巻号一覧
前身誌
64 巻, 13 号
選択された号の論文の30件中1～30を表示しています
- |<
- <
- 1
- >
- >|
-
相馬 胤和1978 年 64 巻 13 号 p. 1815-1816
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (473K) -
山本 修滋1978 年 64 巻 13 号 p. 1817-1826
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (2719K) -
片田 中1978 年 64 巻 13 号 p. 1827-1838
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (2709K) -
高城 俊介1978 年 64 巻 13 号 p. 1839-1856
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (3856K) -
鏑木 勝彦, 梅ヶ辻 好博1978 年 64 巻 13 号 p. 1857-1859
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (521K) -
藤井 隆, 野崎 洋彦, 山岸 静直1978 年 64 巻 13 号 p. 1860-1878
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (4257K) -
陣野 友久1978 年 64 巻 13 号 p. 1879-1895
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (5183K) -
彦坂 利久, 斎藤 紀彦, 徳山 博于, 倉重 宗寿, 家長 吉行, 森田 幹男1978 年 64 巻 13 号 p. 1896-1905
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーFor energy saving in integrated steel works, it is important not only to develop the technique in process (e. g., optimal control of heating furnaces and recovery of waste energy), but also to establish the following techniques for keeping energy demand/supply balances optimal.
(1) Daily production scheduling of works under the condition of balances of blast furnace gas, LD gas, electric power, steam and so on.
(2) on-line optimal controlling of demand/supply of energy while it varies time to time.
In Wakayama Works of Sumitomo Metal Industries, a new energy center compurer system has been developed to put these facilities in practice, and the expected energy saving has been achieved.抄録全体を表示PDF形式でダウンロード (1951K) -
佐々木 洋三1978 年 64 巻 13 号 p. 1906-1913
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーRecently, top gas pressure recovery turbine plants have been installed in some steel making plants for energy saving. Eleven turbine plants have been operated including two test plants in Japan.
Total operation time of the first plant (Kawasaki Steel Corp. Mizushima Works No. 2 B.F) was approximately 26 400 hours.
There are two basic types of turbines for energy recovery; wet and dry. A radial flow turbine is of the wet type, and an axial flow turbine is of the dry type. Each turbine has special devices designed for prevention of corrosion, erosion and clogging of the turbine by dust and moisture-laden gas. These turbine systems have had no effect in any way on the blast furnace operation. Recovery turbine output of the first plant reaches 20 to 30% of blast blower input energy and its availability, approximately 85%, is over the average of self-thermal power plants in steel making plants.
In the future, economical plants will be developed for further improvement of turbine output and higher reliability of turbine systems including gas cleaning equipment.抄録全体を表示PDF形式でダウンロード (3753K) -
森 高, 藤村 武生, 佐藤 誠一郎1978 年 64 巻 13 号 p. 1914-1921
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーNippon Kokan K.K. (NKK) undertook the so-called “Ogishima Project” in 1969 with a view of replacing the obsolete steel-making facilities at its Keihin Works with a modern steelmaking base to be constructed at Ogishima, a newly developed industrial area of the Keihin Works. Fortunately, the new C.D.Q. plant made a good start-up and operation. We would like to report its operating data and to consider the effects as the energy-saving technology. As a result, the NKK-Licensintorg C.D.Q. plant is showing high operational stability in coke quenching and is demonstrating excellent performance in energy-saving equipment.抄録全体を表示PDF形式でダウンロード (4173K) -
田中 紀之1978 年 64 巻 13 号 p. 1922-1925
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーCurrently, about 33% of the heat needed for production of sinter is discharged into the atmosphere in the form of exhaust air from sinter coolers. In the present-day sintering practice, one of the most effective ways to recover and utilize the waste heat is considered to use the exhaust air from coolers.
Recovery of the sensible heat of the exhaust air from coolers in now in widespread use in pelletizing plants, which, like sintering plants, agglomerate ore fines. With sintering plants, however, waste-heat recovery has been slow to find acceptance, for many reasons. One major reason is a difference in the agglomerating mechanism between the sintering process and the palletizing process. Another is that there have been too many uncertainties about the economic justifiability of energy-saving efforts in the sintering operation.
This report briefly describes the sintering equipment built in 1976 and discusses the effects of the waste-heat recovery technology incorporated in it.抄録全体を表示PDF形式でダウンロード (758K) -
面田 和利1978 年 64 巻 13 号 p. 1926-1931
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーThe dehumidifying system for the blast furnace air is going to adopt at a number of furnaces in Japan where the air humidity changes fairly with the seasons.
The type of the system has emplayed the principles of condensation or dehydration, or a combination of the two. It is able to condition the blast humidity in constant and low level with the system.
The advantage of this blast conditioning are to operate stably and to reduce the coke ration for the blast furnace practice.
