Proceedings of JSPE Semestrial Meeting

Browse

Search
Browse

All issues

2013 JSPE Spring Conference

Displaying 251-300 of 556 articles from this issue

Download citation

Show all abstracts

Surface modification by EDM with reciprocally rotating electrode

Atsutoshi Hirao, Takayuki Tani, Naotake Mohri, Shoju Aoshima, Nagao Sa ...

Session ID: H08
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.501.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (665K)
Sharpening of Stainless Steel Cutlery Edge by Plasma Etching Treatment

Tsukasa Tamaoki, Akira Okada, Alexey G Remnev, Kensuke Uemura, Yoshiyu ...

Session ID: H09
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.503.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (445K)
Possibility of Curved-hole by Electrical Discharge Machining Using Suspended Ball Electrode

Atsushi Yamaguchi, Akira Okada

Session ID: H13
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.505.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

EDM technique of curved-hole using a metal ball electrode suspended with a copper wire was proposed in this report. By EDM using a copper-tungsten ball of 5.5mm in diameter suspended with cupper wire, the straight hole over 30mm in depth could be drilled into a steel workpiece at a constant machining rate. The electrode ball always vibrated during the process by the impact force associated with sparks, which would results in smoother exclusion of debris. Also, the machining of bended-hole was attempted by varying the tilt angle of the workpiece, and the hole with the bending angle up to 45° could be easy obtained. Moreover, by repeating the machinings of bended-hole, multiple curved holes could be machined by this method.

View full abstract

Download PDF (685K)
Multi-wire Electrical Discharge Machining for Silicon Carbide Part 2

Productivity Improvement of SiC Wafer by 40-wire EDM

Atsushi Itokazu, Hidetaka Miyake, Takashi Hashimoto, Kazuhiko Fukushim ...

Session ID: H14
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.507.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

In this paper, forty-wire electrical discharge machining and multi-wire EDM phenomenon are investigated. In a standpoint of science, multi-wire EDM phenomenon is unexplained. To solve this problem, we observed parallel electrical discharge phenomenon between a wire electrode and a workpiece via high-speed camera. With the aim of productivity improvement of SiC wafers, forty-wire EDM was applied for silicon carbide material which is 100 mm thick. we successfully obtained the average ditch width of 208 µm for forty ditches.

View full abstract

Download PDF (246K)
Influence of External Magnetic Field Addition in EDM of Permanent Magnet

Yoshihiro Ichimura, Hideki Takezawa, Nobuhiro Yokote, Naotake Mohri

Session ID: H15
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.509.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (423K)
Study on Finish EDM with High Voltage Superimposes

Influence of Difference of Detected Working Voltage on Machining Characteristics

Hiroshi Nagoya, Taito Ueda, Masahiro Yoshida

Session ID: H16
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.511.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (480K)
Observation of EDM Arc Plasma Using Transparent Electrodes

Tomoo Kitamura, Masanori Kunieda, Kohzoh Abe

Session ID: H17
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.513.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (706K)
Influence of additives in fabrication of peeling tool by zinc electroplating

Kazuhiro Saito, Tadashi Akatsuka, Rie Tanabe, Yosiro Ito, Hiroshi Mats ...

Session ID: H19
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.515.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (493K)
Electrode Feeding Device for Micro-hole Electrical Discharge Machining by Using AZARASHI Mechanism (2nd Report)

Condition Monitoring during Machining

Katsushi Furutani, Daisuke Hiraoka

Session ID: H20
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.517.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (457K)
Influence of tool electrode shape on depth machining limit in micro EDM

Takumu Miyamoto, Tomohiko Ichikawa, Wataru Natsu

Session ID: H21
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.519.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (693K)
Application of the polarity reversing circuit for the micro EDM of the slit machining on the insulating Si₃N₄ ceramics

Shingo Kawakami, Daiki Hanaoka, Ken Yamashita, Yasushi Fukuzawa

Session ID: H22
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.521.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (628K)
Topographic Features of Small Diameter Diamond Wheel in Ultrasonic Assisted Grinding

Masakazu Fujimoto, Yongbo Wu, Makoto Naito, Mitsuyoshi Nomura, Hidenar ...

