-
藤沢 延行
1985 年 51 巻 466 号 p.
1745-1750
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
2方程式乱流モデルを用いて,平面壁,凹面壁,凸面壁に沿う二次元乱流壁面噴流の平均流および乱流特性を予測する方法を示し,それらの特性に対する曲率の影響を検討した.曲率b/R(ただし,b:半値幅,R:曲率半径)が-0.1~0.1の範囲において,予測結果は実験と一致する.乱れエネルギバランスの対流・生成・散逸を実験と対比し,曲面壁面噴流に対するモデルの適用限界について考察している.
抄録全体を表示
-
松尾 一泰, 青木 俊之, 近藤 信昭, 平原 裕行
1985 年 51 巻 466 号 p.
1751-1756
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
伝ぱする衝撃波が,その進行方向に対し傾斜した壁面に入射する場合の反射形態は,正常反射,単純マッハ反射,複合マッハ反乱および二重マッハ反射に分類される.前報ではこれらの反射形篇が起こる条件などを明らかにした.本報では,上記の三つのマッハ反射における反射角,三重点の軌跡角およびキンク点の位置などを光学観察等により実験的に明らかにし,マッハ反射における反射衝撃波の形状について,統一的な説明を行った.
抄録全体を表示
-
杉山 五久夫, 川野 洋典, 新見 英幸
1985 年 51 巻 466 号 p.
1757-1762
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
曲管内の拍動流における断面内速度分布をレーザ流速計を用いて測定し,その流速パターンが湾曲に沿ってどのように推移するかを実験的に調べた.速度分布は,湾曲および拍動の両者の影響を受け,特に最大流速が外側壁に移動した非対称な速度分布を示す時間位相と,ほぼ一様な速度分布を示す時間位相が存在することを明らかにした.管壁近傍の流速分布を基に,壁ずり速度を評価し,その場所的推移を調べた.
抄録全体を表示
-
長谷川 英治
1985 年 51 巻 466 号 p.
1763-1771
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
壁の近くを粘性流体を介して動く弾性円板に働く力と板の変形が解析的に求められた.円板の半径に対する璧との間隔の比と曲げの力に対する圧力の変化量との比はともに小さいとし,それらの比の一次までの正しさで解析され,板の変形だけはそれらの比の積の二次までの正しさで決定された.諸量は壁との間隔Hの関数として表示され,その関数の形を具体的に与えて,板の受ける力と変位が求められ,その性質が調べられた.
抄録全体を表示
-
松永 成徳, 西 道弘, 岡本 実, 宇野 美津夫, 西谷 克彦
1985 年 51 巻 466 号 p.
1772-1780
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
計測技術の発展は目覚しいが,逆流を伴う脈動旋回水流の測定法はまだ確立していないようである.本研究では,開発した非定常流計測用五孔ピトープローブがこのような複雑な流れ場を調べる際に使用できるように,計測法を検討し,計算機を利用したデータ処理法を開発した.ら旋形うず心が見られる円すい広がり管内旋回流にピトープロープを使用して得られた実測値を検討した結果,本論文に示した測定法の有用性が確かめられた.
抄録全体を表示
-
中嶋 幸敏, 白本 和晟, 近藤 徹, 笹口 健吾
1985 年 51 巻 466 号 p.
1781-1788
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
空気圧伝達管路系において,圧力調整弁は二次側の負荷の変動に敏感に即応し,所定の調整圧力に保つ機能を有するが,二次側の負荷によっては弁ばねおよび調整弁内各室圧力の激しい振動を伴う鳴動現象を生ずる場合がある.この不安定現象を敏明し,その改善策を講ずることを目的として,調整圧力,管内径,弁棒の質量,弁ばねの強さなどの各要素が鳴動現象に及ぼす影響を実験的ならびに理論的に研究し,成果があった.
抄録全体を表示
-
川口 清司, 松井 数馬
1985 年 51 巻 466 号 p.
