Proceedings of JSPE Semestrial Meeting

Browse

Search
Browse

All issues

2015 JSPE Spring Conference

Displaying 151-200 of 551 articles from this issue

Download citation

Show all abstracts

[title in Japanese]

Satoshi Yamazaki, Naomichi Furushiro, Daisuke Hirooka, Tomomi Yamaguch ...

Session ID: E36
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_301

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (569K)
[title in Japanese]

Hiroki Sugitani, Naomichi Furushiro, Daisuke Hirooka, Tomomi Yamaguchi

Session ID: E37
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_303

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (525K)
A study on ductility mode slicing of SiC by multi-wire saw

Kazuhei Matsukawa, Hitoshi Suwabe, Ken-ichi Ishikawa

Session ID: E44
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_305

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (528K)
Influence of slurry and adhesives on mirror surface slicing of silicon wafer

Daisuke Yamada, Hitoshi Suwabe, Ken-ichi Ishikawa

Session ID: E45
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_307

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (481K)
Microgrooving using a Fine Wire Tool

Keitoku Hayashi, Satoshi Sakamoto, Takao Yako, Yasuo Kondo, Kenji Yama ...

Session ID: E46
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_309

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (371K)
[title in Japanese]

MOHDAIZAT MOHDISA, Yu Zhang, Yasuhiro Tani

Session ID: E47
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_311

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (660K)
Improvement of machining accuracy in CFRP secondary working by constant load feeding

Comparison of constant load feeding with constant rate feeding

Yasuo Kondo, Yuki Doi, Takafumi Adachi, Satoshi Sakamoto, Kenji Yamagu ...

Session ID: E48
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_313

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

A new cutting method, Constant Load Feeding, is proposed as a high precious secondary working tool in CFRP cutting. The constant load feeding of CFRP (work material) can restrain the occurrence of cutting defects such as burr and scuffing in a diamond saw cutting. Changing the contact condition between the cutting edges and CFRP, from a Line Contact to a Point Contact, also restrain the occurrence of chipping at the beginning of cutting and the formation of irregular shape at the cutting termination. The combining of Constant load Feeding with Point Contact eliminated most of the cutting defects even in the CFRP cutting with a low rigidity cutting tool like the diamond saw blade.

View full abstract

Download PDF (376K)
Evaluation of low temperature bonded Germanium/Silicon interface

RYUICHIRO HANADA, EIJI HIGURASHI, TADATOMO SUGA

Session ID: E61
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_315

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (423K)
Fabrication of micro-nano scale exothermic particles and their exothermic performances

Takahiro Namazu, Hiroaki Kosaka, Toshihisa Fujito, Keita Inoue, Shozo ...

Session ID: E62
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_317

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (614K)
High-Vacuum Annealing Effect on Mechanical Reliability of FIB-Fabricated Si Nanowires

Tatsuya Fujii, Kojiro Kosugi, Reo Kometani, Muneyuki Naito, Shozo Inou ...

Session ID: E63
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_319

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1105K)
[title in Japanese]

Yoshitomi Morikawa

Session ID: E64
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_321

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (324K)
Industrialization of MEMS Sensors for Consumer Applications

Minoru Sakata

Session ID: E66
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_323

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (360K)
[title in Japanese]

Yoshiyuki Kaiho, Hidetoshi Takahashi, Yutaka Tomimatsu, Takeshi Kobaya ...

Session ID: E67
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_325

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (422K)
Development of ultra-small and low-power wireless sensor nodes for monitoring of acceleration

Koichi Serizawa, Hiroyuki Kuwabara, Jian Lu, Lan Zhang, Masanori Hayas ...

