砂防学会誌
Online ISSN : 2187-4654
Print ISSN : 0286-8385
ISSN-L : 0286-8385
75 巻, 3 号
選択された号の論文の10件中1~10を表示しています
口絵〈シリーズ『はかる』〉
論説
研究ノート
  • 中里 友輔, 本居 絵子, 堤 大三
    2022 年 75 巻 3 号 p. 3-9
    発行日: 2022/09/15
    公開日: 2023/09/16
    ジャーナル オープンアクセス

    The snowmelt-type volcanic mudflow, in which the heat of a volcanic eruption melts the snow on the slope and flows down as a mudflow, is a dangerous hazard that may cause enormous damage downstream. In this study, to elucidate the generation process of snowmelt-type mudflow, we conducted an experiment considering the mixture of heated gravel and snow. As a result of the experiment, the snow melted rapidly under the condition of mixing the heated gravel and snow. It was also found that the smaller the particle size of the heated gravel, the higher the snowmelt discharge. To support these results, we conducted a thermal conductivity analysis within a gravel particle in a spherical coordinate system and estimated the rate of the snowmelt. As a result of the analysis, it was well estimated the experimental results with the different heated gravel diameters.

技術ノート
  • 嶋 丈示, 佐々木 流
    2022 年 75 巻 3 号 p. 10-16
    発行日: 2022/09/15
    公開日: 2023/09/16
    ジャーナル オープンアクセス

    The function of a steel open-type dam is to trap debris flow. To fulfill this function, the member spacing of a permeable steel open-type dam should be set to one to two times the maximum or the most boulder diameter. The maximum or the most boulder diameter is determined by cumulative curve using the boulder that have the potential to become debris flow from that location, with the 95th percentile boulder diameter being the maximum boulder diameter and the maximum value in the most boulder diameter zone being the most boulder diameter. In this survey, 200 boulders are selected by the measurer from the available boulder in the field. For this reason, arbitrariness cannot be completely excluded from the fact that the measurer arbitrarily selects boulder. This means that the boulder diameter distribution obtained by the boulder diameter survey is different from the actual boulder diameter distribution. We investigated the distribution of boulder diameter close to the total number using UAV so as not to omit the boulder that was previously omitted by the measurer. As a result, it was confirmed that the maximum and most boulder diameter obtained by the random method contributed to the blockage of the member spacing at the opening of the permeable steel open-type dam.

現場情報コーナー
シリーズ『はかる』
シリーズ『砂防堰堤の設計法に関する過去の議論とこれからの方向性』
ひろば
feedback
Top