1789-1797
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
本論文では,ドラムカメラを用いることにより,軸流ファン翼周りの流れの可視化方法を確立し,火花追跡法で求めたタイムラインとスモークワイヤ法で求めた流線を合成することにより,翼周りの流速分布を測定した.さらに,この方法を性能の異なる2種類の軸流ファンに適用し,流速分布から計算した翼素効率と翼周りの流れとの関係を調べるとともに,翼端渦が騒音に及ぼす影響を明らかにした
抄録全体を表示
-
世古口 言彦, 上野 隆司, 田中 収
1985 年 51 巻 466 号 p.
1798-1806
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
前報で得られた垂直上昇空気-水系環状ミスト流を特徴づけている主要パラメータ(じょう乱波に関する速度,平均通過ひん度およびそれらの平均間隔,みかけの液膜厚さおよび基底液膜厚さ)の実験データをもとに相関式を作成した.はとんどの主要パラメータは供試管径が12mm付近で極値をもつ傾向があるが,この傾向を表す関数を数個定義し,それらを用いることによって精度良い相関式を得た.さらに従来の相関との比較検討を加えた.
抄録全体を表示
-
深野 徹, 逢坂 昭治, 森本 隆雄, 世古口 言彦
1985 年 51 巻 466 号 p.
1807-1815
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
水平管および水平に近い傾斜管内の空気-水系二相流の主として環状流領域における流動様相ならびに管上部の乾いた壁面上の様相を詳細に観察し,それらに与える供試管の傾斜角の影響を実挨的に明らかにした.さらに,管上部の液膜破断あるいは液膜形成に対してじょう乱波が大きく寄与することを示し,環状流とそれ以外の流動様式とが次の整理式F
r=X(X:マルチネリパラメータ)で傾斜角によらず明確に区分されることも見い出した.
抄録全体を表示
-
藤原 満, 糟谷 勝彦, 松永 銕造, 渡辺 真
1985 年 51 巻 466 号 p.
1816-1824
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
スクリュ圧縮観の圧縮機構をモデル化し,これに基づいたシミュレーションプログラムを開発した.ロータ間すきまやブローホールなどにおける内部漏れ,ロータに噴射される油の密封効果と冷却効果,吸込みと吐出しに伴う抵抗などを考慮した.スクリュ圧縮機は内部漏れ通路が複雑で,従来は性能を理論的に予測することが困禿であったが,本研究の計算プログラムによれば,その幾何学的諸元と運転条件とから性能を予測できる.
抄録全体を表示
-
深野 徹, 児玉 好雄
1985 年 51 巻 466 号 p.
1825-1832
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
軸流および斜流速風機から発生する擬音を対象に翼先端すきまを考慮した音圧レベル予測式を理論的に導入した.その際,翼端渦によって主流の流出角が変えられる結果発生騒音の音響パワーと比例する後流の幅が変わる,という騒音発生モデルを設定した.理論計算結果を3種類の軸流送風機と1種類の斜流送風機の実験結果と比較挨討した結果,導入した理論式は乱流騒音を精度よく予測することが明らかとなった.
抄録全体を表示
-
杉本 昭弥
1985 年 51 巻 466 号 p.
1833
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
ポアソン方程式の高速数値解法として知られている影響係数行列法には,大格子数領域およびノイマン境界条件の取扱いに欠点があった.本研究では簡明な行列演算によってそれらの欠点を克服し,さらに空洞流れに適用した.おもな方法として,SOR法,ADI法,完全な陰解法を併用した結果広いレイノルズ数の範囲にわたって安定な,空間的に二次,時間的には一次または二次の精度をもつ高速数値解法を得ることができた.
抄録全体を表示
-
福迫 尚一郎, 関 信弘, 小森谷 徹, 堀田 直己
1985 年 51 巻 466 号 p.
1834-1840
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
比較的大きな球状粒子を伝熱面上に充てんした場合の沸騰熱伝達挙動を核沸騰域から膜沸騰域までの広い範囲の過熱度においてはあくすることを目的としている.作動流体として蒸留水,フロンR11およびR113を用い,粒子径,粒子層高さ,および粒子材質を変化させ沸騰挙動をはあくし,さらに核沸騰域,遷移沸騰域,および膜沸騰域の伝熱特性に対する無次元整理式の提案も行っている.