Session ID: E68
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_327

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (440K)
[title in Japanese]

Takahiro Yamashita, Takeshi Kobayashi, Toshihiro Itoh

Session ID: E69
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_329

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (591K)
Evaluation of nanopatterning method using soluble block copolymer polyimide with photosensitizer

Kenta Suzuki, Sung-Won Youn, Hiroshi Hiroshima, Hideki Takagi

Session ID: E70
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_331

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (492K)
High Efficiency Machining of Curved Surfaces by 5 Axis Control Using Flat-endmill and Radius-endmill

Satoshi Yamagata, Hideki Aoyama, Noriaki Sano

Session ID: F01
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_333

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (487K)
[title in Japanese]

Kazunori Sakurai, Koichi Morishige

Session ID: F02
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_335

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (336K)
Approximate correction of tool path by operation interface of multi-axis machining tool

Shunya Sasaki, Koichi Morishige

Session ID: F03
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_337

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (574K)
Tool swept volume generation for 5 axis machine tool with geometric errors by deriving tool swept profile curves

Wataru Arai, Fumiki Tanaka, Masahiko Onosato

Session ID: F05
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_339

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1039K)
[title in Japanese]

Akira Ueno, Keiichi Nakamoto

Session ID: F06
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_341

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (580K)
[title in Japanese]

Takamaru Suzuki, Yuma Maruyama, Toshiki Hirogaki, Eiichi Aoyama, Keiji ...

Session ID: F07
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_343

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (842K)
[title in Japanese]

Kazuki Izumi, Takanori Yazawa, Tatsuki Otsubo, Reiko Yamada, Yukio Mae ...

Session ID: F08
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_345

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (622K)
[title in Japanese]

Hayato Yoshikawa

Session ID: F13
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_347

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (498K)
High Stiffness Aerostatic Bearing in Gas-Liquid Layered Lubrication

Takumi Tsumura, Hiroshi Sawano, Hayato Yoshioka, Hidenori Shinno

Session ID: F15
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_349

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (668K)
Analysis of Nonlinear Friction Induced Vibration of Rolling Guideway by Using Complex Spring

Yasunori Sakai, Hayato Yoshioka, Jiang Zhu, Tomohisa Tanaka, Yoshio Sa ...

Session ID: F16
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_351

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (355K)
A Study on Grease Lubrication of Guide way (1st Report)

Fundamental experiment about the diffusibility

Hiroshi Ozeki, Munetoshi Yagisawa, Yuuki Kawasaki

Session ID: F18
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_353

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Much machine tool is used in the mass production processing factory.Most of machine tool have the sliding guide way of 3 axes of X-Y-Z; the sliding surface lubricates by a lubricating oil.However, because those most are disposable, a great many lubricating oil are used and are discarded.If a lubricating oil using with a machine tool is changed to the grease, the consumption is reduced because a refueling interval time becomes long.This paper evaluate diffusibility of the grease which it supplied to a guide way with a glass plate and a slide block which stood still.As a result, this paper showed that I could change the diffusibility of the grease by the condition of the scraping.

View full abstract

Download PDF (525K)
A Study on Grease Lubrication of Guide way (2nd Report)

Fundamental experiment about reciprocating motion

Hiroshi Ozeki, Yuuki Kawasaki, Munetoshi Yagisawa

Session ID: F19
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_355

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

Much machine tool is used in the mass production processing factory.Most of machine tool have the sliding guide way of 3 axes of X-Y-Z; the sliding surface lubricates by a lubricating oil.However, because those most are disposable, a great many lubricating oil are used and are discarded.If a lubricating oil using with a machine tool is changed to the grease, the consumption is reduced because a refueling interval time becomes long.This paper evaluate adhesion performance of the grease which it supplied to a guide way with a glass plate and a movable slide block.As a result, as for the grease, it is drained reciprocating motion from a slide aspect by sliding, but can change the discharge characteristics by the ratio of contact area and depth of scraping.

View full abstract

Download PDF (439K)
Evaluation of heat and dynamic characteristics on contact surface between the parts

Toru Sato, Tomoyuki Miyashita

Session ID: F20
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_357

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (431K)
[title in Japanese]

Yusuke Hashimoto, Tomoko Hirayama, Takashi Matsuoka, Syun Shibata

Session ID: F21
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_359

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (580K)
Study on tangential stiffness of rough surface contact

Visualization of surface displacement field for contact between transparent resin surfaces

Satoru Maegawa, Fumihiro Itoigawa, Takashi Nakamura

Session ID: F23
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_361

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (981K)
Position and direction dependencies of tool-workpiece loop compliance of machine tools

Daisuke Kono, Atsushi Matsubara

Session ID: F24
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_363

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (286K)
[title in Japanese]

