Proceedings of JSPE Semestrial Meeting

Browse

Search
Browse

All issues

2014 JSPE Spring Conference

Displaying 251-300 of 651 articles from this issue

Download citation

Show all abstracts

Ultrapresicion cutting of tungsten carbide mold by micro milling tool (3nd report)

Tool Wear Evaluation

Hirofumi Suzuki, Keita Nakana, Mutsumi Okada, Koichi Okada, Yosuke Ito ...

Session ID: G09
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_501

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Micro milling tools made of diamond were developed in order to machine ultraprecision aspheric mold of tungsten carbide precisely. In this report, micro milling tools made of single crystal daiamond and CVD diamond were fabricated and the changes of the tool wear, the form accuracy and the surface roughness were compared with the PCD tool and the resinoid bonded diamond wheel.

View full abstract

Download PDF (927K)
Comparative study on machining characteristic of CVD SiC and sintered SiC using PCD micro end mill

Shogo Takesue, Kazutoshi Katahira, Takeshi Watanabe, Jun Komotori

Session ID: G13
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_503

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (373K)
High Precision Grinding Technology of Micro Dihedral Corner Reflector Array

Shin Kaguchi, Hiroyuki Abe, Katsuji Ishii

Session ID: G14
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_505

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (482K)
Fabrication of Wing with Micro Structure in the Wings of a Dragonfly

Naoyuki Tanabe, Akito Takaoka, Masayoshi Tanaka, Shinjiro Umezu, Hirom ...

Session ID: G15
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_507

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Recently, micro air vehicle (MAV) is carried out to development to rescue and so on. Now helicopter type MAV is main stream. However, aircraft of current fly difficult to steady control and efficiency flight for influence size effect. Therefore, we develop MAV with biomimetics that is applying Engineered; reproduce artificially structure and function of the creature existent in natural world. Creature has high flight performance despite of small wing is existent in natural world. That is dragonfly. Dragonfly′s flight has high flight performances. Because we carried out to investigate flight characteristic of dragonfly to development of micro air vehicle (MAV) model of dragonfly. We carried out to investigate micro structure on wings of dragonfly, because we think that micro structure affect flight characteristic of dragonfly. These Wings have microstructure of spikes and comb shape on surface and reading edge. We fabricated artificial wings with micro spikes, with comb shape and without. As a result artificial wing with micro spike generated more smoothly flow and more vortex than without micro structure. Artificial wing with comb shape generated more smoothly flow and large vortex than without micro structure. Therefore artificial wings with micro structures have effect of lower drag force and upper lift force.

View full abstract

Download PDF (743K)
[title in Japanese]

Kazuma Asakura, Jiwang Yan

Session ID: G16
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_509

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (682K)
[title in Japanese]

Shunsuke Kawatsu, Masanori Kunieda

Session ID: G18
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_511

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (430K)
[title in Japanese]

Daiki Kaneko, Kazuyoshi Tsuchiya

Session ID: G19
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_513

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (636K)
[title in Japanese]

Tomonari Yashiro

Session ID: G34
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_515

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (316K)
Extraction Method of anomalous failures in Equipment Operation Phase

Yuta Kimura, Shozo Takata

Session ID: G36
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_517

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (309K)
[title in Japanese]

Akihiro Oishi, Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, Hiromichi ...

Session ID: G37
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_519

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (516K)
An EOQ Model for Reverse Logistics with Marginal Reuse Rate

Tomomi Nonaka, Toshiya Kaihara, Nobutada Fujii, Jiali Zhu

Session ID: G41
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_521

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (560K)
Module-Based Model Change Planning for Remanufactured Products

Kazuhiro Kin, Shozo Takata

Session ID: G42
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_523

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (356K)
Proposal of a Design Method for Dismantling Products with Split-Lines(2nd Report)

Determination of the location of split-lines by using the geometric model of a product

Yumi Shiraishi, Naoya Miyaji, Shinichi Fukushige, Yasushi Umeda

Session ID: G43
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_525

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (679K)
Integration of DfXs by means of a product life cycle model

