Proceedings of JSPE Semestrial Meeting

Browse

Search
Browse

All issues

2013 JSPE Autumn Conference

Displaying 1-50 of 493 articles from this issue

Download citation

Show all abstracts

Identification of Dynamic Cutting Force Coefficients by Shaper Cutting

Hiraku Sugiura, Daisuke Kono, Iwao Yamaji, Atsushi Matsubara

Session ID: A01
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.1.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

It is necessary to estimate the cutting force accurately in order to predict chatter vibrations. In this research, dynamic cutting force coefficients are obtained from shaper cutting experiments. The depth of cut is varied periodically either by tool oscillation or by cutting a wavy workpiece. The experiments show that the dynamic cutting force direction is different from the static one. The phase lead of the main cutting force to the chip thickness variation becomes larger as the average depth of cut is increased or as the wave length is shortened when cutting a wavy workpiece without tool oscillation.

View full abstract

Download PDF (274K)
Estimation of modal parameters of the machine tool by using the characteristics of chatter vibration

Hideki Shibahara, Mikito Kumagai, Kenji Ohnishi

Session ID: A02
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.3.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (685K)
Performance Index for Tool path based on Energy Consumption of Feed Drive System

Akio Hayashi, Yuta Inoue, Ryuta Sato, Keiichi Shirase

Session ID: A03
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.5.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (462K)
Influence of Coupled Vibration of Machine Structure and Feed Drive Systems to High Speed Tracking Motion Error

Gen Tashiro, Ryuta Sato, Keiichi Shirase

Session ID: A04
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.7.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (680K)
[title in Japanese]

Hideki Iwai, Yuji Sasaki, Yasumasa Sakurai, Yoshio Wakazono

Session ID: A06
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.9.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (522K)
Development of turning techniques for three-dimensional surface by linear motor driven CNC lathe

High precision turning by dynamic response improvement of tool post

Katsuhiro Nakagaki, Yoshitaka Morimoto, Naohiko Suzuki, Yoshiyuki Kane ...

Session ID: A07
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.11.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (430K)
Development of Grinding Spindle Equipped with Linear Reciprocating Motion

Ayumu Honda, Takayuki Kitajima, Akinori Yui

Session ID: A08
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.13.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (521K)
A Novel Diaphragm-Controlled Restrictor for Precision Hydrostatic-Bearing Spindle

Hiroshi Mizumoto, Terushi Fujii, Kou Matsumoto, Kazufumi Murakami

Session ID: A09
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.15.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

A novel diaphragm-control restrictor (DCR) is proposed for improving the performance of the hydrostatic-bearing spindle used in the precision grinding machine. Unique functions of the proposed DCR is its adjustability for the restrictor characteristic. By changing the restrictor resistance of the DCR, the effect of the active control can be altered. The proposed DCR is incorporated into hydrostatic radial bearings of the work spindle of the precision grinding machine, then the static and dynamic performances of the spindle are analyzed. The results of the analyses show that the static stiffness of the spindle can be incresed to be infinite, and the dynamic compliance shows that the effect of the active control can be observed up to 20Hz. These results show that the proposed DCR is useful for improving the performance of the hydrostatic-bearing spindle in the precision applications.

View full abstract

Download PDF (781K)
Method for changing the stiffness of machine tool supports

Shinya Imayasu, Daisuke Kono, Atsushi Matsubara, Iwao Yamaji

Session ID: A13
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.17.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

The stiffness at contacted interface has a large influence on the stiffness of machine tool supports. In this research, two methods are attempted to change the stiffness of the support by changing the contact stiffness. One is to tilt the interface and the other is to insert thin foils between the interfaces. The stiffness of the support was decreased by 50% with the interface tilted by 45 degrees. The stiffness of the support tended to increase with inserts of aluminum foil and tin foil.

View full abstract

Download PDF (546K)
[title in Japanese]

Shuya Nishio, Daisuke Kono, Atsushi Matsubara, Iwao Yamaji

Session ID: A14
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.19.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (343K)
Estimating the parameter of error compensating model by measuring the reference shapes for the three axis machine tool

Kenji Tokumoto, Fumiki Tanaka, Masahiko Onosato

Session ID: A15
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.21.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (549K)
Measurement of positioning accuracy of machine tools by using image matching

Akinori Saito, Atsushi Suzuki, Toshiki Yaginuma, Ryousuke Sato

Session ID: A16
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.23.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (407K)
[title in Japanese]

Toru Tajima, Masahito Saito, Tomohiro Kubo, Yukitoshi Ihara

Session ID: A17
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.25.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (407K)
[title in Japanese]

Hiroshi Ueno

Session ID: A20
Published: 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.27.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (667K)
Development of high precision on-machine measurement unit for ultra-precision machine tool

Tomohiro Hirose, Yoshihiro Kami, Makoto Yabuya

Session ID: A22
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.29.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (364K)
Study on accuracy of deformation analysis for bolted joint considering bolt threads

Shinji Simizu, Hiroaki Kurihara, Haruhisa Sakamoto

Session ID: A23
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.31.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (740K)
Trial making of profile simulator of roughness surface

Kyoko Nakamura

Session ID: A24
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.33.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (658K)
Motion Characteristic of Liner Axes and a Rotary Axis under Constant Feed Speed Vector at Milling Point with a Five-Axis Machining Center

Yuma Maruyama, Takayuki Akai, Toshiki Hirogaki, Eiichi Aoyama, Keiji O ...

