Proceedings of JSPE Semestrial Meeting

All issues

2003 JSPE Spring Meeting

Displaying 301-350 of 662 articles from this issue

Download citation

Show all abstracts

Cutting of Single Crystal Silicon Mirrors by Wire Electric-Discharge Machining

Hideo Takino, Kazushi Nomura, Toshimitu Ichinohe, Katsunori Tanimoto, ...

Session ID: G69
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.374.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (479K)

Development of Curved Hole Machining Method (5th Report) - Extension of Curved Hole Length with Improved Device -

Seiichi Kogure, Tohru Ishida, Yoshimi Takeuchi

Session ID: G73
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.376.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (720K)
Development of Curved Hole Machining with Electrochemical Machining (5th Report) -Measurement and Control for Curved Hole-

Mitsuo Uchiyama, Teishirou Shibazaki

Session ID: G74
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.377.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (373K)
The Processing of the Carbide Alloy Material by Dry EDM

yuzhnabo , Jun Takahashi , Nobuhiro Nakajima , Sadao sano , Kohsaku Ka ...

Session ID: G75
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.378.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (583K)
Electrical Discharge Machining with Ultrasonic Vibration

Atsutoshi Hirao, Naotake Mohri, Nagao Saitou

Session ID: G76
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.379.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (120K)
Improvement of Machining Characteristics in Ultrasonic Vibration Aided Dry-EDM

[in Japanese], [in Japanese], [in Japanese], [in Japanese], [in Japane ...

Session ID: G77
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.380.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (100K)

[title in Japanese]

[in Japanese]

Session ID: H01
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.382.0

CONFERENCE PROCEEDINGS FREE ACCESS

Download PDF (30K)
Investigation of Tool Life Improvement through Land Treatment Process on Cutting Edge of Solid Ball End Mill

[in Japanese], [in Japanese], [in Japanese], [in Japanese]

Session ID: H02
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.383.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (397K)
High Speed Milling of Ti-6Al-4V Alloy

Katsuhiko Sekiya, Yasuo Yamane, Norihiko Narutaki

Session ID: H03
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.384.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (522K)
Study on Ultrasonic Milling -7th Report: Finish Surface and Tool Life by Small-Diameter Ball-Nosed End Milling-

Masahiko Jin, Hidenari Kanai, Shin-jiro Yamada, Masao Murakawa

Session ID: H04
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.385.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (115K)

Surface Profile Correction in Wide Spatial Wavelengths Range by Numerically Controlled EEM (Elastic Emission Machining)

Yuzo Mori, Kazuto Yamauchi, Hidekazu Mimura, Akihisa Kubota, Katsuyosi ...

Session ID: H06
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.387.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (84K)
Fabrication of Ultraprecise X-ray Mirror by Plasma CVM and EEM and the Application of the Mirror

Yuzo Mori , Kazuto Yamauchi, Kazuya Yamamura, Hidekazu Mimura, Yasuhis ...

Session ID: H07
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.388.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (709K)
Machining of Ultra High Frequency Quarts Oscillator with Plasma CVM

Masafumi Shibahara, Kazuya Yamamura, Yasuhisa Sano, Yuzou Mori

Session ID: H08
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.389.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (66K)
A Study on Electrochemical Machining Method in Ultrapure Water

Yuzo Mori, Hidekazu Goto, Kikjji Hirose, Yasushi Toma, Itsuki Kobata, ...

Session ID: H09
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.390.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (135K)

Study on Aspherical Polishing by Ultrasonic Vibration

Hirofumi Suzuki, Mitsuo Miyahara, Masako Furuse, Hideo Shibutani, Osam ...

Session ID: H13
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.392.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1080K)
Study on Topography of Axisymmetric Aspherical Ground Surface

Nobuhito Yoshihara, Tsunemoto Kuriyagawa, Katsuo Syoji

Session ID: H14
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.393.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (527K)
Manufacturing of Large-Scale Aspheric Optical Device by using Posture Control Mechanism

[in Japanese], [in Japanese], [in Japanese]

Session ID: H15
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.394.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (199K)
Fabrication of Infrared Optical Elements by Ultra-Precision Cutting of Single Crystal Germanium

[in Japanese], [in Japanese], [in Japanese], [in Japanese]

Session ID: H16
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.395.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (782K)

A New Designed Ultra-High Precision Profiler for SR Mirrors

[in Japanese], [in Japanese], [in Japanese], [in Japanese], [in Japane ...

Session ID: H18
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.397.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (60K)
A New Designed Ultra-High Precision Profiler for SR Mirrors

Yasuo Higashi, Yuzo Mori, Katuyoshi Endo, Takashi Miyawaki, Daisuke Se ...

Session ID: H19
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.398.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (61K)
Development of On-machine Profile Measuring System with Laser-Probe and its Properties

[in Japanese], [in Japanese], [in Japanese], [in Japanese], [in Japane ...

Session ID: H20
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.399.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (62K)
Cylindrical Surface Measurement with On-machine LTP (Long Trace Profilometer)

Sei Moriyasu, Jun-ichi Kato, Weimin Lin, Yutaka Yamagata, Hitoshi Ohmo ...

Session ID: H21
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.400.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (71K)

Development of Fine Finishing Method of the Micro Area using Controlled Abrasive Particles under AC Field.