This report classified the contents of these systems, and analized the effect of these system on the operation of the blast furnace.抄録全体を表示PDF形式でダウンロード (1078K) -
川本 良正, 松永 吉之助, 竹村 雅之, 浅井 武二1978 年 64 巻 13 号 p. 1932-1936
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーThere are thirteen units of blast furnace dehumidifiers now at works in our country. We have four methods: dry type lithium chloride method, wet type lithium chloride method, refrigerating method, and blower discharge side-cooling method. Each method has its merits and demerits. It seems there is no conclusive factor to select one from these four.
Among these dehumidifying methods, we gave attention to the blower discharge side-cooling method which had the most compact equipment. Then we developed the direct contact cooling method. Alter we manufactured a test plant on a scale of 1 to 20 and made an actual gas test, we equipped at No. 2 BF in our Kokura Steel Works in May this year. This plant is working satisfactorily.
We developed this method for the purpose of reducing the equipment cost and operating cost. Our direct contact cooling plant is constituted by the heat pipe type exchanger, direct contact air cooler, and high-efficiency mist separator.
In comparison with the conventional type, the installation space and equipment weight are about half. So we could reduce the equipment cost drastically.抄録全体を表示PDF形式でダウンロード (878K) -
山口 武和, 高橋 正章, 伊知地 勝弘, 村田 豊穂1978 年 64 巻 13 号 p. 1937-1946
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーIn these days when energy saving is urgently emphasized in steel works, LD gas recovery is expected to become more and more popular since it satisfied the requirement of the time as the most effective energy saving in the BOF plant.
60 percent or more of total energy contained in the gas generated in the BOF vessel can be recovered as usable gas.
Recently, the recovered LD gas accounts for approx.
6 percent of the total by-product gas in the integrated steel works.
In this paper, the concept, equipment, operation, and actual results of OG system are mentioned as the typical process for the gas recovery system.
Only a half year is enough to recover the additional investment for gas recovery facilities in case of two out of three BOF.
In Japan, more than 60 percent of BOF are operating with gas recovery system in 1977.
In foreign countries, BOF with gas recovery equipment are increasing in number too.抄録全体を表示PDF形式でダウンロード (1866K) -
逆L字型加熱法田村 庸一, 国岡 計夫, 芳賀 行雄1978 年 64 巻 13 号 p. 1947-1958
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーConventional ordinary methods of heating steel ingots in soaking pits consist in setting the furnace temperature at about 1300°C upon charging hot steel ingots into a soaking pit, feeding the fuel at a maximum flow rate at the early period of heating, and gradually reducing the amount of the fuel when the furnace temperature has reached a set value. When the steel ingots heated for a definite period of time have reached the uniform temperature throughout, the soaking process is completed and they are extracted and rolled. For this reason, large quantities of heat are given off as the sensible heat of exhaust gas and as heat radiation from the furnace. Thus this situation is not desirable from the standpoint of energy-saving. To cope with this high fuel price age after the oil shock, the authors have studied heating methods and developed “the inverted-L type heating method”, a new method entirely different from conventional heating methods.
This method consists in heating steel ingots with the fuel at a minimum definite flow rate required for heat balance until the latent heat of solidification has spread throughout the steel ingots, increasing the fuel flow rate just before extraction, and thereby abruptly heating the surface.
The average unit fuel consumption decreased from 183×103 kcal/t in 1973 to 111×103 kcal/t in 1977 when this method was adopted, thus showing a decrease of 34%.抄録全体を表示PDF形式でダウンロード (2502K) -
篠原 虔章, 高橋 明人, 白石 典久1978 年 64 巻 13 号 p. 1959-1967
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーHot slabs after the slabbing mill are at a mean temperature of 1 000°C and have the sensible heat of 160×103 kcal/t-slab. The main features of a Slab Cooling Boiler (SCB) are the recovery of the sensible heat to steam (16kg/cm2 G) by mean of heat radiation from the surface of hot slabs, and continuation of cooling process of almost every kind of slab.
The first installation of an SCB was completed at Slabbing Mill No. 2 in Mizushima Works of Kawasaki Steel Corporation and it has been operating successfully since March, 1976.
The capacity of the heat recovery in this SCB is 72000 kcal/t-slab. It is equal to or greater than the heat consumption of rimmed and semikilled steel in the soaking pit.
This paper discusses the basic heat transfer experiments performed under this development, the basic planning of the installation, the outlines of the system, and some results of the operations.抄録全体を表示PDF形式でダウンロード (6181K) -
福本 行男1978 年 64 巻 13 号 p. 1968-1979
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (3127K) -
時津 哲弥1978 年 64 巻 13 号 p. 1980-1987
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (2797K) -
和田 善郎1978 年 64 巻 13 号 p. 1988-1995
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーThe influence of various factors were considered on the specific heat consumption of reheating furnace in the iron and steel industry. The value of minimum specific heat consumption on the continuous slab reheating furnace which will be built in future was estimated at 266×103kcal/t.
This valus was obtained by mean of calculation and analysis based on the heat balance of a continuous slab rehaeting furnace which is operating with high heat efficiency in this country at present. Further, if the higher heat recovery recuperater is developed, this value will be reduced to about 245×103kcal/teasily.抄録全体を表示PDF形式でダウンロード (1864K) -
福久 陽三, 山崎 二郎, 中間 昭洋, 奥野 隆二, 南 省三1978 年 64 巻 13 号 p. 1996-2005
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーSlab reheating furnace with waste gas jet preheating equipment is purposed for reductin of energy consumption and the improvement of productivity. This paper describes the utilization of this equipment with special reference to the reduction of energy consumption.