Session ID: H34
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.523.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (625K)
Mirror grinding of ferrous material by diamond wheels

Influence of roundness error and hardness inhomogeneity of wheels on ground surface accuracy

Ryutaro Shimizu, Takeshi Osaka, Jun-ichiro Takagi

Session ID: H35
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.525.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (702K)
EDM property of Co-PCD made up of boron doped diamond particles

Manabu Iwai, Shinichi Ninomiya, Kiyoshi Suzuki

Session ID: H36
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.527.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (752K)
Study on effect of grinding Fluid on Grinding pure titanium Considering the environment

Yoshinari Nakamoto, Shinichi Tooe, Toshio Takahashi, Keizo Ohta

Session ID: H37
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.529.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

For the variation of the experimental data due to thermal expansion, the affection of depth of cut by heat expansion cannot be ignored in experiments under infeed grinding on the surface grinder. Then work pieces on the balance type device are ground with constant pressure load for the measurement of stable experimental data. Grinding experiments using CBN wheel and four types of grinding fluid are considered on grinding titanium in association with the environmental grinding technology. The results of experiment indicate that the plant oil-based grinding fluid has a good grinderbility using CBN wheel on specific Grinding Energies. Although there are two types in metalworking fluid non-water-soluble which are the plant oil and the mineral oil, in this experiment the vegetable oil is only used. From now for environmental grinding technology, it is need the next comparative experiment with mineral oil. In addition, and this experiment will be done for getting the mirror surface of titanium which is ground with CBN wheel dressed to flat the tip of abrasive grains.

View full abstract

Download PDF (727K)
Feed control based on prediction of workpiece deflection in grinding

Masashi Yoritsune, Makoto Tano, Toshiki Sakai, Shinji Murakami

Session ID: I01
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.531.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (469K)
Non-destructive inspection for detecting work-affected layer

Ryo Ito, Takayuki Azuma, Shinji Soma, Shinji Murakami, Tsunemoto Kuriy ...

Session ID: I02
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.533.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (605K)
[title in Japanese]

Tomoya Ashida, Kazuhito Ohashi, Shinya Tsukamoto

Session ID: I03
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.535.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (771K)
Study on Face Grinding of Cemented Carbide with Cup Type Plating Diamond Wheel

Toshiyuki Isono, Takanori Fujiwara, Youhei Morinaka, Takashi Onishi, K ...

Session ID: I04
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.537.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (603K)
Identification of specific grinding force according to on-machine measurement results of working surface profiles of grinding wheels

Haruhisa Sakamoto, Yoshinori Sasaki, Yasunori Kobayashi, Shinji Shimiz ...

Session ID: I06
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.539.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (410K)
[title in Japanese]

Yuta Togo, Susumu Ohishi

Session ID: I07
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.541.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (685K)
Grinding of CFRP by the Internal Coolant Supply through Grinding Wheel

Tomoko Kikuma, Yasuhiro Yao, Keigo Nakae, Takeshi Yashiro, Hiroyuki Sa ...

Session ID: I08
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.543.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (556K)
Machining of Titanium Alloys Using Coolant Supplying System from Inner Side of Electrodeposited CBN Wheels

Keigo Nakae, Nagatoshi Nakatsuka, Yasuhiro Yao, Hiroyuki Sasahara

Session ID: I09
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.545.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (597K)
Three-dimensional cutting edge distribution of diamond wheels

Yutaro Ebina, Wei Hang, Libo Zhou, Jun Shimizu, Teppei Onuki, Hirotaka ...

Session ID: I10
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.547.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (571K)
[title in Japanese]

Naoto Yamatsuta, Masakazu Kobayashi, Masatake Higashi

Session ID: I16
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.549.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (424K)
Study on Method to Generate Wood Grain Pattern Representing Required Impression

Ryo Akiyama, Hideki Aoyama, Tetsuo Oya

Session ID: I17
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.551.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (552K)
Method to Design Pattern Representing Natural Impression Based on Modeling of Natural Phenomena

Yuki Kamahara, Hideki Aoyama, Tetsuo Oya

Session ID: I18
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.553.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (389K)
Study on Design to Improve Elderly Person′s Vision Using Vision Simulator

Shiori Yamauchi, Hideki Aoyama, Tetsuo Oya

Session ID: I20
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.555.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1064K)
[title in Japanese]

Jiabin Guan, Satoshi Kanai, Hiroaki Date

Session ID: I21
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.557.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (957K)
[title in Japanese]

Ryosuke Komuro, Satoshi Kondo, Katsuhiro Kitajima

Session ID: I22
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.559.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (703K)
Curvature-continuous Interpolation with the Log-aesthetic Plane Curve

Kenjiro T. Miura, Dai Shibuya, Shin Usuki

Session ID: I24
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.561.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Although the log-aesthetic curves are expressed only by an integral form of the tangent vector, it is possible to interactively generate and deform them and they are expected to be utilized for practical use of industrial and graphical design. In this paper we propose a new method to solve the G2 Hermite interpolation problem with the log-aesthetic plane curve as well as a method to generate an S-shaped curve for G1 Hermite interpolation. The methods proposed in the paper have been implemented as a plug-in module for a commercial CAD system and are successfully used for practical design.

