巻号一覧
27 巻 (2001)
- 6 号 p. 257-
- 5 号 p. 219-
- 4 号 p. 181-
- 3 号 p. 137-
- 2 号 p. 89-
- 1 号 p. 1-
27 巻, 4 号
選択された号の論文の4件中1～4を表示しています
- |<
- <
- 1
- >
- >|
-
轟 章, 笹井 正史2001 年 27 巻 4 号 p. 181-187
発行日: 2001/07/15
公開日: 2009/08/11
ジャーナル フリーFor the method to optimize stacking sequences and number of plies of composites, the present paper proposes a new intron method. The intron method is developed from the recessive gene like repair method that is employed for implements of stacking-sequence constraints without causing decrease of the design reliability of GA. The intron method is attempted for the optimizations of laminated cylinders to maximize the buckling load and to minimize the number of plies. As a result, the intron method successfully obtained the real optimal stacking sequences and the number of plies without decrease of design reliabilities.抄録全体を表示PDF形式でダウンロード (2036K) -
伊藤 正義, 井上 浩二, 平山 紀夫, 杉本 雅樹, 瀬口 忠男2001 年 27 巻 4 号 p. 188-193
発行日: 2001/07/15
公開日: 2009/08/11
ジャーナル フリーFRPs, reinforced with carbon fiber, SiC fiber and glass fiber, were prepared by using a new thermosetting polymer containing silicon, poly[(phenylsilylene) ethynylene-1, 3-phenyleneethynylene], as a matrix and the characteristics of the FRPs were investigated. The fobrication process has some advantages, such as no need of solvent, no by-products, and low curing temperature (150-210°C). For the FRPs, high heat-, burn- and radiation-resistant properties were obtained. Bending strengths (110-140 MPa) as well as moduli (30 GPa) at room temperature, 200°C, and 400°C were observed to be almost equal respectively, and no change even at 100 MGy of irradiation. Dynamic viscoelasticity and creep of the FRPs were also measured and compared with those of the FRP with polyimide matrix.抄録全体を表示PDF形式でダウンロード (3441K) -
応答曲面とニューラルネットワークの比較岩崎 篤, 轟 章2001 年 27 巻 4 号 p. 194-200
発行日: 2001/07/15
公開日: 2009/08/11
ジャーナル フリーThe present study employs an electric resistance change method for identifications of delamination cracks. For the method, diagnostic tools for the inverse problems to identify the delamination crack location and size from the electric resistance changes are discussed. FEM analyses are conducted to obtain electric resistance changes due to delamination crack creations with fiveelectrode type specimens. By comparisons of the estimations with the Artificial Neural Networks (ANNs) and with the response surfaces (RS), a better diagnostic tool is discussed in detail. As a result, because of overlearning of neural network, the presumed error of new data with ANNs is large, and the RS using quadratic polynomials is a better tool than ANNs for identifications of delamination crack location and size using electric resistance change.抄録全体を表示PDF形式でダウンロード (2175K) -
足立 廣正, 長谷川 照夫2001 年 27 巻 4 号 p. 201-206
発行日: 2001/07/15
公開日: 2009/08/11
ジャーナル フリーPDF形式でダウンロード (1649K)
- |<
- <
- 1
- >
- >|