-
国友 孟
1985 年 51 巻 463 号 p.
733-737
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
-
永田 拓, 船田 英明, 河合 健次, 松井 辰彌
1985 年 51 巻 463 号 p.
738-747
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
静止流体中で突然出発する円柱背後に形成される非定常渦について,詳細な可視化実験を行った.可視化写真から,円柱表面で生成された渦度の輸送状況を定性的に知る方法と非定常な渦領域の渦度分布を測定する方法を確立した.そして,円柱表面からの渦度が円柱背後に分布する状況,及び円柱表面から溶出する色素によって観察される流動模様と渦度分布の関係を明らかにし,乱れの発生機構について考察を加えた.
抄録全体を表示
-
永田 拓, 船田 英明, 松井 辰彌
1985 年 51 巻 463 号 p.
748-755
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
Al粉末法による可視化写真から,静止流体中で突然一定速度で出発する円柱背後の非定常渦領域の速度場を測定し,渦領域の循環を求めた.渦中心を含む閉曲線の取り方及び経過時間によって循環が変化する状況が明らかにされた.循環等の測定値から渦領域の全体像を把握するために,測定値にもとづく一対の粘性渦糸を用いた簡単なモデルによって渦領域の速度場を計算し,実際の流れ場と比較してモデルの妥当性を確かめた.
抄録全体を表示
-
辻本 良信, 今市 憲作, 友広 輝彦, 後藤 正典
1985 年 51 巻 463 号 p.
756-764
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
斜流羽根車の非定常流れを,準三次流れの仮定の下に流れ関数による定式化の方法を用い,代表回転流れ面を平面円形翼列に写像して特異突法により解析した.非定常特性として羽根車に作用する非定常トルクに着目し,流量および角速度の周期的微小変動および過渡的大変動を扱かった.また非定常トルクに大きな影響を持つ仮想質量係数を,流量変動,角速度変動に対して求め,非定常トルクに及ぼす羽根車の三次元性の影響を調べた.
抄録全体を表示
-
石井 潤治, 本阿弥 眞治
1985 年 51 巻 463 号 p.
765-774
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
馬蹄(てい)形渦と同種のはく離渦を伴うはく離した三次元乱流境界層のはく離点およびはく離領域の静的並びに動的な流動機構を実験的に明らかにした.はく離領域の非定常変動を含めた流れ場をあらゆる角度から検討して,はく離領域に発生過程の異なる4種類のはく離渦が存在し,はく離領域は異なる流動機構を持つ二つの領域に分けられることを確証した.さらに はく離領域に対する新しい流れのモデルを提案し,妥当性を示した.
抄録全体を表示
-
木谷 勝, 松村 昌徳
1985 年 51 巻 463 号 p.
775-782
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
本論文は,中間領域における円柱後流中の速度変動を位相平均することによって,大規模な組織的渦構造とこれに重畳された小規模構造との関係を実験的に調べたものである.大規模構造内における流線,渦度,速度ベクトル,相関の分布を求めるとともに,小規模構造による変動エネルギ,相関,乱流間欠係数の空間的分布を示した.また,この結果にもとづいて大規模構造による連行および渦度の拡散に対する一機構を明らかにすることができた.
抄録全体を表示
-
田代 博之, 富田 侑嗣
1985 年 51 巻 463 号 p.
783-788
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
垂直上昇流れにおける固気二相流の急拡大部の流れを調べた.上流管は直径20.0mm,下流管は30,0mm,40.2mm,49.4mmの3種類かえた.粒子として緩和時間が4.49×10
-2sのP.V.C.パウダ,1.02×10
-1sと1.90×10-<-1>sの2種類のガラスビーズを用いた.その場合付加拡大損失係数が負になり始める値は他の流れ方向の場合と同じ値となった.また同一リチヤードソン数で同一直径比ではそれが負になる度合は水平,下降,上昇流の順で大きくなった.
抄録全体を表示
-
貞広 勝, 花岡 裕
1985 年 51 巻 463 号 p.
789-797
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
自由表面を有し定常的に給・排水する容器内の旋回流れについて実験を試み,形成される主流のフローパターンは三つに大別され半径方向レイノルズ数とロスビ数により分類でき,その種別を速度分布や角運動量分布と関連付けた.また容器底面に形成される境界層内の速度分布を主流が強制うずである理論解と比較し,その特性は主流の影響を強く受けること,さらに壁面摩擦係数については,平板一様流の式で近似できること等の結果を得た.
