Online ISSN : 1884-6440
Print ISSN : 0385-1036
ISSN-L : 0385-1036
41 巻, 3 号
選択された号の論文の6件中1~6を表示しています
特集:エネルギー変換に貢献する膜技術
総説
  • 吉宗 美紀, 原谷 賢治
    2016 年 41 巻 3 号 p. 96-101
    発行日: 2016年
    公開日: 2016/10/05
    ジャーナル オープンアクセス
    Fuel cell vehicle (FCV) is garnering much attention as a new environmentally–friendly vehicle of the future. Toward the popularization of the FCVs, a number of technologies of the manufacture, storage and transport of ultrapure hydrogen for the hydrogen station is required. Currently, the researches related to hydrogen energy carriers such as liquid hydrogen, ammonia and organic chemical hydrides have been developed. In this study, ultrapure hydrogen purification technology converted from methylcyclohexane as the organic chemical hydride using carbon membranes for the hydrogen station was investigated. In addition, energy requirement for ultrapure hydrogen purification process by means of carbon membranes was evaluated and compared with that of pressure swing adsorption (PSA) method.
  • 金指 正言, 都留 稔了
    2016 年 41 巻 3 号 p. 102-107
    発行日: 2016年
    公開日: 2016/10/05
    ジャーナル オープンアクセス
    The possibility of applying a catalytic membrane reactor (CMR) to SO3 decomposition in a low–temperature range with the purpose of producing CO2–free hydrogen in Iodine–Sulfur thermochemical cycle was reviewed. A membrane reactor simulation, which is a one-dimensional, isothermal and plug–flow model, was introduced to clarify the strategy for the fabrication of membranes (O2 permeance, selectivity (O2/SO2, O2/SO3)) for the H2SO4 decomposition in IS thermochemical processes. The O2/SO2 permeation properties through organosilica membranes were introduced.
  • 池田 歩, 野村 幹弘
    2016 年 41 巻 3 号 p. 108-113
    発行日: 2016年
    公開日: 2016/10/05
    ジャーナル オープンアクセス
    Thermochemical water splitting IS process is one of the hydrogen production method. The HI decomposition reaction is one of the key reactions in the IS process. The equilibrium conversion of HI decomposition is about 20% at 400℃. In order to improve the conversion, a membrane reactor with H2 permselective membrane can be applied to the reaction. In this study, a silica hybrid membrane was prepared by using a counter diffusion chemical vapor deposition method. The effects of the deposition conditions on the pore size was discussed. The pore size of the HTMOS derived membrane deposited at 450℃ was evaluated at 0.48 nm indicating that the membrane can be applied for the H2/HI separation. HI permeation tests were performed at room temperature and 400℃ through the HTMOS derived membranes. The H2 permeance was 5.0×10–7 mol m–2 s–1 Pa–1 with the H2/HI selectivity of 6820.
  • 八巻 徹也, 小平 岳秀, 澤田 真一, 田中 信幸, 久保 真治, 野村 幹弘
    2016 年 41 巻 3 号 p. 114-120
    発行日: 2016年
    公開日: 2016/10/05
    ジャーナル オープンアクセス
    The Bunsen reaction using an electrolysis cell separated by a cation exchange membrane has been recently proposed as a promising approach to increasing the thermal efficiency of the IS process. We prepared new cation exchange membranes for possible use in this so–called electrochemical Bunsen reaction by the radiation–induced graft copolymerization of styrene and divinylbenzene (DVB) into poly(ethylene–co–tetrafluoroethylene) films and subsequent sulfonation. Quantitative sulfonation of the DVB–crosslinked polystyrene graft–chains led to the preparation of membranes with various ion exchange capacities, thereby making it possible to control their proton conductivities over a wide range. The resulting membranes also exhibited lower water uptake and, therefore, a reduced water flux compared to the non–crosslinked and Nafion membranes. Both H2SO4 in the anolyte and HI in the catholyte were continuously concentrated during the electolysis for 3 h. Reaction overpotential values were similar between our and Nafion membranes. These results demonstrate the applicability of the radiation–grafted cation exchange membranes to the electrochemical Bunsen reactor.
  • 金村 聖志
    2016 年 41 巻 3 号 p. 121-126
    発行日: 2016年
    公開日: 2016/10/05
    ジャーナル オープンアクセス
    Lithium ion batteries have been utilized in portable devices and electric vehicles. In this report, a separator for lithium ion batteries is described from the point of view of battery performance. Some of characteristics of separator are introduced, in addition, a newly developed separator and a three dimensionally structured separator are described in this report, in detail.
製品 & 技術
feedback
Top