Kotaro Nagahara, Shinichi Fukushige, Yasushi Umeda

Session ID: G44
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_527

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (510K)
Mathematical formulation of urban mines design problem

Shinsuke Kondoh, Hitoshi Komoto, Keijiro Masui

Session ID: G46
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_529

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

The amount of metals which has been dumped and accumulated as E-waste to date reaches a scale comparable to natural reserves. These metals are called urban mines and collect attentions recently. To make full use of today′s urban mines as well as those in future, it is necessary to design products and their recycling processes considering future reverse supply chains in a strategic viewpoint. To this end, this study attempts to mathematically formulate the problem focusing on the interdependency among product structure, recycling processes, and reverse supply chain network. A simplified calculation example is also provided to illustrate the formulation.

View full abstract

Download PDF (323K)
Simulation and visualization of recycle flow of small waste electrical and electronic equipment

Hitoshi Komoto, Shinsuke Kondo, Keijiro Masui

Session ID: G47
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_531

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Small waste electrical and electronic equipment (SWEEE) consists of crucial metals for the realization of their functions. If recycled properly, SWEEE becomes a critical element of urban mines in Japan, which provide stable supply of such crucial metals to manufacturers. Simulation and visualization of the flow of SWEEE at the end-of-life stage are useful for the strategic design of urban mines. The paper introduces a simulation and visualization technique of the recycle flow of SWEEE with life cycle simulation. In particular, the visualization technique provides a novel view for analyzing simulated recycle flow resulting from life cycle simulation.

View full abstract

Download PDF (326K)
Designing Scenarios and Simulation-based Evaluation about Diffusion of Renewable Energy Systems in Suita City

Hiroki Tanaka, Akiyuki Sakakibara, Yutaka Nomaguchi, Kikuo Fujita, Yus ...

Session ID: G48
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_533

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (752K)
Development of Ultra-Precision 5-Axis Machine Tool for Optical Mold

Evaluation Obtained by Machining of the Lens Array Mold

Tomohiro Hirose, Yoshihiro Kami, Makoto Yabuya, Yoshitaka Morimoto

Session ID: G62
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_535

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (671K)
A High-Speed Precision Air-Bearing Spindle Controlled by Active Aerodynamic Bearing

Effect of Double Row Active Aerodynamic Bearing

Hiroshi Mizumoto, Youichi Tazoe, Katuhiko Atoji, Tomohiro Hirose

Session ID: G63
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_537

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (683K)
Micro-hole Drilling of Printed Wiring Boards by Machine Tools with Super-high-speed Spindle

Investigation of Vibration Control Effect by Z-axis Counterbalance Mechanism

Ryosuke Shibata, Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa

Session ID: G64
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_539

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (731K)
Development of a Finished Surface Simulator Considering Motion Error of Feed Drive Systems

Yuki Sato, Kazuto Fujii, Ryuta Sato, Keiichi Shirase

Session ID: G66
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_541

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (412K)
Experimental Validation of Tool Path Generation Error in CAD/CAM Process

Shinnosuke Kita, Yoshitaka Morimoto, Keigo Takasugi

Session ID: G67
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_543

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Recently, there are many mechanical parts that are difficult to machine because of complex shapes. A new category on machining these, by 5-axis machining center, so-called ″skillful machining″ has been appeared. This kind of machining method depends on the development and the progress of 3D-CAD/CAM system. But in this case, the generation of tool path for machining of the free curved three dimensional shapes is treated as a function of CAD/CAM system. In some cases, a unexpectd profile error often occurs because of the set of tolerance of the profile by the divided straight lines and the circular arc curves. In this study, to machine the axisymmetric complex curved surfaces with high accuracy, the tool path is calculated directory from the 3D-CAD data and the mathematicaly expressed data. The accuracy of the machined profiles are evaluated and compared.