抄録全体を表示
-
松下 通紀, 村田 滋, 赤松 映明
1985 年 51 巻 463 号 p.
798-805
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
はく離を伴う層流境界層の解析法として,境界層方程式のμについての0次と1次のモーメント式である運動量積分式,エネルギ積分式と新たに導いた2次のモーメント式からなる双曲形の系を基礎式とし,移動壁上のFalkner-Skem流およびくさびの後端をすぎる流れによって与えられる速度分布族を用いる2パラメータ積分法を提案し,円柱とだ円柱の出発流に適用した.
抄録全体を表示
-
富田 幸雄, 横山 俊雄
1985 年 51 巻 463 号 p.
806-810
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
PEOの0.5ppm~1000ppm水溶液の円形断面曲り管内流動を広範囲なレイノルズ数にわたって実験的に調べた.これより,曲り管においても乱流摩擦抵抗が溶媒のそれより減少することを明らかにし,溶液のもつ粘弾性的性質の影響を考慮して曲り管の管摩擦係数を与える実験式をそれぞれ層流域および乱流域について提示した.また,溶液の遷移レイノルズ数はワイセンベルグ数にも依存していることを示し,その実験式を提示した.
抄録全体を表示
-
須藤 浩三, 角田 勝, 高見 敏弘, 山根 隆一郎
1985 年 51 巻 463 号 p.
811-819
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
十分に発達した曲り管内振動流の軸方向の速度分布を,実験的および数値解析的に研究したものである.実験にはレーザー・ドップラー流速計を用い,透明なU字形管内の水の振動流の速度分布を測定した.その結果および数値解析結果を図示して,速度分布に及ぼす振動ディーン数Dおよびウォマスリイ数aの影響を明らかにした.また,ある範囲のD数a数の流れでは,外壁側よりも内壁側の速度が大きくなる特異な流動現象が見い出された.
抄録全体を表示
-
深野 徹, 児玉 好雄, 高松 康生
1985 年 51 巻 463 号 p.
820-828
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
3種類の低圧軸流送風機を用いて翼先端すきまS
-が騒音に与える影響を実験的に調査した・その結果I動翼紬とダクトとに偏心があると高いピークの音が発生するので注意がいるがが0・6mm程度までは小さい程騒音は低下する.S
-を小さくする効果は低流量域ではさらに著しく,最高効率点程度の低騒音領域が低流量域へ大幅に広がる.翼先端近傍の流れの乱れも減少し,低流量特有の離散周波数騒音の発生もなくなる.
抄録全体を表示
-
山本 孝正
1985 年 51 巻 463 号 p.
829-838
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
冷却媒体による三次元空冷翼列性能への影響を詳細に調べるため低速円環翼列風胴を製作し,又精密計測が行える全自動計測装置を製作した.今回,翼面フィルム冷却孔を有する静翼から吹出しのある場合の後流の膨大な測定データを図形解析し,翼正圧面または負圧面から単列吹出しのある場合について,吹出位置の違いによる二次流れへの影響とそれによってひき起こされる翼列後流の全圧損失との関係を明らかにした.
抄録全体を表示
-
山本 孝正, 臼井 弘
1985 年 51 巻 463 号 p.
839-846
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
低アスペクト比の空冷夕一ビン円環静翼列後流における三次元流を含む内部流動と翼列損失の発生メカニズムとの関係を明らかにし,また翼表面各所からフィルム冷却用空気を吹出した場合のそのメカニズムに及ぼす影響を考察した.翼先端間げきを有する本試験翼下流の流れは上下2個の渦と強い先端間げき流から構成され全圧境失もそれらに対応して生じており,吹出しにより種々の影響を受けることが示された.
抄録全体を表示
-
波江 貞弘, 原 正一, 伊飼 通明
1985 年 51 巻 463 号 p.
847-855
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
本報告は,水中に設けられた多孔管より気泡群を放出する際に形成される二次元の二相浮力噴流の挙動について考察したものである.静止水中の噴流に対する解析を拡張して,一様水平流が存在する場合における基礎式を導びくと共に,噴流に作用する流体力を実験的に推定することによって,噴流中心の軌跡について数値計算を行った.上記解析は,周囲水平流速が小さい範囲で有効と考えられる.
