Proceedings of JSPE Semestrial Meeting

Browse

Search
Browse

All issues

2013 JSPE Spring Conference

Displaying 351-400 of 556 articles from this issue

Download citation

Show all abstracts

Identification and compensation of geometric deviations including squareness deviations of translational axes in five-axis machining centers

ZhiMeng Li, Masaomi Tsutsumi, Noriyuki Kato

Session ID: K32
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.701.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

In our previous study, ignoring the squareness deviations among translational axes, eight geometric deviations about rotational axes have been identified successfully . However, the influence of the squareness deviations under simultaneous three-axis motion was analyzed on the cylindrical coordinate and the orthogonal coordinate, and the squareness deviations among the translational axes were correctly identified by two axis circular interpolation motion and simultaneous three axis motion . In order to verify the effectiveness of the calibration method, the geometric deviations measured were corrected through the NC data for cone-frustum test. From the experimental results, it is confirmed that the radius, center position and roundness of the three dimensional circular trajectories are improved when the geometric deviations are corrected.

View full abstract

Download PDF (565K)
Evaluation of Errors Caused by Geometric Deviations inherent to Five-axis Machining Centers Simulating Cone-frustum Cutting

Noriyuki Kato, Masaomi Tsutsumi, Yong Chen

Session ID: K33
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.703.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (556K)
[title in Japanese]

Goh Sato, Soichi Ibaraki, Kunitaka Takeuchi

Session ID: K34
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.705.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (299K)
Simulation of Electric Power Consumption of Feed Drive Systems for NC Machine Tools

Akio Hayashi, Masayuki Hashimoto, Ryuta Sato, Keiichi Shirase

Session ID: K36
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.707.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

To reduce the electric power consumption in NC machine tools is strongly demanded in these years, because the NC machine tools are one of the main facilities in the manufacturing field. Although measurement tests of the power consumption of the whole machine tool had carried out up to now, this study focused onto the power consumption of feed drive systems. In order to investigate the factors that influence the power consumption and consider how to reduce it, mathematical model for the electric power consumption of feed drive systems in 5-axis machining center is proposed. In this report, the power consumption of each axis during linear reciprocal motion is simulated and compared with the measurement results. In addition, the power consumption during circular motion is also simulated and discussed.

View full abstract

Download PDF (484K)
[title in Japanese]

Tomoya Fujita, Kotaro Nagaoka

Session ID: K37
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.709.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (418K)
Control System Design Method for Feed Drive Systems Using Virtual Friction

Improvement of Response Characteristics of a Ball Screw Feed Drive Table

Hirofumi Itagaki, Masafumi Saito, Masaomi Tsutsumi

Session ID: K38
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.711.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (556K)
Control System Design Method for Feed Drive Systems Using Virtual Friction

Reduction of Rotational Speed Fluctuation in Roller Gear Cam Drive Rotary Table

Hirofumi Itagaki, Takahiro Okano, Masaomi Tsutsumi

Session ID: K39
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.713.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (434K)
Mathematical Model of Machine Tools to Analyze Coupled Vibration of Machine Structure and Feed Drive Systems

Gen Tashiro, Ryuta Sato, Keiichi Shirase

Session ID: K43
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.715.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (297K)
Geometric error modeling to error compensation by modifying the NC code

Three axis machine tool

Kenji Tokumoto, Fumiki Tanaka, Masahiko Onosato

Session ID: K44
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.717.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (492K)
Creation of Curved Surface by lathe Turning-Development of CAM system using original tool layout-

Yoshitaka Morimoto, Soichiro Emoto, Takayuki Moriyama, Yoshiyuki Kanek ...

Session ID: K45
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.719.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1001K)
[title in Japanese]

Kento Nishioka, Hiroshi Koresawa, Hiroyuki Narahara, Hiroshi Suzuki

Session ID: K46
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.721.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (390K)
High-performance hydrostatic bearing with variable inherent restrictor

Yusuke Nakamura, Hiroshi Sawano, Hayato Yoshioka, Hidenori Shinno

Session ID: K60
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.723.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (469K)
Experimental Consideration for Numerical Analysis Result of Porous Air Bearing Characteristics

Kosuke Kadokura, Yuki Osaku, Susumu Ohishi

Session ID: K61
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.725.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (508K)
[title in Japanese]

