喜男, 小川 潔, 舟橋 宏明, 阿部 弘
1985 年 51 巻 470 号 p.
2731-2736
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
For the development of mechanical systems of high-speed and high-precision, a dynamic design theory with consideration of bearing clearances which produce a great influence upon the dynamic characteristics of the systems is strongly demanded. About a four-bar mechanism with clearances, the authors have already revealed that the separations between pairing elements can be predicted from an exciting force of a model vibratory system with a mass, spring and dashpot which is derived from equations of motion of mechanisms with clearances. In this paper, about a crank-and-rocker mechanism with clearances, three kinds of restraint methods of separations between pairing elements have been discussed with consideration of the conditions where the above exiting forces decrease or become constant. Especially, in order to obtain mechanisms with good dynamic performances, an optimum design method of the mechanisms with clearances has been discussed to determined directly shapes of moving links instead of their mass parameters.
抄録全体を表示
-
舟橋 宏明, 岩附 信行, 横山 良明
1985 年 51 巻 470 号 p.
2737-2743
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
Crank-length adjusting mechanisms have been proposed in order to change input-output relationships of arbitrary planar, spherical and spatial crack mechanisms and also to stop output motions of crank-and rocker mechanisms during rotations of their crack shafts. Structures of the crack-length adjusting mechanisms have been obtained by a number synthesis, after analyzing the relationships between the crank length and the displacement of a moving pair on the crack in the case where the pair moves along a straight line or an arc fixed on a rotating plane of the crank shaft. Some applications of the mechanisms to adjustable path and function generators have been shown.
抄録全体を表示
-
伊藤 郁男, 小野沢 孝夫
1985 年 51 巻 470 号 p.
2744-2747
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
This scheme and the previous report argued about an intelligent CAD in all processes from a conceptual to a detail design when design specification was imposed only in semantic, and the design of flanged shaft coupling was implemented actually. The equations and tables for calculation were stored in the form of so-called frame, and they should be picked up correctly whenever were retrieved. Some other devices were made upon a method how to specify each shaft for example, when two or more shafts existed, without loosing common character of shaft.
抄録全体を表示
-
山城 光雄, 湯浅 泰伸
1985 年 51 巻 470 号 p.
2748-2752
発行日: 1985/10/25
公開日: 2008/02/21
ジャーナル
フリー
finite waiting space in front of servers, we derive the system size distribution ( the state probability) and the mean number of customers in the system for two servers. Furthermore, a method of diffusion approximation is applied fro solving the system with general independent interarrival time and general service time distributions. Numerical examples for the mean number of customers in the system are given to compare an exact value with an approximate one.
抄録全体を表示