抄録全体を表示
-
新井 隆景, 橋本 弘之
1985 年 51 巻 463 号 p.
856-865
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
高速並行気流中に噴出する液膜表面の不安定波について実験および理論的に研究した.その結果,不安定波は流れ方向とそれに直角方向とに生じ,その波数はほぼ等しい.また,気流の速度分布形状をも考慮した線形ケルビン-ヘルムホルツ不安定理論と液膜エネルギの吟味から得られる結果と対比することより本理論で不安定波の波数などの予測が可能であることを示した.液膜の崩壊は不安定波の周期と密接な関係があることも確認した.
抄録全体を表示
-
相場 眞也, 土田 一, 東海林 博美, 佐々木 了
1985 年 51 巻 463 号 p.
866-873
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
壁近傍におかれた円管まわりの熱伝達の挙動を明らかにするため,乱流境界層厚さと等しい直径dの円管と平板問の隙間cを変化させ,熱伝達率,圧力分布,後流幅などの測定を行った.c/d=0.054~0.25ではレイノルズ数R
ed=1.6×10
4近傍を境にして伝熱特性が変化すること,C/d≒0.5で平均熱伝達率が最大となりc/d=∞の場合と比較して最大40%程度大きい結果となることなどを明らかにした.
抄録全体を表示
-
傅 武雄, 相原 利雄
1985 年 51 巻 463 号 p.
874-881
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
管内下降噴霧気流に直交して置かれた円柱について,ブロッケージ比の影響と重力効果を考慮し,液滴群の飛行軌跡を数値解析した.まず液滴の飛行開始条件の影響を詳細に吟味した.次に特定の粒度特性数と鴇等数を持つ主流中の液滴群の粒度分布が,円柱衝突時にどの様な分布に変るかを,対数確率紙とRosin-Rammler線図を使って明らかにした.更に液滴の衝突速度,局所部分捕集効率,局所全捕集効率,等価直径なども求めた.
抄録全体を表示
-
傅 武雄, 相原 利雄
1985 年 51 巻 463 号 p.
882-891
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
第1報と第2報で得られた液滴の飛行軌跡と局所捕集効率に関する解析結果を用いて,鉛直下降噴霧気流中に水平円柱からの熱伝達について,液滴群の粒度分布をRosin-Rammler分布で近似し,液滴の粒度分布と飛行軌跡ブロッケージと重力効果をも考慮して,濃度分程式を含む気液二相境界層方程式を連立させて数値計算を行い,噴霧気流熱伝達と液膜流動に及ぼす上記の諸因子並びに温度差,質量流量比などの影響を定量的に明らかにした・
抄録全体を表示
-
東 之弘, 上松 公彦, 渡部 康一
1985 年 51 巻 463 号 p.
892-899
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
フロン系冷媒R13B1(CB
rF
3)の臨界域における気液共存曲線を,気液界面の消滅を肉眼で直接観察することにより,温度332~340K,密度376~1108kg/m
3の範囲で22点測定した.これらの実測値にもとづいて,R13B1の臨界温度,臨界密度,臨界圧力をそれぞれ340.08K,764kg/m
3,3.956MPaと決定した.加えて,臨界指数βを0・340と決定し広い温度範囲にわたり成立するR13B1の気液共存曲線の相関式を作成した.
抄録全体を表示
-
根本 栄治, 川下 研介
1985 年 51 巻 463 号 p.
900-909
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
レーザ入射光の中に,高い温度変化率の屈折率関数を有する散乱粒子(ソーダガラス,ヘキサデカンなど)を置くとミー散乱現象によって散乱効率,散乱光強度,および備光比が温度変化により変わることを明らかにした.本方法は,熱電対などの直接接触判定法CARSなどの分光的測定法と原理的に異なる測温に関する一方法を提示している.ゆえに,これらの相互関係により散乱粒子の温度測定が可能であるとの結論をえた.
抄録全体を表示
-
綾 威雄, 成合 英樹, 若林 学
1985 年 51 巻 463 号 p.
910-918
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
蒸気をサブクール水中で凝縮させる際発生する振動現象の内,高蒸気質量流束時に特徴的な凝縮振動の振動周波数について実験及び解析から検討した.ベント管出口の蒸気泡振動を表す3階の線形微分方程式の特性方程式から求めた周波数が,大気圧近傍では,凝縮支配惑いは気泡の自由振動モデルで近似できる場合の多いことを示すとともに,従来得られている小規模実験データがはぼこれらの解析解によって説明できることを示した.