View full abstract

Download PDF (246K)
Comparisons among Numerical Calculations of the Shape of the Log-aesthetic Curve

Dai Shibuya, Kenjiro T. Miura, Shin Usuki

Session ID: I25
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.563.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (196K)
[title in Japanese]

Fumihiko Kimura, Tetsuo Oya, Hideki Aoyama

Session ID: I26
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.565.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (446K)
[title in Japanese]

Tatsuaki Furumoto

Session ID: I31
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.567.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1191K)
3D behavior and cooling characteristics of spatter in laser micro-drilling

Kento Shirasaya, Hibiki Yamamoto, Yasuhiro Okamoto, Akira Okada

Session ID: I32
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.569.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (569K)
Dynamics of fine-particle formation by laser ablation in liquid observed by high-speed laser stroboscopic videography

Takahiro Sugiura, Kenso Tamura, Rie Tanabe, Yoshiro Ito

Session ID: I33
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.571.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (779K)
Control of material removing and deteriorating/damaging in laser microprocessing on lithium niobate single crystal using ultrashort pulsed laser with sub-bandgap wavelength

Ippei Murayama, Teppei Onuki, Hirotaka Ojima, Jun Shimizu, Libo Zhou

Session ID: I34
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.573.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (494K)
[title in Japanese]

Makoto Matsushita, Hirofumi Hidai, Souta Matsusaka, Noboru Morita

Session ID: I35
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.575.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (408K)
Study on Laser Welding Metal to Glass

Simulation for Heat Conduction by Monte Carlo Method

Masashige Mitsuhashi, Takuya Wakabayashi, Masataka Tanaka

Session ID: I37
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.577.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (288K)
Semiconductor laser as a heat source and applications of materials processing.

Takeji Arai, Noritaka Asano, Shigehiro Suzuki, Hitofumi Harada

Session ID: I38
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.579.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Since a semiconductor laser has high conversion efficiency, it has many expectations for effective application. The application trial of processing at an actual factory and spot of processing is increasing. Moreover, it can be used now as a heat source which can carry out processing directly. It is called DDL (Direct Laser Diode). However, since there is almost no information about the structure of DDL, the literature theoretically treated in this heat source is not found. That is considered to have interfered of the broad application for development. The purpose of this study is establishment of the theoretical approach for the semiconductor heat source and simulation for processing.

View full abstract

Download PDF (806K)
[title in Japanese]

Hiroshi Kikuchi, Hisao Kikuta, Akio Mizutani

Session ID: I39
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.581.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (531K)
Deformation analysis of Ti sheet in laser forming along the edge of the sheet

The 2nd report : Estimation of area where the edge of sheet influences the bending angle

Masayuki Nunobiki, Jinno Hayashi, Hiroo Shizuka, Koichi Okuda

Session ID: I40
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.583.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (404K)
Heat treatment of the small parts by the low-powered diode laser aimed at energy saving

Ryosuke Oda, Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, Sachiko Oga ...

Session ID: I44
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.585.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (509K)
Micro-Laser Drilling on Glass substrates with Pulsed CO₂ lasers

Reona Nakamura, Tomotaka Katsura, Shuichi Fujikawa, Takuji Magara, Tak ...

Session ID: I45
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.587.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (571K)
Study on Laser Cleaving of Sapphire Wafer with Groove

Takahide Matsunaga, Takashi Ueda, Tatsuaki Furumoto, Akira Hosokawa, S ...

Session ID: I46
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.589.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (824K)
Study on Laser Etching of SiC

Takeru Mizukawa, Taketo Sugeno, Junichi Ikeno, Kozo Abe

Session ID: I47
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.591.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (597K)
Laser deep grooving of single crystalline silicon in liquid etchant

Takashi Hosono, Kaito Oosera, Daiki Miyazawa, Kazuhiko Sakaki

Session ID: I61
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.593.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (439K)
Laser induced forward transfer of gold film on silicon substrate using an infrared femtosecond laser

Ryosuke Suzuki, Naoya Tujisaka, Rie Tanabe, Yoshiro Ito

Session ID: I62
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.595.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (615K)
[title in Japanese]

Daisuke Sekine, Junichi Ikeno, Nobuhiro Shinozuka, Hideki Suzuki

Session ID: I63
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.597.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (431K)
Three-dimensional machining of a Silicon substrate by an infrared femtosecond Laser

Hiroki Sakashita, Mitsuru Uewada, Rie Tanabe, Yoshiro Ito

Session ID: I64
Published: February 27, 2013
Released on J-STAGE: August 27, 2013

DOIhttps://doi.org/10.11522/pscjspe.2013S.0.599.0

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (547K)

feedback

Top

Register with J-STAGE for free!