Proceedings of JSPE Semestrial Meeting

Browse

Search
Browse

All issues

2017 JSPE Autumn Conference

Displaying 251-300 of 503 articles from this issue

Download citation

Show all abstracts

Comparison of Glass Polishing Properties between Ceria Abrasives without and with La Doping

Koichi Kawahara, Masaya Suzuki, Seiichi Suda

Session ID: G67
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_501

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (915K)
[title in Japanese]

Ken Emori, Yuji Okubo, Katsutoshi Endo, Hideaki Yamada, Akiyoshi Chaya ...

Session ID: G68
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_503

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (560K)
Basic study of high efficiency polishing with a small tool using the slurry controlled by AC electric field

2nd report

Takayuki Kusumi, Masami Echigoya, Ryuta Nakamura, Yoichi Akagami

Session ID: G69
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_505

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

In polishing of aspherical lens shape or a large diameter reflecting mirror such as astronomicalobservatory, 'a small tool' is used, which is smaller than the workpiece.Since small tools have low polishing efficiency, we propose a novel polishing method that leada to enhanced removal rate using AC electric field.In this paper, we describe the results for the basical polishing test for silicone wafer with the small tool using the slurry controlled by AC electric field.

View full abstract

Download PDF (592K)
[title in Japanese]

Hiroki Matsumoto, Yuki Shinozaki, Kazuto Saito, Hiroshi Masuda

Session ID: H02
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_507

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (694K)
[title in Japanese]

Ryota Moritani, Satoshi Kanai, Hiroaki Date, Masahiro Watanabe, Takahi ...

Session ID: H03
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_509

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1144K)
Estimating the Beam Spot Diameter of Terrestrial Laser Scanner from Target Image with Circular Hole

Ichiro Tanaka, Hiroshi Masuda

Session ID: H04
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_511

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (534K)
Development of Tools and Technologies for Supporting the Multi Organization Utilization of Point Cloud Data

Yushi Sakamoto, Hiroyuki Terunuma, Hiroshi Seki, Yoshihito Satou

Session ID: H06
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_513

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1112K)
[title in Japanese]

Yoshitaka Midorikawa, Kazuto Saito, Hiroshi Masuda

Session ID: H07
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_515

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (602K)
[title in Japanese]

Takuya Suzuki, Tomohiro Mizoguchi

Session ID: H08
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_517

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1163K)
[title in Japanese]

Yuya Hashimoto, Tomohiro Mizoguchi

Session ID: H09
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_519

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1087K)
[title in Japanese]

Motoaki Hashikawa, Satoshi Kanai, Hiroaki Date

Session ID: H13
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_521

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (984K)
[title in Japanese]

Nanami Mizuguchi, Yoshitaka Midorikawa, Keisuke Kohira, Hiroshi Masuda

Session ID: H14
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_523

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (542K)
[title in Japanese]

Yuki Shinozaki, Keisuke Kohira, Hiroshi Masuda

Session ID: H15
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_525

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (595K)
[title in Japanese]

Takahiro Sanpei, Tomohiro Mizoguchi

Session ID: H16
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_527

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1060K)
A bridge information model based on International standards and a web contents providing system for bridge inspection and maintenance (6th Report)

Applying bridge information model to asset management

Fumiki Tanaka, Yoshiro Hada, Manabu Nakao, Hiroki Kobayashi, Eiji Hase ...

Session ID: H18
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_529

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (944K)
Classification of road-side objects using Point Clouds and Images from Mobile Mapping Systems

Yuma Mori, Hiroshi Masuda

Session ID: H19
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_531

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (768K)
Curb-Cut Detection from Mobile Mapping Data for Autonomous Driving

Daisuke Kubo, Kiichiro Ishikawa, Yoshiharu Amano

Session ID: H20
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_533

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (962K)
[title in Japanese]

Hiroshi Ishibashi, Kazuto Saito, Hiroshi Masuda

Session ID: H21
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_535

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (541K)
[title in Japanese]

Daisuke Tatsumoto, Satoshi Watanabe, Hiroyuki Kodama, Kazuhito Ohashi

Session ID: H23
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_537

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (676K)
[title in Japanese]

Hiroki Saito, Nobuhide Itoh, Kazuki Shimizu, Hitoshi Ohmori, Teruko Ka ...