抄録全体を表示
-
藤林 晃夫, 熊谷 哲, 武山 斌郎
1985 年 51 巻 463 号 p.
919-927
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
伝熱面へ鉛直方向から液体を供給する吹き付け沸騰・伝熱面周囲から鉛直方向へ液体を吸い上げる吸込み沸騰の流動様式のそれぞれに,水平上向きおよび下向きの伝熱面姿勢を組合わせた四つの特殊サブクール沸騰系の実験をおこない,サブクール度80Kの熱伝達特性について比較考察した.とくにDNB点以降でそれぞれの沸騰系に特徴が現れ,上向きの吹込み流れでは気泡の微細化現象を伴う高熱流束の熱伝達を示した.
抄録全体を表示
-
井口 裕雄
1985 年 51 巻 463 号 p.
928-935
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
新幹線鉄道をはじめとする地上交通機関の高速化は,トンネル建設技術の進展と相まって,トンネルの長大化を促してきた.長大トンネルでは,自然換気だけでは内部での発生熱が十分排出されず,温度上昇に対する何らかの対策が必要となる.このため,新たに縦流換気を行う長大トンネルの温湿度シミュレーション手法を開発し,さらにその応用により,トンネルの温湿度に影響を及ぼす諸因子について解明した.
抄録全体を表示
-
白川 清一郎, 大沢 克幸, 近藤 継男
1985 年 51 巻 463 号 p.
936-945
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
従来の変形FLIC法をICE法を用いた部分陰解法型変形FLIC法に改良し,計算時間の短縮および数値安定性の向上を図った.また,定容燃焼器内の空気中に接線方向からCO
2を吹込み,その混合過程をシユリーレン法により観察した結果と本計算により解析した結果とを比較し,両者がよく一致することを確認した.これにより,本計算法が濃度の拡散・混合過程を計算する手法としても有効であることが確認できた.
抄録全体を表示
-
山田 貴延, 三留 崇史, 近久 武美, 宮本 登, 村山 正
1985 年 51 巻 463 号 p.
946-953
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
本研究は,ディーゼル機関において,とくに低セタン価燃料を用いた場合に問題となる燃焼変動の特性,発生機構,あるいは支配因子などについて解析を行った.その結果,燃焼変動は,着火遅れの増加に伴う着火遅れ自身の変動に起因するランダムな現象であって,主として予混合燃焼率の変動に対する相関が強いこと,また性能上では平均有効圧の変動を増加させると共に,熱効率を直線的に低下させることなどを明らかにした.
抄録全体を表示
-
安藤 安則, 河合 理文, 藤本 達見, 水本 伸子
1985 年 51 巻 463 号 p.
954-958
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
This paper describes a three-dimensional finite difference calculation procedure for the turbulent dispersal in the vicinity of a rectangular building with a short adjacent stack. The mathematical model comprises differential equations for continuity, momentum and concentration. The solution procedure employ SIMPLE (Semi-Implicit Method for Pressure Linked Equations) algorithm. The turbulence model incorporated in the present procedure is the mixing length model. The prediction procedure is applied to predict the Flowfield and concentration field around the same trends as measured ones, and the quantitative agreement is found to be in general good.
抄録全体を表示
-
真鍋 克士, 白国 紀行, 森川 武雄
1985 年 51 巻 463 号 p.
959-964
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
The aerodynamic noise from pantograph is one of the important external noise source of a high speed train as Shinkansen. The external noises of testing trains were measured using a linear-array type directional microphon and a full-scale pantograph was tested in a low noise wind tunnel. It is shown that the intensity of the pantograph aerodynamic noise is proportional to the 6th power of velocity and severe at the near place to the head of a train. A frequency analysis shows that the Aeolian tones from the bow and the oblique pipe of pantograph give main contributions. It is confirmed that an appropriate irregularity of diameter of cylinder or an air gap in the section of the bow are effective for reducing the Aeolian tones.
抄録全体を表示
-
五十嵐 保
1985 年 51 巻 463 号 p.