抄録全体を表示
-
梁取 美智雄, 内田 幹和, 土方 邦夫, 森 康夫
1985 年 51 巻 466 号 p.
1841-1850
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
蒸発性液体を封入した密閉容器内下向冷却面への熱抵抗を減少させるために,沸騰気泡を冷却面に近づけ,気泡を利用して熱伝達率を促進する実験を行った.その結果,泡立ちの激しい気泡に沿って冷却面の凝縮液膜は排除され,熱伝達率は約50%向上した.このような効果を生じさせる,冷却面-沸騰面間距離,冷却面-液面間距離,沸騰面面積に対する冷却面面積の大きさの影響を定量的に明らかにした.
抄録全体を表示
-
茂地 徹, 伊藤 猛宏, 西川 兼康
1985 年 51 巻 466 号 p.
1851-1856
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
水平円柱および球のまわりの膜沸騰熱伝達に及ぼす放射伝熱の影響を過冷液の強制対流に対して積分境界層の方法で解析した.大気圧水に対して数値解を決定し,放射伝熱の寄与を規定するパラメータとはく離点および熱伝達の関係を検討した.さらに,.水平円柱まわりの強制対流飽和膜沸騰に対するBromleyらの方法の妥当性を吟味した.
抄録全体を表示
-
八柳 信之
1985 年 51 巻 466 号 p.
1857-1866
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
本研究は液体ロケットで用いられる同軸形噴口による噴霧の混合と燃焼性能との関連を明らかにすることを目的とする.本報は,その第1段階として同軸形噴射要素による気液二相噴霧流の構造,すなわち気相速度分布,液滴流束分布などについて実験的に調べた.そして液滴の拡散に重要な係わりをもつk値(液滴流束半値幅と気相速度半値幅の比)が気液噴射流束比および液滴空間密度を含むパラメータによって相関づけられた.
抄録全体を表示
-
斎藤 武雄, 広瀬 宏一
1985 年 51 巻 466 号 p.
1867-1873
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
低密度エネルギの平準化および高密度化のための蓄熱法として相変化を利用する球カプセル形潜熱蓄熱についてカプセル直径,流量,カプセル材質,PCMなどを変えてシミュレーションを行い蓄熱ユニット設計の基碇的データを得た.提案した方式は伝熱面積が大きく熱交換性能に優れ,また,蓄熱器形状を問わない利点を有する.
抄録全体を表示
-
森元 映治, 堀田 和之
1985 年 51 巻 466 号 p.
1874-1882
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
渦巻板式熱交換器の実際的諸相を理想化せず考慮し,温度効率を統一的に無次元表示することの可能性を検討した.標準形熱交換器を想定し,その熱移動基礎方程式の無次元化と数値計算法を示し,温度効率特性チャートを求めた.流路を渦巻き状に巻くことが伝熱面積の約2倍の増加に等しい温度効率の向上を与えることを明らかにした.また各種構造パラメータの影響を感度解析し,渦巻き数n=10程度が妥当な値であることを示した.
抄録全体を表示
-
渡部 富治, 近藤 俶郎, 谷野 賢二
1985 年 51 巻 466 号 p.
1883-1891
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
著者らが発明した,振り子式波力発竜装置に関する理論解析ならびに室内実験の結果を用いて,今回室蘭港外に設置する実験プラントの設計を行った.平均水深2.75m×幅2.3mの水室をもつケーソン内に,幅2m×高さ7.4mの振り子を設置し,水室内に発生させた定常波の水流で振り子を加振・発電する.波高1.5m,周期4sのとき入力20kW,その出力5kWが考えられる.現地据付けを完了している.
抄録全体を表示
-
江守 一郎, 斉藤 孝三
1985 年 51 巻 466 号 p.