Yusuke Hasegawa, Daisuke Kono, Iwao Yamaji, Atsushi Matsubara

Session ID: F25
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_365

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (372K)
Chatter suppression in deep groove machining by utilizing variable-pitch end mill and feed-directional support

Akira Saito, Eiji Shamoto

Session ID: F31
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_367

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (753K)
[title in Japanese]

Kento Nishioka, Hiroshi Koresawa, Hiroyuki Narahara

Session ID: F32
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_369

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (591K)
[title in Japanese]

Tatsuya Yamashita, Ryousuke Shibata, Masahiro Kishimoto, Toshiki Hirog ...

Session ID: F33
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_371

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (783K)
[title in Japanese]

Wataru Sato, Yusuke Fujimoto, Toshiki Hirogaki, Eiichi Aoyama, Keiji O ...

Session ID: F34
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_373

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (633K)
[title in Japanese]

Junichi Kouguchi, Masato Yanagisawa, Hirotaka Matsuda, Toshiya Takakuw ...

Session ID: F36
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_375

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (590K)
Experimental Validation of Tool Path Generation Error in CAD/CAM Process

Shinnosuke Kita, Yoshitaka Morimoto, Keigo Takasugi

Session ID: F37
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_377

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (637K)
Cutting Force Simulation Referring Workpiece Voxel Model for End-milling Operation

2nd Report: Adaptive Control Based on Predicted Cutting Force

Teruhito Hasegawa, Ryuta Sato, Keiichi Sirase

Session ID: F38
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_379

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (634K)
Model-based Friction Compensation Method for NC Machine Tools (3rd Report)

Tomoya Fujita

Session ID: F43
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_381

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (337K)
[title in Japanese]

Akihiro Narimatsu, Hiroshi Inagaki, Hironari Ishihara

Session ID: F44
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_383

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (558K)
The research of easy cutting test for 5 axis machining center

Toru Yamamoto

Session ID: F45
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_385

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (468K)
Effect of polishing using controlled abrasives under AC field on the surface condition of CBN cutting edge

Hiroshi Tanaka, Yoshitsugu Kawase, Takayuki Kusumi, Youichi Akagami

Session ID: F62
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_387

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (742K)
[title in Japanese]

Kentaro Kawaguchi, Yuji Higuchi, Nobuki Ozawa, Momoji Kubo

Session ID: F63
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_389

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (1074K)
[title in Japanese]

Hideaki Yamada

Session ID: F64
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_391

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (290K)
Development of a novel high performance recycling machine of used slurry with abrasive for glass substrates

Takayuki KUSUMI, Yoichi AKAGAMI, Daisaku MATSUSHITA, Kenji SASAKI, Shi ...

Session ID: F67
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_393

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (620K)
Recycling Simulation of Used CeO₂ Abrasive Grain for CMP of Glass Surface based on Molecular Dynamics Method

Nobuki Ozawa, Zhou Kang, Kentaro Kawaguchi, Yuji Higuchi, Momoji Kubo

Session ID: F68
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_395

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (413K)
Charge transfer profiles at the interface among glass, water and abrasives during chemical mechanical polishing

Seiichi Suda, Taku Sugimoto, Atsushi Masuda

Session ID: F69
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_397

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

[in Japanese]

View full abstract

Download PDF (541K)
Effect of Temperature on Sapphire C plane CMP by Colloidal Silica Slurry

Koichi Kawahara, Toshimasa Suzuki, Seiichi Suda

Session ID: F70
Published: March 01, 2015
Released on J-STAGE: September 01, 2015

DOIhttps://doi.org/10.11522/pscjspe.2015S.0_399

CONFERENCE PROCEEDINGS FREE ACCESS

Show abstractHide abstract

CMP technology has been widely used for sapphire final polishing. In this study, we investigated the effect of temperature on polishing properties of sapphire. Among the temperature range studied in this study, the surface roughness was almost the same irrespective temperature, whereas, the removal rate was revealed to increase with increasing temperature. These results suggest that the chemical reactivity would be more activated at higher temperature during sapphire CMP.

View full abstract

Download PDF (464K)

feedback

Top

Register with J-STAGE for free!