965-972
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
Experimental investigations on the fluid Flow and heat transfer around rectangular cylinders were carried out in the range of subcritical Reynolds numbers. The width/height ratio (c/d) of a section was from 0.33 to 1.5. The local heat transfer coefficients around the cylinder become clear in connection with the Flow characteristics. The average heat transfer around the cylinder is given by N
um = C
mR
e2/3 for c/d ≥0.67. And those of the side and rear faces are given by N
us= c
sR
e2/3 and N
ub = c
bR
2/3, respectively. These constants c
m, c
s and c
b increase with an increase in drag coefficient. c
D. The average heat transfer coefficient of the rear face, h
b^
-, is correlated with the rms values of the fluctuating pressure, Δp, by the expression h
b^
-∝Δp
<0.30∼0.33.>
抄録全体を表示
-
鳴海 明, 加藤 征三, 柳瀬 哲也, 寺田 耕, 泉 亮太郎
1985 年 51 巻 463 号 p.
973-981
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
The characteristic of forced convection heat transfer over a inclined flat plate of finite width with a semi-circular nose is investigated by the experiments in the range of the attack angle of incidence α= -20∼20°, the finite width w = 30∼110mm (its aspect ratio of width to thickness w/2h=3∼11) and the unit Reynolds number U
∞/v
∞ =5.5×10
5 ∼1.1 ×10
6m
-<1> (μ
∞ and ν
∞ : velocity and kinematic viscosity of free stream). At the front surface of W/2h≥6, when α<5°the local heat transfer coefficient remains almost in the value for α=0°, but it reduces remarkably to above decreases to a certain extent with a decrease of μ∞.At the back surface, the heat transfer always enhances better as α increase. The local heat transfer plates of W/2h<6, the heat transfer performance is greater than that of wider plates. The heat transfer characteristic corresponds well to the Flow one.
抄録全体を表示
-
熊田 俊明
1985 年 51 巻 463 号 p.
982-988
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
A method has been proposed for measuring local heat and mass transfer coefficients. The method uses the change of wet surface temperature by radiation heating and can be applied to the isothermal condition and the large variation of the local heat transfer coefficient along the surface of a body. The present method is based on the heat balance equation, which expresses a simple relationship between transfer coefficients of a flat plate. The results confirmed the effectiveness of the present method to measure the local heat and mass transfer coefficients with reasonable accuracy.
抄録全体を表示
-
福迫 尚一郎, 関 信弘, 石黒 正剛, 江口 徳雄
1985 年 51 巻 463 号 p.
989-995
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
Experiments have been performed to investigate heat-transfer characteristic of a heated tube immersed horizontally within particles bed. Measurements were carried out for the ranges of fixed bed to fluidized bed. A variety of particles with densities ranging from 60 to 8960kg/m
3 and with thermal conductivities of 0.043 to 352 W/(m·K) were utilized as testing particles, while an air as working fluid. The maximum heat transfer coefficients expressed in the form of Nusselt number for the fluidized beds were found to be well correlated in terms of Archimedes number, the diameter ratio of particle to heated tube, and the density ratio of particle to working fluid.
抄録全体を表示
-
稲葉 英男, 和田 靖
1985 年 51 巻 463 号 p.
996-1001
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
This study deals numerically with a convective heat transfer in an inclined rectangular cavity with heated from bottom heating surface in a forced laminar Flow. Flow patterns and temperature profiles in the cavity and local and average heat transfer coefficients on the bottom heating surface are presented by Up-Wind difference numerical method for various Reynolds numbers R
eH, Grashoff numbers G
rw and inclination angles θ. It is clarified that the inclination angle has an important role in estimating the Flow pattern and heat transfer in the inclined cavity. It is also understood that the Nusselt number is not increased monotonically with increasing R
eH at G
rw = 2×10
3 at low R
eH.
抄録全体を表示
-
柏木 孝夫, 黒崎 晏夫, 宍戸 弘明
1985 年 51 巻 463 号 p.
1002-1009
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
This study explores the mechanism of the steam absorption enhancement by the addition of small amount of n-octanol (C
8 H
17 OH) into the aqueous solution of LiBr. Both the visualization by holographic interferometer and the temperature measurements in the solution indicate clearly that the steam absorption processes are classified into three representative cases by the amount of n-octanol addition. The violent Marangoni convection is recognized shortly after the steam absorption starts in the addition range of 00.1∼2 mass %. Especially in case of 0.1mass%, the heat input by the steam absorption increases to almost 400% compared with the one without the addition. Furthermore the measurements of the surface tension and the observations on the solution surface are made in order to investigate the basic mechanism for the generation of the Marangoni convection. It is the surface of the solution.