Session ID: A25
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.35.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (685K)
[title in Japanese]

Yuto Miyata, Shinichi Warisawa, Sunao Ishihara, Reo Kometani

Session ID: A44
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.37.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (565K)
Surface microstructures fabricated by silicon anisotropic wet etching

Seigi Shimizu, Sunao Murakami, Takahiro Ito

Session ID: A45
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.39.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (362K)
[title in Japanese]

Kazuki Moriya, Shinnichi Warisawa, Sunao Ishihara, Reo Kometani

Session ID: A46
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.41.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (591K)
Design factor Optimization of Blood Extraction Pump with a Shape Memory Alloy

Shigetaka Asakura, Kazuyoshi Tsuchiya

Session ID: A47
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.43.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (480K)
Development of a micro pin array filter utilized extra fine wires (3rd Report)

Satoshi Honda

Session ID: A48
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.45.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (779K)
[title in Japanese]

Hidekuni Takao

Session ID: A61
Published: 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.47.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1913K)
Strength evaluation of mosquito′s needle by micro tension testing machine

Ken Nakao, Syuntei Ou, Tomokazu Takahashi, Masato Suzuki, Seizi Aoyagi ...

Session ID: A65
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.49.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (889K)
Proposal and evaluation of guide structure to prevent buckling of micro needle imitating mosquito′s labium

Masashi Ogura, Yoshihiko Terada, Tomokazu Takahashi, Masato Suzuki, Se ...

Session ID: A66
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.51.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (732K)
Research and development of vascular anastomosis apparatus used in microsurgery

Toshinari Shiroma, Yuichi Nakazato

Session ID: A67
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.53.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (514K)
Study on The Peristaltic Movement Type Active Cathter

2nd Report, Development of The Mechanism to Respond to a Blood Flow

Kazuki Kawanaka, Yuuta Kato, Takuya Nozawa, Yuichi Nakazato, Shigeki T ...

Session ID: A68
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.55.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (838K)
Research and Development of a Right-and-Left 2-Arms Micromanipulator System for Microobjects

Mikio Horie

Session ID: A69
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.57.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (595K)
Development of non-contact precision measurement technique by using optical frequency comb

decrease of cyclic error with two optical frequency combs

Taro Onoe, Satoru Takahashi, Kiyoshi Takamasu, Hirokazu Matsumoto

Session ID: B05
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.59.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (565K)
Optical Comb Fiber Interferometer for Correcting the Refractive Index of Air

Hirokazu Matsumot, Xiaonan Wang, Kiyoshi Takamasu

Session ID: B06
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.61.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (410K)
Length measurement using adjacent pulse repetition interval length of femtosecond optical frequency comb (1st report)

Accuracy evaluation of length measurement by using adjacent pulse repetition interval length

Dong Wei, Kiyoshi Takamasu, Hirokazu Matsumoto, Masato Aketagawa

Session ID: B07
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.63.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (421K)
[title in Japanese]

Tatsumi Ito, Takato Yamagishi, Yasuhiro Sakai, Masato Aketagawa, Dong ...

Session ID: B08
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.65.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (916K)
Diameter measurement of a microsphere using WGM resonances(1st report)

Influence of coupling conditions to resonance peaks

Atsushi Adachi, Masaki Michihata, Terutake Hayashi, Yasuhiro Takaya

Session ID: B14
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.67.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (490K)
Robust defocus estimation for fast 3D microscopic measurement

Yojiro Mandachi, Shin Usuki, Kenjiro T. Miura

Session ID: B15
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.69.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (705K)
Super-Resolution Optical Inspection Using Overlapping Shift of Spot Illumination

Theoretical Analysis of Super-Resolution Characteristics

Hiroki Yokozeki, Ryota Kudo, Satoru Takahashi, Kiyoshi Takamasu

Session ID: B16
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.71.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (551K)
Visualization for Minute Refractive Index Change of Micro Flow by Light Interferometer based on Stochastic Resonance (1st report)

- Verification of Measuring Principle -

Phong Dang Tran, Masaki Michihata, Terutake Hayashi, Yasuhiro Takaya

Session ID: B17
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.73.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (781K)
Level based on intensity changes of reflection and transmission lights for optical prism using mirror multi-reflections

Yusaku Nishimori, Tomohito Morikawa, Masato Aketagawa, Dong Wei, Kazuh ...

Session ID: B20
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.75.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (710K)
Nanometer Profile Measurement on Large Aspheric Optical Surface (9^th Report)

The development of autocollimator with wide measurement range

Kyohei Ishikawa, Tomohiko Takamura, Muzheng Xiao, Satoru Takahashi, Ki ...

