Proceedings of JSPE Semestrial Meeting

Browse

Search
Browse

All issues

2013 JSPE Spring Conference

Displaying 1-50 of 556 articles from this issue

Download citation

Show all abstracts

[title in Japanese]

Shinya Suzuki, Kazuhide Kamiya, Ken-ichi Iwatsuka, Yukio Maeda, Takash ...

Session ID: A01
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.1.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (547K)
Two-dimensional analysis of modulated grating by the two-step Fourier transform method

Comparison of methods to eliminate a background noise from grating image

Ami Tanbo, Takashi Nomura, Kazuhide Kamiya, Kimihisa Matsumoto, Hatsuz ...

Session ID: A02
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.3.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (488K)
Optimum Wavelength Selection for the Three-Wavelength Interferometry

Katsuichi Kitagawa

Session ID: A03
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.5.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

This paper presents a novel method for selecting optimum measurement wavelengths in multi-wavelength interferometry. It is based on a coincidence error analysis in exact fractions solutions. By this method, three wavelengths of 470, 560, and 600 nm were selected. With these wavelengths, an extended measurement range of 8 microns was experimentally proved.

View full abstract

Download PDF (816K)
Spatial fringe analysis method based on Fourier transform technology by using only two speckle patterns for electronic speckle pattern interferometry

Yasuhiko Arai, Shunsuke Yokozeki

Session ID: A05
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.7.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Electronic speckle pattern interferometry with high resolution power based on Fourier transform using only two speckle patterns is proposed by using the new optical system. Furthermore, the occurrence process of unresolved speckle in speckle pattern which is grabbed by the optical system is also discussed. The condition that can avoid the occurrence of unresolved speckles for the fringe analysis is proposed. In experiments, the measuring accuracy of the method is improved in the measurement of out-of-plane deformation by rotating a flat plane using the shift of the information in frequency domain. It is confirmed that the accuracy of the method is higher than 1/130 wavelength of light source and that the out-of-plane deformation with a concave phase distribution can be also measured.

View full abstract

Download PDF (634K)
Measurement of Dynamic Deformation by Color Fringe Projection

Hideo Sakuma

Session ID: A06
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.9.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Fringe phase is detectable from one-shot image in color fringe projection, since three-primary-colors intensity information can be used from an image independently. Measurement of dynamic deforming object is carried out by using this method. Vibration mode analysis is performed by the time-average method of projected monochromatic grating pattern, which is similar to holographic interferometry. However it is difficult to analyze sub-fringe by those techniques because only a vibrating fringe pattern is captured. Hue information of time-averaged color fringe is applied in this experiment to analyze the fringe phase precisely. Proposed method where the hue of projected fringe is modified by oscillation is compared with ordinary technique where the fringe intensity is modified.

View full abstract

Download PDF (557K)
[title in Japanese]

Shuhei Shibata, Takashi Oonuma, Yukitoshi Otani

Session ID: A07
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.11.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (705K)
Imaging Stokes polarimeter for texture evolution of Japanese lacquer

Ryota Mizutani, Tomoharu Ishikawa, Miyoshi Ayama, Yukitoshi Otani

Session ID: A08
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.13.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (855K)
Uni-axial inner profile measurement

Toshitaka Wakayama, Toru Yoshizawa

Session ID: A13
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.15.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (565K)
Development of three-dimensional biometrics scanner

Kota Takahashi, Toshitaka Wakayama, Toru Yoshizawa

Session ID: A14
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.17.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (517K)
Measurement of Half Cells for Superconductive Accelerator Cavity

Cell measurement

Kazuhiro Enami, Tatsuya Kume, Yasuo Higashi, Masashi Yamanaka

Session ID: A15
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.19.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (489K)
Accuracy of the surface profile measuring by the laser displacement sensor using the triangulation method

Tatsuki Otsubo, Takanori Yazawa, Yukio Maeda, Keita Fujii, Hiroyuki Ki ...

Session ID: A16
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.21.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (590K)
[title in Japanese]

Miyuki Takaki, Yu Yoshida, Hiroyuki Narahara, Hiroshi Koresawa, Hirosh ...

Session ID: A18
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.23.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (529K)
Development of first production flaw detecting system for on demand repair

Ichiro Ogura, Hidalgo Caballero Eduardo, Kiwamu Ashida, Jun Akedo

Session ID: A19
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.25.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (392K)
[title in Japanese]

Shinya Suzuki, Shin Kitajo, Kazuhide Kamiya, Ken-ichi Iwatsuka, Yukio ...