抄録全体を表示
-
和田 祥夫, 高野 剛, 川口 直樹, 長坂 雄次, 長島 昭
1985 年 51 巻 463 号 p.
1010-1016
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
The thermal conductivities of several pure liquid hydrocarbons (C
11, C
14, C
15, C
16) and their binary mixtures (C
7+C
11, C
11+C
16, C
7+
16) have been measured in the temperature range from 20 to 90°C at atmosphric pressure. Measurements have been performed with the aid of a fully automated transient hot-wire instrument. The accuracy of the reported data is estimated to be ±1 to ±1.5%. A new simple equation, which can calculate the thermal conductivity of pure n-paraffins (4≤n≤16) with the uncertainty of ±1%, has been correlated in terms of temperature and number of binary n- paraffin (7≤n≤16) mixtures was proposed and was adequately confirmed by the present results within the experimental error.
抄録全体を表示
-
土方 邦夫, 森 康夫, 長崎 孝夫, 園田 幸弘
1985 年 51 巻 463 号 p.
1017-1025
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
An experimental study on production of high-speed mist Flow by expansion oFlow temperature hot water through convergent-divergent nozzles has been carried out. The effect of the nozzle divergent angle was investigated, and inlet swirl effect was also studied. Pressure and temperature distributions along nozzles, droplet's velocity and diameter, and droplet's entrainment ratio were measured. It was found that two kinds of Flow pattern exist after the nozzle throat, namely liquid jet type in high Flow rate case and annular liquid film type in low Flow rate case, and have higher velocity as the nozzle divergent angle is smaller. The same trend was obserbed as amount of swirl was increased. Finally, energy conversion efficiency was compared among all conditions.
抄録全体を表示
-
中西 重康, 加治 増夫, 山内 庄司, 沢井 徹
1985 年 51 巻 463 号 p.
1026-1032
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
Behaviors of disturbance waves in an evaporating tube are experimentally investigated in high quality region using conductance probe method under the following conditions : pressure 2.95 Mpa, mass velocity 300, 500 and 700kg/(m
2 ·s), heat flux up to 1.2 MW/m
2 and thermodynamic quality larger than 0.80. As the results of comparison with air-water adiabatic data, it is found that the disturbance waves in the boiling steam-warter system has the following remarkable features ; a) the wave does not take sharp spike like form and has a log tail, b) scattering of the propagation speed is larger than that of the air-water system, c) the space separation of two neighboring wave does not vary significantiy with the quality. It is also confirmed that the disturbance waves have a close connection with the wall temperature fluctuation at the dryout region.
抄録全体を表示
-
土方 邦夫, 森 康夫, 長崎 孝夫, 野畑 邦夫
1985 年 51 巻 463 号 p.
1033-1041
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
Characteristics of one-component critical two-phase Flow through a capillary tube are investigated. It is experimentally shown that three kinds of Flow patterns exist, which are called steady Flow, periodic Flow, periodic Flow and unsteady Flow and the critical Flow rate varies with the Flow pattern for the same inlet condition. The dependencies of inlet subcooling and wall heat flux on the critical Flow rate are experimentally investigated for the steady and periodic Flow patterns. By considering void fraction and velocity distributions in a cross section of the pipe, the experimental results. It is clarified that the critical Flow rate is controlled by the heat transfer of liquid to bubbles and the position of nucreation site of boiling.
抄録全体を表示
-
植草 常雄, 東條 誠司, 河合 素直
1985 年 51 巻 463 号 p.
1042-1046
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
To improve tube-side heat transfer coefficients of air-cooled heat exchangers in air-conditioners, internal spiral-grooved tubes have been put to use in place of plain tube. In this report, local evaporating heat transfer coefficients have been measured for internal spiral-grooved tube with refrigerant R22. Experimental results show that the local heat transfer coefficients are estimated by and the reason why there is little dependence on quality is due to the effects of grooves. Further discussions will be developed in following paper.
抄録全体を表示
-
稲田 茂昭, 宮阪 芳喜, 西田 浩二
1985 年 51 巻 463 号 p.