Session ID: B21
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.77.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

High accuracy aspheric mirrors and lenses with large dimension are widely used in the huge telescopes and other industry filed. But measuring method of large aspheric optical surface isn′t confirmed. The goal of our research is to measure the profile of large aspheric optical surface with accuracy of about 50 nm. We developed the autocollimator with CMOS as light receive element (CMOS type AC).The autocollimator′s measuring range is wide. In this report, we developed LED-CMOS type AC whose light source is LED. And we proposed the angle sensor which can measure small curvature radius by using light ray trace simulation.

View full abstract

Download PDF (641K)
Profile measurement using a gyro

Drift elimination of the gyro

Tatsuya Kume, Eiki Okuyama, Masanori Satoh, Tsuyoshi Suwada, Kazuro Fu ...

Session ID: B22
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.79.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

We had applied profile measurement using an inclinometer for evaluating the alignment of our linear particle accelerator for a distance up to 206 m and demonstrated that profile measurement based on angle detection is valid for precise evaluation of longer profile. Here, we consider a method using a gyro for detecting angles in place of the inclinometer for applying it in horizontal plane. We investigate for eliminating drift of the gyro, which is considered to be the major factor for errors.

View full abstract

Download PDF (381K)
Concurrent measurement of radial, axial and angular motions of spindle using concentric circle grating interferometers

6th report: Construction of made compact and rigid interferometers

Takuya Kumagai, Madden Muhummad, Yoshitaka Maeda, Yuki Nakatani, Masat ...

Session ID: B23
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.81.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

The purpose of this study is to measure a spindle error motions with 5 degree of freedom (DOF), concurrently. An ideal spindle must have only rotational motion with 1 DOF, therefore another motions with 5 DOF (= radial motions (2DOF) + axial motion (1DOF) + angular motions (2DOF)) are parasitic and unnecessary errors for spindles. In previous article, we measured a spindle motion for 2 DOF by using a concentric circle grating which is fixed on the spindle top and an optical sensor which can obtain 2 axes displacements. In this report, we made a compact and rigid optical sensor and checked its performance.

View full abstract

Download PDF (596K)
Development of operation interface for malti-axis controlled machine tool using Haptic Device

Real time smoothing of tool path

Shunya Sasaki, Koichi Morishige

Session ID: B31
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.83.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (566K)
[title in Japanese]

Kazunori Sakurai, Koichi Morishige

Session ID: B32
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.85.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (429K)
Development of tool path generation lower calculation cost

Simplifying of 3D model by QEM method

Ryota Kito, Keigo Takasugi, Naoki Asakawa, Masato Okada

Session ID: B33
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.87.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (588K)
Development of hi-speed and hi-accuracy multi-axis machining system based on predictive error compensation

- concept of basic system-

Mikio Fujio, Hiroshi Suzuki

Session ID: B34
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.89.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

The purpose of this research is to develop hi-speed and hi-accuracy multi-axis machining system. We proposed two methods and adapted them to 3 axis machining. One is geometric interpolation and the other is predictive error compensation. It is evident that two methods are able to realize hi-accuracy and hi-speed 3-axis machining. This report refers to the concept of basic system which is multi-axis machining system based on these method.

View full abstract

Download PDF (489K)
Sensor-less cutting force estimation in ball screw driven stage using full-closed control

Yuki Yamada, Yasuhiro Kakinuma, Tojiro Aoyama

Session ID: B37
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.91.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

In this research, we proposed a wide band cutting force estimation method in ball screw driven stage using full-closed control. To estimate cutting force, servo information of the drive system such as motor current reference, motor rotation angle, and also stage position response is used. Simulation result indicates that the proposed method enables to estimate accurately around resonance frequency of the ball screw in an axial direction. From the experimental results in milling process under acceleration/deceleration of the stage, it is confirmed that cutting force is estimated depending on tooth pass frequency without the influence of acceleration/deceleration of the stage.

View full abstract

Download PDF (816K)
Development of CAM System for Non-Axisymmetric Curved Surface Turning

Keigo Takasugi, Yoshitaka Morimoto, Katsuhiro Nakagaki, Yoshiyuki Kane ...

Session ID: B38
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.93.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (590K)
Motion accuracy measurement device for 5-axis machining center with three displacement sensors

Masashi Yamaji, Naoki Hamabata, Yukitoshi Ihara

Session ID: B44
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.95.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (508K)
A Study on Modeling and Analysis of Kinematic Motion Deviation of Five-Axis Machine Tools

Arata Yoshida, Atsushi Takahashi, Wiroj Thasana, Nobuhiro Sugimura, Yo ...

Session ID: B45
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.97.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (610K)
Definition method of guideway error on the components in five-axis machining center

Shigehiko Sakamoto, Ren Tanaka, Fukuhito Nagata

Session ID: B46
Published: August 28, 2013
Released on J-STAGE: February 28, 2014

DOIhttps://doi.org/10.11522/pscjspe.2013A.0.99.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (553K)

feedback

Top

Register with J-STAGE for free!