The high heat transfer coefficient is obtained by gas jet. The Waste gas of furnace is blown on the charged slabs at a high speed to preheat slabs. As a result, the heat of waste gas is utilized more by the new equipment than by the conventional furnace. Kawasaki Heavy Industries Ltd. has studied the heat transfer of gas jet under the conditions of a actual furnace and the application method of gas jet.
This equipment has been applied to No. 1 reheating furnace of new plate mill of Oita Works. Since January, 1977, the reheating furnace has been operated well without any equipment trouble and has improved energy consumption.抄録全体を表示PDF形式でダウンロード (5401K) -
山嶋 一剛, 津村 一雄, 林 真一, 佐々木 隆雄1978 年 64 巻 13 号 p. 2006-2011
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーA Rotary Hearth Heating Furnace has been designed and installed for both saving energy and reducing NOx emission. The characteristic of this furnace is as follows.
(1) The ceramic fiber lining is used.
(2) The Low-NOx Burner with high efficient combustion is developed.
(3) The combusion control with O2% is adopted.
As a result of those improvement of the efficiency, the amount of town-gas consumption was reduced to 70% and that of NOx emission to 40% of that by the conventional type furnace.
This paper refers to the outline of this new furnace.抄録全体を表示PDF形式でダウンロード (4049K) -
高橋 守雄, 増井 淑郎1978 年 64 巻 13 号 p. 2012-2019
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーFor energy saving, following new hot rolling processes are very useful. One is the hot rolling system which the slab is passed directly without cooling from slabbing mill to hot strip mill (called Hot Direct Rolling). The other is the system which the slab is charged into reheating furnace in hot condition and then is supplied to hot strip mill (called Hot Charge Rolling). Since energy crisis, in 1974, in steel industries, various utmost efforts for the development of these new processes have been made, so that these techniques were established in the mass production scale and were adopted in seven iron workers in Japan.
In this report, for the purpose of cost minimizing from steel making shop to rolling shop, hot direct rolling process and also future aspects of further developments are described.抄録全体を表示PDF形式でダウンロード (4949K) -
白岩 俊男, 広島 龍夫, 松井 健一, 久保 幸雄, 尾崎 孝三郎1978 年 64 巻 13 号 p. 2020-2025
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーA color TV system for inspection of hot slabs has been developed. The system consists of a color TV camera with a mechanical shutter, video disk recorders, and color monitors.
A hot slab under slabbing is shot to be composed of five pictures, and the video disk recorders record the five pictures of the slab. These pictures are simultaneously displayed on five large color monitors. The inspector can easily see surface flaws on the still enlarged pictures.
This system has been installed in Wakayama Steel Works of Sumitomo Metal Ind., Ltd. since 1976, and is used on hot direct rolling from the slabbing mill to the hot strip mill.抄録全体を表示PDF形式でダウンロード (5011K) -
大庭 半次, 田島 陽太郎, 谷崎 豊一, 鈴木 格1978 年 64 巻 13 号 p. 2026-2036
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーOwing mainly to the development of beam-blank hot charging and direct rolling, the Nippon Steel Corporation has succeeded in saving 50% of the fuel consumed when the oil crisis happened, at the wide flange beam mill in Sakai Works.
These processes have four problems, namely surface-defects of products, rolling temperature, mechanical properties of products and production schedule. The results of the study on these problems are as follows.
(1) Surface-defects were mainly caused by blow holes and influenced by rolling temperature. These have been prevented by optimizing deoxidization, hot scarfing and rolling temperature.
(2) The adequate rolling temperature could be secured by altering the size of the beam-blank based on a simulation for the optimum pass schedule.
(3) On mechanical properties, there is little difference between products (JIS SS41 class) made by direct rolling and by ordinary process.
(4) The application rate of hot charging and direct rolling has been raised exceedingly by the introduction of a production control computer system.抄録全体を表示PDF形式でダウンロード (4825K) -
林 武志1978 年 64 巻 13 号 p. 2037-2056
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (5982K) -
木原 諄二1978 年 64 巻 13 号 p. 2057-2060
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (954K) -
とくに廃熱利用について一色 尚次1978 年 64 巻 13 号 p. 2061-2073
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (2823K) -
内田 秀雄1978 年 64 巻 13 号 p. 2074-2081
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (1717K) -
天辰 正義, 月橋 文孝, 野崎 努, 郡司 好喜, 中田 正之, 新井 智久, 菊池 実, 梶原 正憲, 別所 永康1978 年 64 巻 13 号 p. 2082-2085
発行日: 1978/11/01
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (1027K) -
1978 年 64 巻 13 号 p. e1
発行日: 1978年
公開日: 2010/02/22
ジャーナル フリーPDF形式でダウンロード (60K)
- |<
- <
- 1
- >
- >|