Session ID: A20
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.27.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (595K)
Development of next-generation three-dimensional navigation system for replacement arthroplasty

Toshitaka Wakayama, Yuichi Hirose, Takashi Handa, Yoshihisa Kamakura, ...

Session ID: A21
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.29.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (372K)
Microfabrication of Three-Dimensional Structure with Photocatalyst Nanoparticles

Hisamichi Yoshigoe, Yasuhito Mukai, Satoru Takahashi, Kiyoshi Takamasu

Session ID: A23
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.31.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (602K)
[title in Japanese]

Takahiro Sekino, Satoru Takahashi, Kiyoshi Takamasu

Session ID: A24
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.33.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (869K)
[title in Japanese]

Yuki Nagata, Yasuhiro Mizutani, Tetsuo Iwata, Yukitoshi Otani

Session ID: A25
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.35.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (399K)
[title in Japanese]

Yuichi Kanamori, Yukitoshi Otani

Session ID: A26
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.37.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1004K)
[title in Japanese]

Hisae Shibuya

Session ID: A31
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.39.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (776K)
An Autonomous Vehicle Controlled by Stereo Robot Vision System using Two-Layer LCD

Yoshito Yabuta

Session ID: A32
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.41.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Stereo robot vision system achieve stereopsis by using two cameras. To solve the correspondence problem between right and left images, we proposed a pattern matching technology and applied the technology to a stereovision system. The proposed pattern matching technology employs a liquid crystal display (LCD) and utilizes the polarization of light. We use the LCD function of controlling light penetration for our pattern matching. We use two LCDs arranged in piles. The image from each camera is displayed on one of the LCDs; the correspondence between the two images is then judged by the light intensity through the two-layer LCD. Using this two-layer LCD, correspondence between extracted objects in right and left images is roughly obtained, and the computational costs for the pattern machining can be reduced. To confirm the effectiveness of the proposed technology, the stereo camera was mounted on a remote-control model car, and an experiment was conducted for autonomous mobile robot. Obstacles in front of the autonomous mobile robot obtained from the stereo camera were extracted and displayed on the two-layer LCD, and the distances to the obstacles were calculated through triangulation.

View full abstract

Download PDF (908K)
Development of a subtraction stereo camera

Masatoshi Shibata, Takafumi Wakimoto, Takehiro Kawashita, Kazunori Ume ...

Session ID: A33
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.43.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (523K)
[title in Japanese]

Shun Miyazaki, Hidenori Takauji

Session ID: A34
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.45.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (476K)
Calibration of Camera-Projector System Using Geometrical Invariants on the Calibration Board

Tsuyoshi Shimizu, Shinji Kotani, Hiromi Watanabe, Tsutomu Tanzawa, Nob ...

Session ID: A36
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.47.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (881K)
Development of Simplified Type Image Measuring System to Measure the Black Bearing Number on the Scraped Surface Plate

Hirotaka Tsutsumi, Takato Yamagishi, Hiromi Isobe, Katsumi Fukuda

Session ID: A37
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.49.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Automatic visual measuring system for bearings number and bearing area proportion on the scraped surface was developed. The linear type light and linear CCD line sensor was used to recognize the scraped surface. Therefore non-uniform illumination on the target surface were reduced. The threshold value to obtain binary image was decided correspond to bearing number and bearing area proportion. Then, Red lead and blue pest were painted in fitting work with another surface to obtain the high contrast image in manually. As a result, developed system was some advantages at high speed and high precious measuring comparison with the conventional method.

View full abstract

Download PDF (501K)
Study on Development of On-Machine 3D Measuring System of Grinding Wheel Surface Topography by Binocular Stereopsis

Hidetaka Noguchi, Takuya Nagayama, Hirotaka Ojima, Teppei Onuki, Jun S ...

Session ID: A38
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.51.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (622K)
Development of a walk supporting machine for a blind person in a pedestrian crossing

Takuya Asami, Okitoshi Tsunoda

Session ID: A39
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.53.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (515K)
Validation of rough machining process for Multi-axis Machine Tools by using multi-resolution mesh

Masaomi Hasegawa, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito

Session ID: A61
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.55.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (384K)
Fast Cutter Workpiece Engagement Estimation Method for Prediction of Instantaneous Cutting Force in Continuous Multi-Axis Controlled Machining

Junichi Kaneko, Kenichiro Horio

Session ID: A62
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.57.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1222K)
Blade Machining in Whirling Cut