Takehiro Tanaka, Susumu Ohishi

Session ID: K62
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.727.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (498K)
Research on Thermal Deformation Compensation of Machine Tools (2nd Report)

Evaluation of Thermal Deformation of Machining Center

Yuji Sasaki, Hideki Iwai, Yasumasa Sakurai, Yoshio Wakazono

Session ID: K63
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.729.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (417K)
Development on Test Method of Thermal Effects in Machining Center during Practical Machining

Trulyanto Dimas, Masayuki Okabe

Session ID: K64
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.731.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (726K)
[title in Japanese]

Shinji Shimizu, Kazunari Sawada, Haruhisa Sakamoto

Session ID: K66
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.733.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (641K)
[title in Japanese]

Kyoko Nakamura, Akitoshi Yoshitani, Shinji Shimizu, Haruhisa Sakamoto

Session ID: K67
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.735.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (543K)
[title in Japanese]

Kyoko Nakamura, Akitoshi Yoshitani, Shinji Shimizu, Haruhisa Sakamoto

Session ID: K68
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.737.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (427K)
[title in Japanese]

Shinji Shimizu, Yoshiaki Kabaya, Haruhisa Sakamoto, Kenichi Yamashita

Session ID: K69
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.739.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (388K)
Degradation Phenomenon of Electrical Contacts by using a Micro-Sliding Mechanism

A Micro-Sliding Mechanism on Trial

Shin-ichi Wada, Keiji Koshida, Naoki Masuda, Kunio Yanagi, Hiroaki Kub ...

Session ID: L01
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.741.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Authors have developed the mechanism which gives real vibration to electrical contacts by a hammering oscillating mechanism and a micro-sliding mechanism. They have studied the influence of micro-oscillation on contacts by using the mechanisms. The former generates periodical impulsive force to objects in the vertical direction and the latter generates reciprocal micro-sliding to objects. To input more real oscillation to objects the authors have improve the latter mechanism. They have designed and developed a new mechanism which is made of a piezo-electric actuator instead of a magneto-strictive one and elastic hinges instead of parallel leaf springs. It is suggested that the mechanism has performances enough to analyze the degradation phenomenon of electrical contacts between male-pins and female-pins of a connector by basic sliding performances of the mechanism and by measurements concerning with the phenomenon.

View full abstract

Download PDF (504K)
Velocity Control for Multi-mode Ultrasonic Motor

Atsushi Aizawa, Yuji Ishino, Masaya Takasaki, Takeshi Mizuno

Session ID: L02
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.743.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (455K)
Evaluation of Piezoelectric Materials and Transducer at Ultralow Temperature

Daisuke Yamaguchi, Takefumi Kanda, Koichi Suzumori

Session ID: L03
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.745.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (930K)
[title in Japanese]

Teppei Uchiho, Kazuo Uzuka, Hideyuki Suenaga, Takeshi Morita

Session ID: L04
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.747.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (752K)
Positioning Mechanism Using Rapid Deformation of Shape Memory Alloy Wire

Shinya Hattori, Donghyun Hwang, Toshiro Higuchi

Session ID: L06
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.749.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1029K)
Development of a multi-DOF ER actuator with shape adaptation capability

(Proposal and basic experiments)

Kazuhiro Yoshida, Satoshi Hakoda, Sang In Eom, Shinichi Yokota

Session ID: L07
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.751.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (845K)
Development of Electro-adhesive Gel having variable thermal conductivity

Kunito Konishi, Tojiro Aoyama, Hidenobu Anzai, Hiroharu Sakurai

Session ID: L08
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.753.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (647K)
[title in Japanese]

Tomoaki Mashimo

Session ID: L09
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.755.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (481K)
[title in Japanese]

Hisashi Imai, Kazuyoshi Tsuchiya, Katsutoshi Ooe

Session ID: L10
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.757.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (552K)
[title in Japanese]

Eiichi Aizawa, Yasutomo Uetsuji, Kazuyoshi Tsuchiya

Session ID: L14
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.759.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (536K)
[title in Japanese]

Kouta Yamamoto, Kazuyoshi Tsuchiya, Yasutomo Uetsuji

Session ID: L15
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.761.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (639K)
Droplets Generation in the Flowing Ambient Liquid by using an Ultrasonic Torsional Vibrator and a Micropore Plate