1047-1053
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
This paper deals with transient heat transfer for a water drop impinging on a heated surface in the surface temperature range from maximum boiling rate point to the non-wetting region. The boiling curves were obtained by analyzing the transient temperature variation inside the heated surface taking account of the time variation of the area covered by the drop. By comparing the boiling curves obtained in this way with that for pool boiling, the heat flux in both cases increases with increasing subcooling, while the maximum heat flux point of the boiling curve was located on an extension of the nucleate pool boiling curve and that the boiling heat transfer for a drop on the heated surface was classified into four types according to the degree of subcooling and to the heated surface temperature.
抄録全体を表示
-
白井 紘行, 桐山 昭夫
1985 年 51 巻 463 号 p.
1054-1060
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
The equilibrium compositions, special absorption coefficient, emittance and transmittance of Si
3N
4 ablation layer plasmas have been calculated for temperatures of 3000K and 5000K, thickness of 0.01, 0.1 and pressures of 0.1, 1 and 10 atmospheres. Calculations of radiation include molecular bands, atomic lines, and continuum processes. The emittance and transmittance results are applied to a simple shock layer model to predict the effectiveness of the Si
3N
4, ablation layers for a blockage of the high-temperature stagnation shock layer radiation. The results show that the photoionization process in Si atom is most effective in blocking the radiation and the Si
3N
4 ablation layers are very effective in reducing the radiative heating to a vehicle.
抄録全体を表示
-
梶谷 修一
1985 年 51 巻 463 号 p.
1061-1065
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
A effect of high volatility droplets addition to the lean propane-air mixture on a burning velocity, using a inverted cone burner, has been investigated. The used droplets are methanol-water, ethanol-water and soap bubble encloses propane-air, hydrogen-air mixture. With these fuels, it is possible 1) to change the heat of combustion and latent heat of fuel droplets without a significant change of droplet diameter, 2) to change the fuel vapour quantity around the droplet, and 3) to produce any concentration of gas cloud in the case of soap bubble. The results are followings, 1) The effect of droplets on the increase of burning velocity is higher with the increase of heat of combustion and decrease of latent heat of droplet. 2) burning velocity is increased with high combustion velocity of gas in the sop bubble even if the latent heat is greater than that of combustion. 3) The addition of droplets would increase a area of reacting zone of combustion.
抄録全体を表示
-
伊藤 献一, 藤田 修
1985 年 51 巻 463 号 p.
1066-1070
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
The effects of NO on catalytic oxidation of methanol and HC were experimentally investigated. Prepared gas which contained N
2, O
2, C
3H
8, CH
3 OH and NO was passed through the oxidation and three-way catalysts designed for motor vehicles. The changes in unburned species were examined under the conditions of inlet temperature and space velocity ranges of 400∼525K and 2.5∼7.5 ×10
4/h, respectively. The presence of NO made the HC made the HC oxidation ratio high, but it made the methanol oxidation ratio low in the catalysts bed. Furthermore, it was observed that formaldehyde generation from methanol in the catalysts increased under the presence of NO. From these results, it can be concluded that NO emission plays an important role in the catalytic oxidation reaction. Thus, the effects of NO should be considered in the design on of motor vehicle catalyst.
抄録全体を表示
-
江波戸 智
1985 年 51 巻 463 号 p.
1071-1076
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
From the fuel evaluation test results, it was confirmed that the combustibility oFlow calorie gas which is essentially poorer is able to be evaluated by using the factors of its inflammable gas content and hydrogen gas content. And the weight loss rate of heavy oil is about 1/1.7 times that of distillate oil. So the flame tube reference velocity of a low calorie gas combustor is necessary to be decreased for obtaining its flame stability. But that of a heavy oil combustor is necessary to be kept higher for improving its evaporation rate, and the combustor length is necessary to be extended for increasing a residence time within a combustion zone. And it was finally confirmed from the combustion test results that this designing method is available for burning low grade fuels.
抄録全体を表示
-
平井 哲郎, 永井 伸樹, 小関 秀規, 加藤 恵ニ, 高堂 純治
1985 年 51 巻 463 号 p.
1077-1084
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
The results of an experimental test program to determine the combustion characteristics of high combustion intensity and low pollutant emissions are presented. Fine fuel spray with wide spray angle formed from a twin-fluid atomizer was effectively mixed with high-swirl air near the atomizer in the cylindrical combustion chamber, and could be fired under the conditions of combustion intensity up to 20 MW/m
3 to yield stable ignition and good combustion efficiency. NO
x emissions in exhaust gas were affected by combustion states, burnt gas temperatures and O
2 concentrations. They attained to maximum values at the air excess ratio of 1.1 ∼1.2 for each combustion condition and were prominantly reduced with increasing or decreasing or decreasing in air excess ratio.
