A simple and sensitive method for the determination of moenomycin A residues in livestock products using LC-MS/MS was developed. Moenomycin A, a residual definition of flavophospholipol, was extracted from samples with a mixture of ammonium hydroxide and methanol (1 : 9, v/v) preheated at 50℃. The crude extracted solutions were evaporated and purified by liquid–liquid partitioning between a mixture of ammonium hydroxide, methanol and water (1 : 60 : 40, v/v/v) and ethyl acetate. The alkaline layer was taken, and cleaned up using a strong anion exchange (InertSep SAX) solid phase extraction cartridge. The LC separation was performed on an Inertsil C8 column with liner gradient elution using 0.3 vol% formic acid and acetonitrile containing 0.3 vol% formic acid. Moenomycin A was detected using tandem mass spectrometry with negative ion electrospray ionization. Recovery tests were conducted using three porcine samples (muscle, fat and liver) and chicken eggs. Samples were spiked with moenomycin A at 0.01 mg/kg and at the Japanese Maximum Residue Limits (MRLs) established for each sample. The trueness ranged from 79 to 93% and precision ranged from 0.5 to 2.8%. The limit of quantification (S/N≥10) of the developed method is 0.01 mg/kg. The developed method would thus be very useful for regulatory monitoring of flavophospholipol in livestock products.

The growth and gas production test for Escherichia coli in the microbiological examination of food additives is stipulated in the ninth edition of Japan’s Specifications and Standards for Food Additives (JSFA) and described as a part of the “Confirmation Test for Escherichia coli” in “Microbial Limit Tests” in the same manuscript. The growth and gas production test for E. coli indicated that the positive or negative of “gas production and/or turbidity” in EC broth should be confirmed after incubating at 45.5±0.2℃ for 24±2 h. If both gas production and turbidity are negative, the culture is additionally incubated up to 48±2 h to determine E. coli contamination. The internationally referenced Bacteriological Analytical Manual of the U.S. FDA had revised the incubation temperature in tests for coliforms and E. coli from 45.5±0.2℃ to 44.5±0.2℃ in 2017. Therefore, we conducted research in anticipation of this temperature change being reflected in the microbiological examination of the JSFA. We used seven EC broth products and six food additives across eight products that are available in Japan in order to compare the growth and gas production at temperatures of 45.5±0.2℃ and 44.5±0.2℃ of E. coli NBRC 3972, which is designated as the test strain in JSFA. Both with/without food additives, the number of EC broth products in which medium turbidity and gas production by the strain were positive in three out of three tubes at all test times was greater at 44.5±0.2℃ than at 45.5±0.2℃. These results suggest that the growth and gas production test for E. coli could be more appropriately conducted by incubation at 44.5±0.2℃ in the “Confirmation Test for Escherichia coli” for E. coli in the JSFA in comparison to 45.5±0.2℃. Furthermore, there were differences in the growth and gas production of E. coli NBRC 3972 depending on the EC broth product used. Therefore, the importance of “Media growth promotion test” and “Method suitability test” in the ninth edition of the JSFA should be emphasized.

The official specifications for food additives from natural sources list the species according to their scientific and Japanese names, thereby providing a unique identifier for the species. This helps to prevent the use of nonprescribed species, which might cause unexpected or unintended health hazards. However, there are cases in which the names of the source species listed in the official specifications differ from the accepted scientific names based on the latest taxonomic research. In this paper, we argue that it is more important to define scientific and Japanese names with an emphasis on traceability in order to control the range of food additive ingredients in a rational and sustainable manner. Therefore, we proposed a method for ensuring traceability as well as a specific notation procedure for scientific and Japanese names. Using this method, we examined the source species for three food additives. In some cases, the range of sources species expanded with the change in scientific names. Ensuring traceability is extremely important, but it is also necessary to confirm whether unexpected species are included when names are changed.

The applicability of a method for simultaneous analysis of Acromelic acids A, B, and Clitidine, which are venomous constituents of Paralepistopsis acromelalga, was assessed for three simulations: tempura, chikuzenni, and soy sauce soup. All components were detectable for all cooking methods. No interfering peak affecting the analysis was observed. The findings indicate that samples of leftover cooked products can be used to ascertain causes of food poisoning by Paralepistopsis acromelalga. Additionally, results showed that most of the toxic components were eluted into the soup broth. This property is useful for rapid screening for Paralepistopsis acromelalga in edible mushrooms.

Benzoic acid (BA) is typically found in natural food; therefore, naturally occurring BA must be distinguished from added BA preservatives. In this study, we investigated BA levels in 100 samples of fruit products and their fresh fruits as raw materials using dialysis and steam distillation approaches. BA was detected in the range (minimum–maximum) of 2.1–1380 μg/g and 2.2–1950 μg/g in dialysis and steam distillation, respectively. Steam distillation indicated higher BA levels than dialysis.