Proceedings of JSPE Semestrial Meeting

Browse

Search
Browse

All issues

2012 JSPE Autumn Conference

Displaying 51-100 of 497 articles from this issue

Download citation

Show all abstracts

A high-aspect-ratio touch probe using ultrasonic vibration

Takashi Nishijima, Taito Tanaka

Session ID: B08
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.101.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

This report describes the improvement of a touch probe which is used in the region of the usual size called macro region. In recent years, manufacturing technologies which can create high-aspect-ratio shapes have advanced. On the other hand, measurements of high-aspect shapes such as deep holes and deep gaps have become difficult. In this report, a high-aspect-ratio touch probe for macro region has been developed with reference to the vibrating touch probe technology that is frequently used in the field of nano and micro region measurements.

View full abstract

Download PDF (605K)
Development of a miniature piezoelectric mixer using a bending vibration mode -2nd report

Tomoaki Mashimo

Session ID: B09
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.103.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (427K)
Evaluation of Spherical Shape Ultrasonic Transducer with deposited PZT thin film by Hydrothermal Method

Daichi Nakahira, Takefumi Kanda, Koichi Suzumori, Masahiro Ueno

Session ID: B13
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.105.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

By using a hydrothermal method, PZT thin film can be easily deposited on the substrate of three-dimensional structure. Therefore PZT thin film is applied to a micro piezoelectric actuator. In this study, PZT thin film has been deposited on a bullet shape titanium substrate 2mm and 10mm in diameter by the hydrothermal method and a ultrasonic transducer was fabricated. In addition, a ultrasonic transducer was evaluated by underwater experiment.

View full abstract

Download PDF (484K)
Study on synthesis of piezoelectric materials by Ultrasonic Assisted Hydrothermal Method and its optimization

Gaku Isobe, Takafumi Maeda, Peter Bornmann, Tobias Hemsel, Takeshi Mor ...

Session ID: B14
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.107.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (408K)
[title in Japanese]

Yuuki Iiduka, Takeshi Morita

Session ID: B15
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.109.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (586K)
An actuator to reproduce a deformation-recovery cycle by using two kinds of shape memory polymers with different glass transition temperatures

Satomitsu Imai, Kosei Sakurai, Yuta Takimoto, Kenzo Kojima

Session ID: B16
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.111.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (310K)
[title in Japanese]

Hiroshi Takahashi, Yasuhito Ueda

Session ID: B18
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.113.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (438K)
Development of Spherical UltraSonic Motor for Space

Tsuyoshi Sato, Shigeki Toyama

Session ID: B19
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.115.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (333K)
Development of a Positioning System with a Solid-State element

Ryutaro Ishikawa, Masayuki Hara, Toshiro Higuchi

Session ID: B20
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.117.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (511K)
Development of High–Stiffness Type Displacement Magnifying Mechanism for Piezoelectric Actuator

Shigeto Ogino, Akira Asaumi

Session ID: B21
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.119.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (352K)
Acting Force Characteristics of Non-contact Ultrasonic Support Mechanism for Minute Object

4th report: Influence of object features

Shota Chino, Masaya Takasaki, Yuji Ishino, Takeshi Mizuno

Session ID: B23
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.121.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (590K)
[title in Japanese]

Ryosuke Kamiya, Akihiro Torii, Kae Doki, Akiteru Ueda

Session ID: B24
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.123.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (420K)
Active Damping Control of Linear Slider Supported on Squeeze Air Film

Yuuki Matsumoto, Yuuma Tamaru, Hiroki Shimizu

Session ID: B25
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.125.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (760K)
[title in Japanese]

Mitsuhiro Nishio, Akihiro Torii, Kae Doki, Akiteru Ueda

Session ID: B26
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.127.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (846K)
[title in Japanese]

Hitoshi Ohya

Session ID: B36
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.129.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (323K)
Design Method for Product Recyclability using Recyclability Rate

Shinichi Fukushige, Toshiki Tanino, Takahiro Mizuno, Yuki Matsuyama, E ...

Session ID: B38
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.131.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (406K)
[title in Japanese]

Sinya Imura, Keiji Ogawa, Tosiki Hirogaki, Eiichi Aoyama, Hiromichi No ...