1892-1898
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
本研究の目的は,火災における必ずしも互いに相入れない従来の相似則を検討し,より一貫性のある相似則を誘導することである.まず,定在火炎(stationary fire)には液面火炎およびクリプ火炎と呼ばれる二つの異なった燃焼形態が存在することを示し,各々の火炎に関する相似則を求めた.すでに発表された実験結果および著者ら自身の実験により検証した結果,誘導した相似則は火災現象をよく説明できることが示された.
抄録全体を表示
-
城戸 裕之, 和栗 雄太郎, 中島 健四郎
1985 年 51 巻 466 号 p.
1899-1907
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
層流燃焼速度S
Lは同じで,層流火炎の反応域厚さが互いに異なる混合気について乱流燃焼実験を行った.その結果,反応域厚さδは乱流燃焼速度S
Tに大きく影響し,S
Lー定で同じ乱れ強さu'ではδが薄いものほどS
T/S
Lが大きいことが明らかになった.次に(S
T一.S
L)/u'で定義された乱れ強さの有効度は,整理に用いた本論文と他のいくつかの実験結果について,反応域厚さと乱れの平均空間尺度の比が増すにつれて減少することが示された.
抄録全体を表示
-
吉澤 善男, 越後 亮三, 富村 寿夫, 花村 克悟, 古田 基
1985 年 51 巻 466 号 p.
1908-1915
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
空げき率のきわめて大きな多孔性固体の特異な伝熱特性に起因する顕熱・ふく射エネルギ変換効果,ふく射遮へい効果,伝熱促進効果,燃焼侭進効果を応用した高性能加熱装置の開発を目的として,多孔性固体と燃焼の相互作用および多孔性固体内に形成される温度場およびふく射場を実験および数値解析により詳細に明らかにした.その結果,多孔性固体内に高温で強いふく射場の一様な空間を形成することが可能であることが実証された.
抄録全体を表示
-
小沼 義昭, 河合 寿和, 中野 祐次
1985 年 51 巻 466 号 p.
1916-1924
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
ノズル流体にT
lCl
4蒸気を混入し,周囲空気中の水蒸気との混合・反応によって生ずるT
10
2粒子をミー散乱を用いた光学的手法で追跡すること(光散乱法)により,反応生成物の挙動を潮定することを試みた.その結果,この手法は乱流混合場における分子スケールでの均一混合の達成に関する情報を提供するなど,有効な実験手段になりうることがわかった.また,明確な報告のない光散乱法の信頼性について若干の実験的検討を行った
抄録全体を表示
-
川副 嘉彦
1985 年 51 巻 466 号 p.
1925-1932
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
4シリンダの空気調速式圧縮点火機関の噴射量調節系の動作方程式を導き,実験と対照した.減衰係数,等価質量,ダイアフラム実効面積を明らかにし,ハンチングが問題となる低速域では等価減衰係数を使った簡単な動作方程式が適用できることを示した.負圧導管・負圧室系の減衰におよぼす影響も明らかにし,導管内径8mm,長さ40cm,負圧室容積50cm
3の場合には,等価減衰係数は負圧導管・負圧室系のない場合の約2倍であった.
抄録全体を表示
-
池上 詢, 小松 源一, 西脇 一宇
1985 年 51 巻 466 号 p.
1933-1940
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
本論文はエンジンシリンダ内の三次元流れの予測に関するものである.その予測法は運動量および連続の式の支配微分方程式をピストン運動とともに伸縮する格子上での有限階差による解法にもとづくもので,TDMA法を用いている.数値計算は三次元吸入過程と二次元うず室内流れに適用され,計算値を若干の実験結果と対比すると,比較的よい一致がみられ,計算値は流れの基本的特徴をよくとらえていることがわかった.
抄録全体を表示
-
松尾 一泰, 青木 俊之, 平原 裕行, 近藤 信昭, 栗脇 考誠
1985 年 51 巻 466 号 p.