Session ID: H24
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_539

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (623K)
[title in Japanese]

Daisuke Yoshii, Minoru Ota, Kai Egashira, Keishi Yamaguchi

Session ID: H25
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_541

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (879K)
The influence of the temperature inside the wheel cover on the shrinkage of grinding Wheel

Takekazu Sawa, Syusuke Sekine

Session ID: H26
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_543

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (729K)
[title in Japanese]

Takashi Ito, Hidetake Tanaka, Tatsuki Ikari, Haruhisa Sakamoto

Session ID: H32
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_545

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (875K)
Development of Highly Functional Structure with 3D Metal Additive Manufacturing

Proposal of Creation Method of Graded Functional Structure and its Mechanical Properties

Takumi Mizoi, Shinji Ishibashi, Masaki Tsukuda, Hidekazu Maehana, Keit ...

Session ID: H33
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_547

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

In this study, we proposed a graded structure with conical holes to reduce the stress shielding effect generated between a metal implant and a living bone. The designed structure was fabricated by 3D metal additive manufacturing. Then, the correlation between the arrangement of holes and the reproducibility of shape or the mechanical properties was verified. As a result of observation with a scanning electron microscope and the three point bending test, it was found that as the porosity increased, the reproducibility of shape deteriorated and the elastic modulus and the maximum bending stress decreased.

View full abstract

Download PDF (1092K)
[title in Japanese]

Yuta Yoshida, Masahiro Takano, Kenichi Hirosaki, Mitsuyoshi Maekawa

Session ID: H34
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_549

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (526K)
[title in Japanese]

Mitsuru Nagayama, Toshiki Niino, Ikki Horiguchi, Yasuyuki Sakai

Session ID: H36
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_551

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (680K)
[title in Japanese]

Yuki Yamauchi, Takashi Kigure, Toshiki Niino

Session ID: H37
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_553

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (679K)
[title in Japanese]

Takashi Kigure, Yuuki Yamauchi, Toshiki Niino

Session ID: H38
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_555

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (679K)
[title in Japanese]

Kazuki Ohma, Toshiki Niino

Session ID: H39
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_557

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (476K)
Prevention of bumpy texture forming on side of laser sintered parts

Ryuichi Kobayashi, Miyuki Kosugi

Session ID: H62
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_559

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

It sometimes happens that side of laser sintered parts is achieved a poor surface finish called ″orange peel″, which is unintentional bumpy texture. This paper reports that the quality of surface finish was caused by semi-sintered powder sticking on the side of laser sintered parts. It was found that the formation of bumpy structure on the side depended on whether un-melt powder stick to the side or not. In order to control semi-sintered powder sticking on the side, additional low-power laser drawing was operated around the specimen layer by layer. As result, frequency of a good surface finish, which range of Sa is under 20 micrometer increased compared to non-additional laser drawing.

View full abstract

Download PDF (459K)
[title in Japanese]

Fuminobu Kimura, Gota Suzuki, Eiji Yamaguchi, Yusuke Kajihara

Session ID: H63
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_561

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1107K)
[title in Japanese]

Shotaro Kadoya, Fuminobu Kimura, Yusuke Kajihara

Session ID: H64
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_563

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (803K)
Current density dependence on joining strength in EJM based metal-polymer direct joining

Xiaoyan Lyu, Fuminobu Kimura, Yonghua Zhao, Masanori Kunieda, Yusuke K ...

Session ID: H65
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_565

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Injection molded direct joining (IMDJ) is one of the metal-polymer direct joining methods, which is based on metal surface treatment and insert injection molding. In this research, we apply electrolyte jet machining (EJM), to the surface treatment process. EJM is carried out by jetting electrolytic aqueous solution from a nozzle towards a workpiece while a voltage is applied between the nozzle and the workpiece. As metal removal occurs in this process according to electrolytic reactions, micro/nano structures will be formed on surface of the workpiece. In this work, we have developed an EJM apparatus that can process metal pieces and verified the application of EJM to metal-polymer direct joining. We also studied the effects of current density of EJM experiments on average shear strength of metal-polymer joining.

View full abstract

Download PDF (750K)
[title in Japanese]

Takuya Nishihara, Hiroaki Tanaka, Yutaka Kado

Session ID: H67
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_567

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (513K)
Dissimilar metal deposition using wire and arc-based additive manufacturing

Control of chemical component in deposited metal with filler wire

Takeyuki Abe, Daiki Mori, Keiji Sonoya, Masanobu Nakamura, Hiroyuki Sa ...