View full abstract

Download PDF (749K)
[title in Japanese]

Fumiya Sakamoto, Iwao Yamaji, Daisuke Kono, Atsushi Matsubara

Session ID: G68
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_545

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (521K)
Development of multi-axes three coordinate measuring systems using a laser displacement meter

The high precision profile measurement technique

Tatsuki Otsubo, Takanori Yazawa, Reiko Yamada, Yukio Maeda, Keita Fuji ...

Session ID: G69
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_547

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (478K)
Identification Method of NC Controller Sampling Time of Effectiveness of NC Program Based on Sampling Time

Shintaro Sakurai, Hideki Aoyama, Noriaki Sano

Session ID: G73
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_549

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (750K)
Curvature-continuous Sharp Corner Smoothing Scheme for Cartesian Motion Systems

Burak Sencer, susumu Inagaki, Eiji Shamoto

Session ID: G74
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_551

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

In general practice, a geometric tool-path for CNC (computer numerical controlled) machine tools or NC positioning systems is mainly composed of linear motion segments, or so called the G1 commands. This approach exhibits serious limitations in terms of achieving the desired part geometry and productivity in high-speed machining. Velocity and acceleration discontinuities occur at the junction points of consecutive segments if they are not blended continuously. To solve this problem, a corner smoothing algorithm is proposed in this paper, which fits minimum curvature quintic B-splines to blend the adjacent straight lines together. The proposed transition scheme ensures C2 continuity transitions and a minimum curvature geometry delivering the fastest cycle time without violating the axis acceleration limits. The cornering error is controlled analytically allowing the user to set the desired cornering tolerance. At last, a limited bell-shaped acceleration profile is generated to realize smooth feed motion.

View full abstract

Download PDF (488K)
Model-based Friction Compensation Method for NC Machine Tools (2nd Report)

Modeling of position dependent friction and velocity dependent friction

Tomoya Fujita, Kotaro Nagaoka

Session ID: G75
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_553

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (410K)
Preparation of nanoparticle dispersive films unsing pulse vapor depositions

Yasuko Kogoshi, Yuko Aono, Atsushi Hirata

Session ID: H01
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_555

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (390K)
Preparation of Ni-carbon onion composite plating and characterization of its mechanical properties

Tatsuya Kitano, Yuko Aono, Atsushi Hirata

Session ID: H02
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_557

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (552K)
[title in Japanese]

Kei Ito, Kazuyoshi Tsuchiya, Yasutomo Uetsuji

Session ID: H03
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_559

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (624K)
Development of the calculation method for crystal growth prediction of thin films

Yoshihiro Adachi, Kazuyoshi Tsuchiya, Yasutomo Uetsuji

Session ID: H04
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_561

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (449K)
Enhanced evaporation of liquid metal induced by high-pressure hydrogen plasma and its application to high-rate formation of metal film

Hiromasa Ohmi, Hiroaki Kakiuchi, Kiyoshi Yasutake

Session ID: H06
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_563

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (324K)
[title in Japanese]

Yuhei Fujiwara, Yuki Kanetani, Takahiro Yamada, Hiromasa Ohmi, Hiroaki ...

Session ID: H07
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_565

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (626K)
Study on agglutination characteristics of hard coatings(2nd Report)

Akihiro Hirayama, Masao Noma, Masatoshi Aritoshi, Shozo Inoue

Session ID: H08
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_567

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Mechanical properties of hard coatings are usually characterized by nano-indentation, scratch-test and ball-on-disk friction-test. However, the durability of the hard coatings under practical usage sometimes does not coincide the results of these tests. Development of a new method which can evaluate their durability under practical usage is expected. We proposed a new friction test for evaluating the durability of hard coatings in the last spring meeting, which utilized the friction welding apparatus. One of the problems of this method was that the load is too high for our purpose. In this work, we have used a new apparatus which can lighten the friction load, and evaluated the durability of a DLC film.