1941-1946
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
The reflection phenomena of a plane moving shock wave at a wedge surface have been investigated by many researchers, and four different types of reflection have been observed in previous shock tube experiments. The authors reported in the previous reports on the domains and boundaries of these four types of reflection and the shape of a reflected shock wave. In the present paper, the distribution of the strength of a reflected shock wave along its wave front has been calculated from its shape obtained by optical observations, and the relation between the strength and the shape of a reflected shock wave has been discussed detail. Furthermore, the Flow properties around the triple point in the case of Mach reflection have been calculated using experimental data, and the validity of the three shock theory has been examined.
抄録全体を表示
-
松尾 一泰, 青木 俊之, 平原 裕行, 近藤 信昭, 岸上 公久
1985 年 51 巻 466 号 p.
1947-1951
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
The transition between regular and Mach reflection of an oblique shock wave has been investigated by many researchers for steady, pseudo-steady and unsteady Flows, However the problem for unsteady Flows such as the reflection of a shock wave at cylindrical concave or convex walls has not been fully understood. The problem considered in this report is that of transition from Mach to regular reflection of a shock wave at a concave wall. Experimental investigations have been performed using a model concave wall. The wall is composed of two straight walls, and the second wall in more inclined than the first one. The process of shock reflection at this wall has been observed in detail, and the transition criterion from Mach to regular reflection in this case has been presented experimentally.
抄録全体を表示
-
松尾 一泰, 川越 茂敏, 園田 圭介, 権 純範, 山本 秀樹, 杉山 英一
1985 年 51 巻 466 号 p.
1952-1956
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
A rapid expansion of moist air or steam in a supersonic nozzle gives rise to condensation phenomena and a condensation shock wave appears in the supersonic section of the nozzle. In the first paper, the mechanism of the formation of a condensation shock wave was studied. In the condensing process, nonequilibrium process of condensation by homogeneous nucleation is followed by equilibrium process of condensation where saturated expansion takes place. In the present study, the nonequilibrium condensation zone has been experimentally investigated, and the relation between the position of the condensation shock wave and the nonequilibrium condensation zone has been clarified. Furthermore, the Flow of condensation zone with and without a condensation shock wave have been wall explained by the results of optical observations and pressure measurements.
抄録全体を表示
-
藤本 哲夫, 宇佐美 勝, 加藤 征三
1985 年 51 巻 466 号 p.
1957-1961
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
A suppressive effect of rarefied gas flow through a circular office caused by temperature increase of the orifice plate has been investigated experimentally using the unsteady approach. Also numerical analysis has been carried out using the direct simulation Monte-Carlo method. Flow rate decreases as the temperature of the orifice plate increases, in proportion to a square root of the ratio between gas temperature and the plate temperature. In spite of the finiteness of the simulation space due to the three dimensional extent of the space, the simulation results are in good agreement with the experimental results. The suppressive effect of gas Flow is found appreciably even in the small plate of which high temperature area is several times as large as a cross-sectional area of its aperture.
抄録全体を表示
-
小林 敏雄, 諸岡 秀行
1985 年 51 巻 466 号 p.
1962-1965
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
In order to simulate an aerodynamics of a road vehicle, some approaches have been examined by use of the Navier-Strokes equation and turbulent models, with the increase of the computer capacity. But in these approaches have been examined by use of the Navier-Stokes equation and turbulent models, with the increase of the computer capacity. But in these approaches these approaches there exist some problems, that are the stability of calculation, the choice of turbulent models, the definition of boundary conditions and so on. For the first step, this paper predicts two dimensional unsteady incompressible viscous Flow around a road vehicle with a code using the finite difference method, the κ-εturbulent model, and rectangular meshes. It is shown that the computation results are good agreement in the distributions of the surface static pressure with the two dimensional experimental data, and that these predictions are affected by the mesh size and boundary conditions of turbulent energy and turbulent dissipation ratio.
抄録全体を表示
-
小林 敏雄, 吉武 康裕
1985 年 51 巻 466 号 p.