2nd report: Studny on a conditon of Droplets Generation

Takefumi Kanda, Takuji Murakami, Koichi Suzumori, Toru Kishi

Session ID: L16
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.763.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (276K)
Dewatering Using Ultrasonic Wave for Printed Circuit Board

2nd Report:Proposal for Automatic Dewatering System

Kosuke Nakatani, Dang Nguyen Huu, Masaya Takasaki, Takeshi Mizuno

Session ID: L17
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.765.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (625K)
[title in Japanese]

Dang Nguyen Huu, Masaya Takasaki, Takeshi Mizuno, Takayuki Hoshi

Session ID: L18
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.767.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (469K)
Generation of acoustic flow using a cylindrical pipe vibrating in progressive wave with transmission loss

Takehiro Takano, Hideki Tamura, Manabu Aoyagi, Yasuhiro Yamayoshi, Sei ...

Session ID: L20
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.769.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (429K)
[title in Japanese]

Mitsuhiro Nishio, Akihiro Torii, Kae Doki, Akiteru Ueda

Session ID: L21
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.771.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (437K)
[title in Japanese]

Ryosuke Kamiya, Akihiro Torii, Kae Doki, Akiteru Ueda

Session ID: L22
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.773.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (496K)
[title in Japanese]

Masafumi Mutou, Takeshi Morita

Session ID: L23
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.775.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (657K)
An Extracorporeal Maglev Centrifugal-type Blood Pump Employing a Permanent Magnet-free Impeller

2nd Report Maglev Centrifugal Blood Pump Employing a Novel Magnetic Bearing

Ko Momose, Taichi Mamiya, Tadahiko Shinshi, Setsuo Takatani

Session ID: L31
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.777.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (512K)
A Long Term Maintenance-free Maglev Centrifugal Pump for Circulation of Plating Solution

Wei Liu, Tadahiko Shinshi, Shunsuke Mori

Session ID: L32
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.779.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (809K)
Nonlinear Compensation of Electromagnetic Force in a Multi-DOF Lens Drive Actuator for Laser Cutting Machine

Yoshihiro Morimoto, Tadahiko Shinshi, Takahiro Nakai, Teruaki Fukuoka

Session ID: L33
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.781.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (596K)
Basic examination of rotation angle detection system with soft magnetic slit scale

Takeshi Musha, Hajime Nakajima, Hiroshi Inujima

Session ID: L34
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.783.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (282K)
[title in Japanese]

Tadashi Hama, Kaiji Sato

Session ID: L36
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.785.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (166K)
[title in Japanese]

Hikaru Kokumai, Kohei Abe, Kaiji Sato

Session ID: L37
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.787.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (467K)
High Accuracy of Actuator Based on Vibrational Behavior of Piezoelectric Element

Ryo Arakawa, Akira Sakurada, Shigeki Mori, Akihiro Naganawa, Yotsugi S ...

Session ID: L38
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.789.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (345K)
Powder operation by using vibrations for detection of contaminations (2nd Report)

study for operation of packing powder

Shouhei Tokudome, Akira Kakuta, Toshitake Tateno

Session ID: L39
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.791.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Generally, it is difficult to confirm there is no impurity in the package filled by a certain amount powder. Since we can′t break the seal of the package, an automatic system to inspect by a vision device to find impurities and a stir device to move powder is considered. In this study, a compact and reasonable stir device, which moves powder by vibrations that change according to the frequencies, is designed and tested.

View full abstract

Download PDF (521K)
Properties of abrasive grain for grinding high hardness materials by coarse-grinding wheel

Hiroshi Kasuga, Hitoshi Ohmori, Masayoshi Mizutani, Akihiko Nemoto

Session ID: L43
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.793.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (541K)
[title in Japanese]

Akihiro Ohtsuka, Nobuhide Itoh, Mariko Nishimura, Yoshihiro Uehara, Hi ...

Session ID: L44
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.795.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (518K)
Production of the DSSC by the PELID method

Shigeto Kawata, Yuki Shimoyama, Yoshihito Kunugi, Shinjiro Umezu, Hito ...

Session ID: L45
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.797.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (495K)
[title in Japanese]

Shimon Hagiwara, Nobuhide Itoh, Hitoshi Ohmori, Teruko Kato, Hiroshi K ...

Session ID: L46
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.799.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (316K)

feedback

Top

Register with J-STAGE for free!