View full abstract

Download PDF (676K)
Self-propagating exothermic reaction behavior of Ti-Si multilayer films prepared by dual source sputtering

Shozo Inoue, Shoya Minamibata, Keisuke Yoshiki, Takahiro Namazu

Session ID: H09
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_569

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

We have been exploring a Ni-free material showing stable self-propagating reaction for medical use, and reported at the last meeting that Ti-Si multilayer films of Ti:Si = 5:4 could be a promising candidate. Further comprehensive research including the effect of thickness ratio of Ti/Si constituent layer, bilayer thickness and total thickness on the self-propagating reaction behavior is underway. It was found that the Ti-Si multilayer films of Ti:Si = 1:2 also showed intensive self-propagating reaction. The multilayer films with the bilayer thickness of 25 nm appeared to need the least energy to ignite the self-propagating reaction regardless of the Ti/Si thickness ratio.

View full abstract

Download PDF (502K)
Influence of Na₂SO₄ Electrolyzed Oxidizing Water on the Surface of Permalloy 78

Unkai Sato, Hideki Kawakubo

Session ID: H13
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_571

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (559K)
Reaction detection between film surface and chemical regents using SPR phenomenon

Atsuyuki Takarada, Akira Sakaguchi, Naoto Ohtake, Hiroki Akasaka

Session ID: H14
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_573

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (446K)
Laser Packaging by Ultra-Thin Glass

Evaluation of Heat-Affected Zone and Water Resistance

Tatsuro Sadanaga, Yuko Aono, Atsushi Hirata, Hitoshi Tokura

Session ID: H15
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_575

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (437K)
Applying laser peening under dry condition to metallic thin film

Hiroyuki Yamamoto, Yuko Aono, Atsushi Hirata, Hitoshi Tokura

Session ID: H16
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_577

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (453K)
[title in Japanese]

Yuta Kuwaoka, Naohumi Masuya, Takahiro Yamada, Hiroaki Kakiuti, Kiyosh ...

Session ID: H18
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_579

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (528K)
[title in Japanese]

Shiko Iwasaki, Keisuke Nagato, Shunta Shinagawa, Ken Nishibashi, Naoki ...

Session ID: H19
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_581

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (559K)
[title in Japanese]

Kohei Yamanaka, Tomoki Tamura, Shota Matsumoto, Hiroki Akasaka, Naoto ...

Session ID: H20
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_583

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (607K)
[title in Japanese]

Shota Matsumoto, Kohei Yamanaka, Hiroki Akasaka, Naoto Ohtake

Session ID: H21
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_585

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (586K)
Fabrication of Transparent Antifouling ZnO Thin Films Using an Atmospheric Pressure Cold Plasma Deposition System

Yoshifumi Suzaki, Kazufumi Ogawa, Hayato Miyagawa, Tomokazu Shikama

Session ID: H23
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_587

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (703K)
[title in Japanese]

Fumiya Shinoda, Hiroaki Kakiuchi, Kiyoshi Yasutake, Hiromasa Ohmi

Session ID: H24
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_589

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (572K)
[title in Japanese]

Takayuki Sakaguchi, Kohei Okamura, WeiCheng Lin, Takahiro Yamada, Hiro ...

Session ID: H25
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_591

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (639K)
Creation method of the regular pentagonal cross section micro painless needle by the using of the sputtering method

Tomoya Shudo, Kazuyoshi Tsuchiya

Session ID: H32
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_593

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (452K)
[title in Japanese]

Katsuhiro Fukaya, Kazuyoshi Tsuchiya

Session ID: H33
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_595

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (586K)
Aspiration of viscous fluids using ultrasonic assumed dental care

Tomoki Ishitani, Masato Suzuki, Tomokazu Takahashi, Masayuki Kanatani, ...

Session ID: H34
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_597

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (568K)
Evaluation of resistance force of a needle made of plastic tube

Yuya Urushibata, Masato Suzuki, Tomokazu Takahashi, Masahisa Ooishi, S ...

Session ID: H36
Published: March 01, 2014
Released on J-STAGE: September 01, 2014

DOIhttps://doi.org/10.11522/pscjspe.2014S.0_599

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (755K)

feedback

Top

Register with J-STAGE for free!