レーザー研究
Online ISSN : 1349-6603
Print ISSN : 0387-0200
ISSN-L : 0387-0200
42 巻, 12 号
「レーザー誘起ブレークダウン分光法の産業応用に向けて」特集号
選択された号の論文の12件中1~12を表示しています
「レーザー誘起ブレークダウン分光法の産業応用に向けて」特集号
特集
レーザー解説
レーザーオリジナル
  • 大図 章, 舘 義昭, 有田 裕二
    2014 年 42 巻 12 号 p. 913-
    発行日: 2014年
    公開日: 2020/09/07
    ジャーナル オープンアクセス
    We applied laser-induced breakdown spectroscopy (LIBS) analysis to the molten alloy production process, in which simulated metals (Zr, Cu, Sm, Ce) are used instead of nuclear metallic fuels containing minor actinide (MA). Our aim is in-situ monitoring of the elementary composition of a molten alloy’s surface in a chamber and the vapor particles generated from that surface. We successfully observed the variation in the ratio of the elementary composition of the molten alloy’s surface in the crucible by depending on the crucible’s temperature. The elementary composition of the vapor particles in the molten alloy chamber was also measured. Practical experimental results show that the LIBS technique is very useful for investigating elementary composition in the molten alloy production process and understanding molten alloy behavior in crucibles.
  • 赤岡 克昭, 宮部 昌文, 音部 治幹, 若井田 育夫
    2014 年 42 巻 12 号 p. 918-
    発行日: 2014年
    公開日: 2020/09/07
    ジャーナル オープンアクセス
    For the remote analysis of a next generation nuclear fuel material containing minor actinide (MA), we applied laser-induced breakdown spectroscopy (LIBS) to uranium oxide (U3O8), which included a small amount of neodymium oxide (Nd2O3), as a simulated sample of MA. By using a deconvolution technique for the Nd spectra in U, we separated the complex, overlapped, and confused spectra and determined their actual intensities. As a result, a calibration curve with good linearity and a detection limit of less than 700 ppm were demonstrated.
一般論文
レーザーオリジナル
  • 大垣 正雄, 涌井 伸二
    2014 年 42 巻 12 号 p. 923-
    発行日: 2014年
    公開日: 2020/09/07
    ジャーナル オープンアクセス
    Material development is becoming critical to enhance the thermal efficiency of steam turbines. However, such conventional methods as tension testing machines and strain gauge usage are inappropriate to evaluate material for steam turbine blades because they cannot simultaneously estimate the stress state under the operating condition of turbine blades. To visualize the surface of turbine blades in real time, we developed a high speed shooting system that is composed of a rotary encoder, a digital delay pulse generator, a personal computer, and a timing controller, which was a specially designed unit. With our developed system, we successfully obtained still pictures under conditions where the rotational speed and the circumference temperature were 3,000 rpm and 650 degrees, respectively.
  • 出仙 勇毅, 片桐 崇史, 松浦 祐司
    2014 年 42 巻 12 号 p. 929-
    発行日: 2014年
    公開日: 2020/09/07
    ジャーナル オープンアクセス
    Ultraviolet absorption spectroscopy using a gas cell based on hollow optical fiber is proposed for breath analysis. Compared to conventional infrared gas spectroscopy systems, ultraviolet-based systems are simpler and lower in the cost maintaining high sensitivity. In addition, the hollow-fiber based gas cell enables measurement with a long optical path and extremely small sample volume. Firstly the length of the hollow-fiber gas cell is optimized for analysis of low concentration gas components. Secondly a laser-driven ultraviolet light source having much higher brightness than conventional deuterium light sources is newly utilized in the system. By using the optimized hollow fiber gas cell and the new light source, it is shown that nitric oxide gas with a concentration of a few hundred ppb is successfully measured.
feedback
Top