Takashi Matsumura, Masaki Serizawa

Session ID: A63
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.59.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (321K)
[title in Japanese]

Eri Takise, Makoto Yamada

Session ID: A64
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.61.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (619K)
[title in Japanese]

Yurie Okugawa, Naoki Asakawa, Masato Okada

Session ID: A66
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.63.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (565K)
[title in Japanese]

Yusuke Ota, Soichi Ibaraki

Session ID: A67
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.65.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (527K)
[title in Japanese]

Norikatsu Maeshima, Yuki Arai, Masaomi Tsutsumi, Ken Kobayashi

Session ID: A68
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.67.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (678K)
[title in Japanese]

Masahiro Hagino, Megumi Kato, Takashi Inoue

Session ID: B05
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.69.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (392K)
[title in Japanese]

Masahiro Hagino, Megumi Kato, Takashi Inoue

Session ID: B06
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.71.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (313K)
Influence of carbon fiber direction on end milling of CFRP

Tasuku Higaino, Tojiro Aoyama, Hitoshi Ogawa

Session ID: B07
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.73.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (632K)
[title in Japanese]

Yohei Yamada, Hiroyuki Sasahara, Nobuyuki Osumi, Akio Takasugi

Session ID: B08
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.75.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (550K)
Drilling of CFRP by Core Electrodeposited Diamond Drill

Behavior of Cutting Force and Core of Workpiece

Ryutaro Tanaka, Yuta Sakaguchi, Katsuhiko Sekiya, Keiji Yamada, Yasuo ...

Session ID: B14
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.77.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (656K)
Control of Built-up Edge Behavior by Optimization of Cutting Tool Edge Geometry and Surface Modification for Prevention of Tool Wear

Hiroki Kiyota, Fumihiro Itoigawa, Yu Hasegawa, Takayoshi Wakabayashi, ...

Session ID: B15
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.79.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (440K)
Development of a Highly-Functional Cutting Tool with Micro-Textured Surface

Suppressing flank wear

Tatsuya Sugihara, Toshiyuki Enomoto

Session ID: B16
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.81.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (715K)
Development of the temperature-electromotive force calibration apparatus for micro-thermocouples fabricated on an indexable insert

Junichi Harashita, Jun Shinozuka

Session ID: B17
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.83.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (704K)
Possibility of self-sharpening tool for CFRP cutting by wear controlling

Observation of tool edge blunting process and clarification of influential factor

Yuta Morikawa, Kenta Tominaga, Satoru Maegawa, Fumihiro Itoigawa, Shin ...

Session ID: B19
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.85.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (493K)
A fundamental study on self-sharpening of cutting tool edges in CFRP machining

Satoru Maegawa, Shinya Hayakawa, Fumihiro Itoigawa, Takashi Nakamura

Session ID: B20
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.87.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1081K)
[title in Japanese]

Naoki Kato, Kazuhito Nishimura, Hideki Sasaoka, Yuko Aono, Hitoshi Tok ...

Session ID: B21
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.89.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (535K)
[title in Japanese]

Daisuke Ishimaru, Takeshi Sakamoto, Daisuke Matsunaga, Akihiro Kanzaki ...

Session ID: B22
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.91.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (596K)
[title in Japanese]

Takeshi Hatta, Atsushi Sugino, Hiroaki Yoshida, Fumihiro Itoigawa

Session ID: B35
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.93.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (481K)
Studies on MQL Turning of Difficult-to-Machine Materials with Actively Driven Rotary Tool

Effect of Water Soluble Oils and Consideration of Optimum Tool Rotational Speed

Kengo Muramatsu, Yusuke Gensai, Akira Hosokawa, Takashi Ueda, Tatsuaki ...

Session ID: B36
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.95.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

The cutting characteristics of the actively driven rotary lathe tool are investigated. The MQL external turning tests of SUS 304 and Inconel718 are carried out with some kinds of cutting fluids, in which the effect of water soluble oil on tool temperature and tool wear are mainly examined. The optimum toll rotational speed is also investigated based on both tool temperature and cutting forces.

View full abstract

Download PDF (569K)
[title in Japanese]

Kazuhiro Shintani, Yusaku Omori, Akihiko Ikegaya, Shigekazu Yamazaki, ...

Session ID: B37
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.97.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (591K)
Precision Cutting of Sintered Carbide Using Polycrystalline Diamond End Mill

Takeshi Watanabe, Takashi Goto, Masahiko Jin

Session ID: B38
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.99.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (956K)

feedback

Top

Register with J-STAGE for free!