Session ID: H68
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_569

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (602K)
Study on Reduction of Internal Pores in Directed Energy Deposition Method

Taro Misawa, Ryo Koike, Yasuhiro Kakinuma, Yohei Oda, Tojiro Aoyama

Session ID: H69
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_571

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Progress in additive manufacturing (AM) for metal materials is strongly demanded in aerospace and automobile industries because of its applicability to a low-waste and high-efficient production for complex-shape parts. However, AMs still have several challenges for practical usage such as void evolution inside of the produced object. This study clarifies deposition conditions capable of void suppression in Directed Energy Deposition which is one of the AM methods. Furthermore, a void reduction method is also proposed, which eliminates voids in the produced object by remelting treatment with laser beam.

View full abstract

Download PDF (716K)
[title in Japanese]

Masahiko Onosato

Session ID: I04
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_573

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (412K)
A Framework of System of Systems and its Case Study on Planning of Distributed Generation System

Yutaka Nomaguchi, Kikuo Fujita

Session ID: I06
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_575

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

A system of systems (SoS) is a heterogeneous, autonomous and complex systems. This paper aims at proposing a new framework of SoS design. First, this research discusses the complex situations of SoS, and addresses the three issues of SoS design: 1) nonlinearity and discontinuity of design space, 2) emergence behavior, and 3) high uncertainty. The framework adopts a scenario design method, a multi-agent simulation method, and a robust design method to solve these issues, and integrates them in a sophisticated manner. A case study of designing subsidy polices for a distributed generation system, which is a typical SoS, is demonstrated.

View full abstract

Download PDF (466K)
A Study on Equipment Investment for Manufacturing Systems Based on Portfolio

Koji Iwamura, Momoko Ino, Nobuhiro Sugimura

Session ID: I07
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_577

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (424K)
[title in Japanese]

Yusuke Tsutsui, Yuya Mitake, Yoshiki Shimomura

Session ID: I08
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_579

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (649K)
[title in Japanese]

Kaori Yamada, Toshiharu Taura, Kenji Shimada, Yuichi Washida, Akira Ts ...

Session ID: I09
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_581

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (717K)
[title in Japanese]

Ai Ito, Nobutada Fujii, Toshiya Kaihara, Daisuke Kokuryo, Takeshi Shim ...

Session ID: I13
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_583

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (638K)
[title in Japanese]

Kento Yuasa, Yousuke Kubota, Shintaro Tanno, Keiko Toya, Yoshiki Shimo ...

Session ID: I14
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_585

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (624K)
A study on production scheduling method by cooperation of planners with different evaluation criteria.

Daichi Itaya, Toshiya Kaihara, Nobutada Fujii, Daisuke Kokuryo, Rihito ...

Session ID: I15
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_587

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (391K)
Real time monitoring and scheduling system for multi-item-mixed production line

Norisuke Fujii, Takafumi Chida, Satoru Fushimi, Hiroyuki Suzuki, Junro ...

Session ID: I16
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_589

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (433K)
A proposal of production scheduling method for realization of mass customization

Adjusting the number of operating machines for cost reduction

Toshiya Kaihara, Nobutada Fujii, Daisuke Kokuryo, Kodai Hirai

Session ID: I17
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_591

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (706K)
Multiobjective optimization for topology optimization using an adaptive weighted sum method

Yuki Sato, Kazuhiro Izui, Takayuki Yamada, Shinji Nishiwaki

Session ID: I19
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_593

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (530K)
[title in Japanese]

Shinya Toyota, Takashi Shibata, Masahiro Saito, Toshiki Hirogaki, Eiic ...

Session ID: I20
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_595

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (581K)
[title in Japanese]

Eiji Morinaga, Hidefumi Wakamatsu, Masachika Mega, Eiji Arai

Session ID: I21
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_597

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1073K)
Modeling of product information focusing on supporting processes of product recall

Kohta Minato, Akira Tsumaya, Itsuo Hatono

Session ID: I22
Published: September 05, 2017
Released on J-STAGE: March 05, 2018

DOIhttps://doi.org/10.11522/pscjspe.2017A.0_599

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (550K)

feedback

Top

Register with J-STAGE for free!