Session ID: B39
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.133.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (562K)
[title in Japanese]

Ryosuke Ito, Nobuo Nakamura, Shinichi Fukushige, Yasushi Umeda

Session ID: B43
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.135.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (321K)
Reuse/sharing business design method considering the difficulties for product transfer

Shinsuke Kondoh, Hitoshi Komoto

Session ID: B44
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.137.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (385K)
[title in Japanese]

Katsuya Urano, Shozo Takata

Session ID: B45
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.139.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (318K)
[title in Japanese]

Eisuke Kunii, Shinichi Fukushige, Yasushi Umeda

Session ID: B46
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.141.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (439K)
Proposal of a Structural Description Method of Scenarios for Sustainable Society Simulation (11th Report)

Verifying effectiveness of Sustainable Society Scenario Simulator through case study

Yuji Mizuno, Yusuke Kishita, Haruna Wada, Shinichi Fukushige, Yasushi ...

Session ID: B47
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.143.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (436K)
[title in Japanese]

Takanori Yazawa, Xin Yuan, Nobutoshi Baba, Yukio Maeda, Hideki Hisada, ...

Session ID: B61
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.145.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (533K)
Study on Cutting Performance of Ball End Milling for Inclined Surface using 3D-CAD

Influence of Feed Direction with Straight-line Path Machining on Cutting Mechanism

Tsuyoshi Fujita, Hiroyasu Iwabe

Session ID: B62
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.147.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (304K)
Synchronous Measurement of Cutting Resistance and Tool Displacement in Radius End Milling with Inclined Tool Orientations

Sho Okimoto, Koichi Kikkawa, Yoshio Mizugaki

Session ID: B63
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.149.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (667K)
Observation of Chip Flow Direction with Curved Cutting Edge in 3-Dimensional Cutting

Comparison of Measured Direction of Chip Flow and Vector of Resultant Cutting Resistance

Daiki Kakubo, Shunsuke Baba, Kouichi Kikkawa, Yoshio Mizugaki

Session ID: B64
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.151.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (731K)
Development of compensation method for tool wear error based on on-machine measuring and in-process post processing

Shuichi Ishizawa, Junichi Kaneko, Kenichiro Horio

Session ID: B66
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.153.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (475K)
Machining error prediction by considering increase of cutting force due to tool wear

Calculation of real cutting length and modeling of increase of cutting force

Takatoshi Nishikawa, Keiichi Kikuta, Takahiro Tsutsumoto, Junichi Kane ...

Session ID: B67
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.155.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Cutting force increases due to tool wear which causes additional machining error. In this paper, a machining error prediction model by considering the effect of tool wear is presented. Real cutting length at each cutting edge position is calculated, and the increase of cutting force and the recession of the cutting edge are modeled as a function of the real cutting length. The presented model was verified with cutting experiments of radius end milling of S55C. The machining errors showed a good agreement with the prediction and were decreased from 49μm to 7μm by applying the prediction on the tool paths modification.

View full abstract

Download PDF (774K)
[title in Japanese]

Hiroko Karashima, Eiji Kondo, Kenji Shimana, Shunichi Yamashita, Mitsu ...

Session ID: B68
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.157.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1042K)
[title in Japanese]

Yoshihito Shimonagayoshi, Eiji Kondo, Kenta Matsumoto, Yuuki Nishimura ...

Session ID: B69
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.159.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (384K)
Investigation of Cutting Phenomena in the side in Micro End-milling

Effect of high speed cutting

Takumi Imada, Heisaburou Nakagawa, Keiji Ogawa, Hitomi Kojima, Haruki ...

Session ID: B73
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.161.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (741K)
[title in Japanese]

Yasuhiko Ougiya, Kyohei Shirahama, Tatsuhiro Kojima, Kenjiro Sou, Kazu ...

Session ID: B74
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.163.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (422K)
[title in Japanese]

Yasuhiko Ougiya, Kenjiro Sou, Tatsuhiro Kojima, Kyohei Shirahama, Kazu ...

Session ID: B75
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.165.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (366K)
[title in Japanese]

Kenichi Iwatsuka, Yukio Maeda, Yoshihito Isokawa, Takanori Yazawa

Session ID: B76
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.167.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (759K)
[title in Japanese]

Toshifumi Inaba, Akira Hosokawa, Takashi Ueda, Tatsuaki Furumoto, Ryut ...