1966-1970
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
A specifical system based on the digital image processing approach has been developed for analysing the two dimensional Flow field from pathline photographs. This system has two important problems to be solved. The first problem is to distinguish the overlapping pathlines, and the other is to determine the Flow direction. This system overcomes there problems by using one photograph which contain pathlines obtained by short exposure and its initial positions by instantaneous flash. On this photograph the initial parts of pathlines seem to be brighter and larger than the other parts of pathlines. These characteristics of the initial parts are utilized to distinguish the overlapping pathlines and to determine the Flow direction. The system is applied to two-dimensional water Flow around a circular cylinder and the velocity fields with reverse Flow are extracted automatically.
抄録全体を表示
-
小山 鴻一, 角川 明, 岡本 三千朗
1985 年 51 巻 466 号 p.
1971-1974
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
Measurement of Flow velocity distribution around a marine propeller was carried out by Laser Doppler Velocimeter in a cavitation tunnel. The LDV measurement system which can supply both velocity data and measuring position data relative to blade position was developed, and the information about instantaneous velocity distribution around propeller blades was obtained. Authors succeeded in revealing the vortex system around propellre blades. The effects of strong vortex extending from blade tip was found in the measured velocity data. Accelerated and contracted vortex extending from blade tip was found in the measured velocity data. Accelerated and contracted Flow behind blades was also appeared. Thrust and torque estimated from velocity distribution in slip stream ware compared with direct measurement results. Comparison between experimental results and ligting surface theory shows that the existence of strong tip vortex shown by the experiment can not be followed by the theory. It is necessary to investigate the separated Flow in the region near the blade tip, in order to improve the theoretical method.
抄録全体を表示
-
三宅 圀博, 有賀 一郎
1985 年 51 巻 466 号 p.
1975-1980
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
In this paper, the fundamental performances on the stepped labyrinth seal with various thicknesses and positions of the fin were investigated experimentally in both the stationary and rotating states. As a result, it was found that the leakage in the downward stepped type was less than that in the upward stepped type. In the former case, the optimum seal performance was achieved under the condition that the height of step was 2.5 times as large as the width o the clearance. The seal performance was improved with decreasing the thickness of fines in the case the fines ware placed in the middle of pitch. The performance was also improved by bringing the fines near to the step in the case that the thickness of the fines was equal to the half of a pitch. It was also found that the above-mentioned condition, when compared with the condition in which the straight-through type labyrinth seal was used, had a superior leakage prevention effect, in which the straight-through type labyrinth seal was used, had a superior leakage prevention effect, in which leakage rate decreased by about 70% in the stationary state and by 80% in the rotational state.
抄録全体を表示
-
森下 悦生, 杉原 正浩, 中村 利之
1985 年 51 巻 466 号 p.
1981-1987
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
The scroll compressor has been introduced for air conditioning application. This paper describes the dynamic behavior of the scroll machine with the fixed radius crank mechanism. The equations of motion are established for the orbiting scroll and the Oldham coupling including the friction and the motion of the Oldham coupling is shown. The bearing load, the torque and the power to drive the compressor are obtained. The overturning moment of the orbiting scroll is calculated and the stability condition is clarified.
抄録全体を表示
-
森下 悦生, 杉原 正浩, 稲葉 努, 木村 正
1985 年 51 巻 466 号 p.
1988-1993
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
The Compliant crank mechanism is employed for the scroll compressor to realize the tangential sealing. This paper presents a theoretical model for the scroll machine with the variable radius crank. The analytical expression is orbiting scroll, the force and the torque which act on the rotation and stationary members of the compressor are shown. A simple tangential vibration model is introduced and examined numerically.
抄録全体を表示
-
西山 勝男, 村田 晃伸, 梶川 武信
1985 年 51 巻 466 号 p.