Yoichi Akagami, Yusuke Takahashi, Takashi Matsumura

Session ID: H31
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.402.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (141K)
Polishing the Inner Wall of a Tiny Nozzle (4th Report)

Hiroshi Sugimori, Toshiji Kurobe

Session ID: H32
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.403.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (108K)
High Speed Flow Finishing of Inner Wall of Stainless Steel Orifice Plate

Keiichiro Yamamoto, Toshiji Kurobe

Session ID: H33
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.404.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (189K)
High Speed Flow Finishing of Inner Wall of Stainless Steel Curved Pipe

Toshiji Kurobe, Akino Moriyoshi

Session ID: H34
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.405.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (176K)

Effect of Magnetic Particle Brush on Finishing Characteristics of Groove by Magnetic Polishing

Hideki Kawakubo, Yuichiro Kitagawa, Yasuhiro Ogiso, Kazuhiro Tsuchiya

Session ID: H36
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.407.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (44K)
Polishing Characterisics of Burned Shell-Ceramics

Hitoshi Nakamura, Katsuo Syoji, Yoshinobu Wakamatsu

Session ID: H37
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.408.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (54K)
Fine Polishing of Silicon Wafer Using 5nm Diamond Grain

Toshiji Kurobe, Tomoyuki Morita, Yoshihiko Ymanaka, Kenichi Hirosaki, ...

Session ID: H38
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.409.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (42K)
Spin Controlled Polishing of Steel Ball Using Electro-phoresis Method

Toshiji Kurobe, Tomoyuki Morita, Kouhei Koori

Session ID: H39
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.410.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (73K)

Machinability Estimation of Fixed Abrasive Tools Containing TiO₂ Powders

Tomotaka Tateishi, Yasuhiro Tani, Kiyoshi Yanagihara, Kenji Kawata, To ...

Session ID: H50
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.412.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (325K)
Processing Characteristic on Mirror Finishing by Alumina Fiber Brush Tool

Keninichi Ishikawa, Hitoshoi Suwabe, Yusuke Tsutae

Session ID: H51
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.413.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (90K)
A Study of the Curved Surface Forming Process by using Lapping Films

Muga Hanada, Shizuichi Higuchi

Session ID: H52
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.414.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (264K)
Studies on Electrorheological Fluid Assisted Polishing of Micro-Aspherical Optic

takeshi takaki, tunemoto kuriyagawa, katuo syoji, tuyoshi kaku

Session ID: H53
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.415.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (53K)
A Proposition of Two Rotating Axes Type Double Sided Lapping Machine

Hitosi Oomori, Wimin Lin, Yosiyuki Ueno, Nobue Ito, Nobunaga Akiyama, ...

Session ID: H54
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.416.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (612K)
Super Smooth Polishing of Sapphire Substrate

Weimin Lin, Hitoshi Ohmori, Yoshiyuki Ueno, Nobuhide Itoh

Session ID: H55
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.417.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (46K)

Dressing of CMP Polisher (2nd Report) - Basic Characteristic in Case of Disc Type Wheel

Masaaki Mochida, Kenichiro Yoshitomi, Atsunobu Une

Session ID: H60
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.419.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (64K)
Ultra-Precision Polishing of Calcium Fluoride Single Crystals for DUV Applications

shinji yoshida, yoshiharu namba

Session ID: H61
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.420.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (246K)
Development of Electropolishing Method of Titanium Matirials (1st Report) -Electrolyte and Electrolytic Conditions-

Takahisa Deguchi, Kunio Chikamori, Kenji Kyo, Akira Ogawa

Session ID: H62
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.421.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (582K)
Ultra-Precision Jet Machining of Brittle Materials

Akihiro Suyama, Daisuke Inoko, Osamu Horiuchi, Hirofumi Suzuki, Hideo ...

Session ID: H63
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.422.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (584K)
Studies on Abrasive Jet Machining

ayumu narita, tsunemoto kuriyagawa, katsuo syoji, yuya yasutomi

Session ID: H64
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.423.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (57K)

Ultraprecision Cutting of Plastics by Applying Ultrasonic Elliptical Vibration Cutting

Eiji Shamoto, YoungChan Song, Yoshitaka Iguchi, Toshimichi Moriwaki

Session ID: H66
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.425.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (462K)
Development of the Ultra-Precision Lathe for Lens Dies without Polishing - Abstract of the System and Tuning

[in Japanese], [in Japanese], [in Japanese], [in Japanese]

Session ID: H67
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.426.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (158K)
Development of the Ultra-Precision Lathe for Lens Dies without Polishing. -Apply for Brittle Material-

[in Japanese], [in Japanese], [in Japanese], [in Japanese]

Session ID: H68
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.427.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (306K)
The Development of Light Guiding Plate Die & Mold Processing System for LCD

Masahiko Fukui, Toshihiro Mita, Mitsuharu Matsuzawa, Morikazu Ishihara

Session ID: H69
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.428.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (62K)

Tool Path Generation for 5-Axis Control Machining by Means of C-Space- Application to Machining of Closed Impeller -

Tomoyasu Kobata, Kouichi Morishige, Yoshimi Takeuchi

Session ID: H73
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.430.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (267K)
The Proposal of the New Solution and Algorithm for 5 Axis Control Machining

Kazuo Muto

Session ID: H74
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.431.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (149K)
Sculpture Surface Machining Method with Tool Orientation Control on 5-Axis Machine Tools. (Part 3)

Makoto Yamada, Fumiki Tanaka, Takeshi Kishinami, Akio Koumura

Session ID: H75
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.432.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (969K)
5 Axis Machine Tool intelligence and Direct Machining by Intellectual Control

Muto Kazuo , Zhu LiuCun , Oba Shigeru , Sigimori Tadasi

Session ID: H76
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.433.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (102K)
5Axis Machining Control & Simulation with XVL CAD Format

Kazuo Muto, Takeshi Nabeta, Sigeru Oba

Session ID: H77
Published: March 26, 2003
Released on J-STAGE: March 01, 2005

DOIhttps://doi.org/10.11522/pscjspe.2003S.0.434.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (61K)

Register with J-STAGE for free!