抄録全体を表示
-
斎藤 俊彦, 久岡 聖, 坂本 守義
1985 年 51 巻 463 号 p.
1085-1090
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
A pot-type burner has been widely used for home heating appliances because of having several advantage such as wide turn-down ratio, low noise combustion, simple construction and so on. However, the most disadvantageous point is that the pot-type burner generally has a luminous, smoky flame. Therefore, soot emission and soot reduction of the pot-type burner has been studied semi-analytically and experimentally. (1) Soot emission of the pot-type burner can be explained by the simple calculation model which is determined by combining soot formation rate in the flame with soot recombustion rate in the combustion chamber. (2) Increase of primary air ratio in the premixed region leads to better soot emission. (3) Soot reduction of the pot-type burner can be obtained by combining the combustion process of conventional pot-type burner with that of vaporizing burner.
抄録全体を表示
-
庄司 秀夫
1985 年 51 巻 463 号 p.
1091-1098
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
For the purpose of analyzing the combustion process in a spark ignition engine, it is necessary to know the combustion temperature in the combustion chamber. The author has developed a new technique of measuring the combustion temperature using the sodium line reversal method. By this new technique, graduation of temperature is possible to the output of flame radiation from the combustion chamber. The distribution of flame temperature in the cylinder could be measured by this method even near the cylinder wall. For the purpose of measuring the flame temperature in the commercial engine cylinder, the compact sensor with prisms and optical fibers was developed. Measured value of these techniques are discussed for the various operating conditions of the engine.
抄録全体を表示
-
和栗 雄太郎, 小野 信輔, 高崎 講二, 田島 博士
1985 年 51 巻 463 号 p.
1099-1104
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
The fuel spray distribution and combustion characteristics in side-injection system have been investigated by making use of the special test engine equipped with a variable angle swirler. As the results of experiments, following items have been clarified. In side-injection system, higher swirl intensity is necessary at combustion stage than central-injection system. Therefore the swirl acceleration by piston bowl during compression stroke is effective to improve the combustion characteristics. For the optimization of combustion system, it is important to find out the optimum combination of shape of combustion chamber and initial swirl intensity. When the residual fuel is used, optimization of sharp of combustion chamber becomes more important. For example, spherical bowl type combustion chamber can achieve better specific fuel consumption with smaller initial swirl intensity than flat-bottom bowl type.
抄録全体を表示
-
志賀 聖一, 江原 秀治, 柄沢 隆夫, 倉林 俊雄
1985 年 51 巻 463 号 p.
1105-1112
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
By using a direct injection diesel engine, the effect of exhaust gas recirculation (EGR) on soot emission was investigated. It was revealed that EGR had both effects of soot promotion and suppression. Soot emission was suppressed when the premixed (initial rapid) combustion fraction of the two combustion patterns was increased, which was accomplished by throttling the intake valve equipped the engine or advancing the injection timing. It was also suggested that the effect of EGR on soot emission should not ascribe only the physical or thermal properties of the inert gases within the exhaust gas, but some chemical properties of CO
2. Because it was shown that only CO
2 had the effect of soot suppression under some conditions.
抄録全体を表示
-
佐藤 豪, 今塚 勝雄, 澤田 隆, 飯田 訓正
1985 年 51 巻 463 号 p.
1113-1120
発行日: 1985/03/25
公開日: 2008/03/28
ジャーナル
フリー
A freezing dilution mini-tunnel method is described which allows sampling of diesel exhaust particulates with independent control of the diluted gas temperature T
d and collecting mesh surface temperature T
w. Particulates in the diluted gas are caught on the cooled mesh surface kept the low temperature with liquid air at T
w. This tunnel was examined to determine the individual effect of these two operating variables T
d, T
w on the samples collected just behind an exhaust valve of a single-cylinder direct-injection test engine run at constant speed and load. Either decreasing diluted gas temperature or sampling mesh surface temperature resulted in an increase of particulate diameter and coagulation of liquidwise particulates and cohesion of particulates.
抄録全体を表示