1994-1999
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
The condensation of Roll vapor on a vertical smooth tube in three modes of sinusoidal vibration was studied experimentally in order to evaluate the effect of motion to the heat transfer performance for a moving ocean platform such as OTEC plant. Three modes of vibration were heave, sway (amplitude of vibration A : 50∼352 mm, frequency f : 0.1∼1 H
z) and roll (amplitude of vibration θ: 5∼30 deg, frequency f : 0.1∼1 H
z). The dependencies of amplitude of vibration and frequency on heat transfer performance were examined as compared with visual observation of the condensate film on the periodic moving tube. The effects of each motion to the heat transfer performance were explained.
抄録全体を表示
-
松島 均, 中山 恒, 柳田 武彦, 工藤 昭雄
1985 年 51 巻 466 号 p.
2000-2005
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
Attention is focused on Flows and heat transfer around a tube bundle located near the inlet nozzle in segmentally baffled tubular heat exchangers. A finite-difference analysis is performed to determine Flow patterns, local heat transfer coefficients, and pressure drops across a tube bundle. They are found to agree within a reasonable accuracy with experimental data. Particular attention is directed to the effects of the diameter of an inlet nozzle on slow patterns and local heat transfer coefficients. A noteworthy finding is that, with the use of a relatively large inlet nozzle whose diameter is roughly half of the shell diameter, the variation of local heat transfer coefficient in a tube bundle is contained in a tolerable range of 30 pre cent.
抄録全体を表示
-
中山 顕, / 児山 仁, Hitoshi KOYAMA
1985 年 51 巻 466 号 p.
2006-2014
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
A theoretical analysis is proposed for the forced convective heat transfer from external surfaces immersed in non-Newtonian fluids of the power-law model. The integral method previously introduced for Newtonian fluids has been successfully extended to the non-Newtonian fluids over a flat plate and a wedge of an arbitrary included angle. The integral momentum and energy equations are transformed into a pair of characteristic equation, which can readily be solved for the velocity shape factor and boundary layer thickness ratio, once the exponents in the expressions for the power -low model. Falkner-Skan free stream velocity and wall temperature variation are specified. It has been also found that a closed-form asymptotic expression derived under the assumption of large prandtl number is valid practically for all power low fluids, hence, can be used for a speed and accurate estimation of the local heat transfer to non-Newtonian fluids. The agreement of the predicted results and exact solutions appears to be excellent. Discussions further extends to the case of uniform heat flux.
抄録全体を表示
-
繩田 豊
1985 年 51 巻 466 号 p.
2015-2020
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
A solar cooling and eating system is in operation at the Co-Operative Research Center in the Yatsushiro National College of Technology and the facility's performances has been monitored continuously since it began operation in July 1981. This paper shows the experimental results of solar heating and the evaluation of yearly performance of the solar cooling and heating system following my previous paper mentioned the results of solar cooling. Further, by analyzing the operation results of cooling and heating the incident angle and the wind speed modifiers for flat-plate solar collectors were determined, and by using the results a simulation study was undertaken to find out the most optimum collector Flow rate in the solar heating.
抄録全体を表示
-
石川 禎昭
1985 年 51 巻 466 号 p.
2021-2025
発行日: 1985/06/25
公開日: 2008/03/28
ジャーナル
フリー
At present in Tokyo metropolitan district incombustibles and waste unfit for incineration is dumped at the landfill site. The landfill is however unfavorable method to dispose such waste considering the limitted capacity of landfill site. Because such waste (combustibles and waste unfit for incineration), 20-25 percent of which is occupied by plastics has large volume, in fact its density is only 0.1 t/m
3 or so. Adding that plastics is difficult materials to resolve in the soil. For this reason, technical study for processing incombustibles and waste unfit for incimeration has been made. Applied system is based on pyrolysis gas combustion method in which rotary kiln and after burnig stoker are combined. Processing principle is as follows: that part of exhaust gas in circulated to rotary kiln to pyrolize waste containing plastics, gas generated by pyrolysis secondarily burns at after burning and residue most of which is pure carbon is completely incinerated on after combustion grate. Through substantial tests, it is certified that incombustibles and waste for incineration containing plastics are able to be processed by this method without technical and environmental problems, and it is also proved that no obstacle exists to put it to practical use at full-scale plant.
抄録全体を表示