Session ID: B78
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.169.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (494K)
Study on High-Efficiency Trimming of CFRP with End Mill

Tadashi Kaga, Eiji Shamoto, Junichi Tamura, Masayoshi Zaitsu

Session ID: B79
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.171.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (435K)
[title in Japanese]

Syougo Kuramoto, Eiji Kondo

Session ID: B80
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.173.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (461K)
Milling of Ultra Fine Grained Steels (The 2nd report)

Yuji Musha, Tomoaki Yoshino, Takafumi Komatsu, Takashi Matsumura

Session ID: B81
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.175.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

The paper discusses burr formation of ultra fine grained stainless steel with measuring the cutting force and the surface finish in milling. Burr formation in cutting of the ultra fine grained steel is smaller than that of the normal steel. Then, burr formation is associated with the force ratio at the end of cut. A model is presented to explain burr formation with the force ratio.

View full abstract

Download PDF (502K)
Influence of cutting speed on the machinability of natural rubber

Jun Shinozuka, Abdullah Mohd Afiq Bin, Naoki Takahashi, Tappei Higashi

Session ID: B82
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.177.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (830K)
[title in Japanese]

Masahiro Hagino, Takashi Inoue

Session ID: C01
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.179.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (383K)
Effect of tool shapes on helical milling of CFRP (Carbon Fiber Reinforced Plastics)

Shigehiko Sakamoto, Hiroki Iwasa

Session ID: C02
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.181.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (760K)
Effects on the brittle fracture by the cutting edge shape in the glass cutting.

Takenori Ono

Session ID: C03
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.183.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (534K)
[title in Japanese]

Kentaro Ishii, Michihisa Watanabe, Naohiko Sugita, Tatsuya Honjo, Mako ...

Session ID: C04
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.185.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (480K)
Wear mechanism of cBN tools in turning of hardened steel (2nd report)

Masahiro Yano, Tadakazu Ohashi, Yosuke Miyashita

Session ID: C06
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.187.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (948K)
Characterization and application for high-precision cutting tools of binderless nano-polycrystalline cBN

Hitoshi Sumiya, Katsuko Harano, Yu Ishida, Daisuke Murakami

Session ID: C07
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.189.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Single-phase (binderless) nano-polycrystalline cBN consisting of small cBN grains of less than several tens or hundreds nanometers in size without any binder materials has successfully synthesized by direct conversion from hBN under high pressure and high temperature. The nano-polycrystalline cBN has high hardness, high strength and high thermal stability. In order to clarify its potentiality for industrial uses in high-precision cutting tools, the mechanical properties of the nano-polycrystalline cBN were systematically investigated. The basic performance tests for high-precison cutting tools on a hardened steel were also evaluated. These results revealed that the nano-polycrystalline cBN has an extremely high potential for high-precision cutting tools for high strength ferrous material.

View full abstract

Download PDF (502K)
formation of edge sharp and its cutting performance of CVD diamond-coated cutting tools by UV assisted polishing

Akihiro Kanzaki, Mutsumi Touge, Akihisa Kubota, Takeshi Sakamoto, Taka ...

Session ID: C08
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.191.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (513K)
Optimization of poly-crystalline diamond cutting edge geometry by UV assisted polishing

Daisuke Ishimaru, Takeshi Sakamoto, Daisuke Matsunaga, Mutsumi Touge

Session ID: C09
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.193.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (695K)
A study on the high efficiency milling of β type titanium alloy using small ball end mill tool

Hideharu Kato, Shota Kohata, Kazuhiro Shintani, Hiroaki Sugita

Session ID: C13
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.195.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (647K)
[title in Japanese]

Tatsuya Wakabayashi, Yukio Maeda, Masami Masuda, Shinichiro Tokutake

Session ID: C14
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.197.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (455K)
[title in Japanese]

Kenji Wakabayashi, Kazuhiro Shintani, Hitoshi Sumiya, Yuka Higuchi

Session ID: C15
Published: September 01, 2012
Released on J-STAGE: March 01, 2013

DOIhttps://doi.org/10.11522/pscjspe.2012A.0.199.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (586K)

feedback

Top

Register with J-STAGE for free!